9 More Discussions You Might Find Interesting
1. Hardware
Hi everyone
(see attachments)
I bought an HP Elitebook 8460p on eBay and it came with a password-locked Hitachi hard drive which I was told is the original hard drive. I don't know the password for the drive and running the diagnostics tools I see the hard drive is healthy. I tried booting... (9 Replies)
Discussion started by: milhan
9 Replies
2. Solaris
To Solaris 8 Experts,
Please let me know what's the best method / procedure as well as the Solaris 8 commands for accomplishing the following tasks on a production Sun Enterprise 250 Server running Sun Solaris 8 Operating System:
1. Make an exact image/copy of the SCSI Hard Drive in the... (3 Replies)
Discussion started by: ssabet
3 Replies
3. SCO
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
1 Replies
4. Solaris
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies
5. Filesystems, Disks and Memory
Hi Guys,
I have an external USB Hard Disk Drive on which I have 3 partitions and it works fine under Windows XP but when I am using Red Hat Linux 5 I don't see any icon for this USB HDD. Also I am not able to browse my USB Pen Drive. However, I can use it under Mandrake Linux without any... (4 Replies)
Discussion started by: indiansoil
4 Replies
6. UNIX for Advanced & Expert Users
trying to setup a sata drive using a sata to scsi adaptor
I have a sata 1TB Deskstar that I had setup before and during shipment from a facilty to another, the disk failed. The handling was not great, lots of throwing boxes, etc. I have a new disk from Hitachi (thankyou Hitachi) anyway, I don't... (1 Reply)
Discussion started by: mndavies
1 Replies
7. UNIX for Dummies Questions & Answers
Someone gave me a small external SCSI hard drive for my SunOS 5.8 test system. How do I make Unix see the hard drive? (2 Replies)
Discussion started by: FredSmith
2 Replies
8. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
9. UNIX for Dummies Questions & Answers
thanks for your help, i didnt realise you could download the operating system from sun.com:D
Ive just had a new hard drive installed 20 GIG for unix and x windows. How can i connect this hard drive for unix and x windows only? and are there any helpful tutorials for starters??
Many thanks (4 Replies)
Discussion started by: jeffersno1
4 Replies
SMARTCTL(8) System Manager's Manual SMARTCTL(8)
NAME
smartctl - S.M.A.R.T. control utility
SYNOPSIS
smartctl [-cdeglostv] [device]
DESCRIPTION
smartctl controls the Self-Monitoring, Analysis and Reporting Technology System(S.M.A.R.T.) built into ATA-3 and later IDE and SCSI-3 Hard
Drives. This is used to check the reliability of the hard drive and predict drive failures. TapeAlerts support for SCSI tape drives and
changers smartctl is command line utility designed to perform simple S.M.A.R.T. tasks.
OPTIONS
smartctl accepts two agruments, options and device in respective order. The options begin with a '-' and multiple options should be begun
with a single '-'. The second argument is the device to be controled. ATA device use the form "/dev/hd*" and SCSI devices use the form
"/dev/sd*". SCSI devices use only options a,i,c,e,d. For SCSI Tape Drives and Changers with TapeAlerts support use the form "/dev/st*" and
"/dev/sg*". TapeAlerts devices use only a,i,c,e,d.
i Check if the device supports S.M.A.R.T
c Check if device has any S.M.A.R.T. Warranty Failures
g Prints only the generic S.M.A.R.T. attributes
v Prints only the vendor specific S.M.A.R.T. attributes
t Prints only the vendor specific S.M.A.R.T. thresholds
l Prints only the S.M.A.R.T. error log
a Prints all parameters for c,i,g,v,t,l (for SCSI c,i)
e Enables S.M.A.R.T. on device
d Disables S.M.A.R.T. on device
t Enables S.M.A.R.T. automatic offline self test timer which scans the drive every four hours for disk defects.
T Disables S.M.A.R.T. automatic offline self test timer
O Runs S.M.A.R.T. Immediate off-line Test
S Runs S.M.A.R.T. Short Self Test ( usually under ten minutes)
s Runs S.M.A.R.T. Short Self Test in Captive Mode.
( WARNING: This test will busy out drive for length of test. Only run this on drives without any mounted partitions.)
X Runs S.M.A.R.T. Extended Self Test ( tens of minutes)
x Runs S.M.A.R.T. Extended Self Test in Captive Mode. ( WARNING: This test will busy out drive for length of test. Only run this on
drives without any mounted partitions.)
A Aborts Non-Captive S.M.A.R.T. Tests.
EXAMPLES
smartctl -a /dev/hda - prints all S.M.A.R.T. infomration for drive /dev/hda (Primary Master)
smartctl -d /dev/hdd - disable S.M.A.R.T. on drive /dev/hdd (Secondary Slave)
AUTHOR
Michael Cornwell, cornwell@acm.org
Concurrent Systems Laboratory
Jack Baskin School of Engineering
University of California Santa Cruz
http://csl.cse.ucsc.edu/
smartctl-2.1 September 13, 2001 SMARTCTL(8)