LOCKTEST(1) Test Suite LOCKTEST(1)NAME
locktest - Find differences in locking between two SMB servers
SYNOPSIS
locktest {//server1/share1} {//server2/share2} [-U user%pass] [-U user%pass] [-s seed] [-o numops] [-a] [-O] [-E] [-Z] [-R range] [-B base]
[-M min]
DESCRIPTION
locktest is a utility for detecting differences in behaviour in locking between SMB servers. It will run a random set of locking operations
against //server1/share1 and then the same random set against //server2/share2 and display the differences in the responses it gets.
This utility is used by the Samba team to find differences in behaviour between Samba and Windows servers.
OPTIONS -U user%pass
Specify the user and password to use when logging on on the shares. This parameter can be specified twice (once for the first server,
once for the second).
-s seed
Seed the random number generator with the specified value.
-o numops
Set the number of operations to perform.
-a
Print the operations that are performed.
-A
Backtrack to find minimal number of operations required to make the response to a certain call differ.
-O
Enable oplocks.
-u
Hide unlock fails.
-E
enable exact error code checking
-Z
enable the zero/zero lock
-R range
set lock range
-B base
set lock base
-M min
set min lock length
-k
Use kerberos
VERSION
This man page is correct for version 4.0 of the Samba suite.
SEE ALSO
Samba
AUTHOR
This utility is part of the Samba[1] suite, which is developed by the global Samba Team[2].
locktest was written by Andrew Tridgell.
This manpage was written by Jelmer Vernooij.
NOTES
1. Samba
http://www.samba.org/
2. Samba Team
http://www.samba.org/samba/team/
Samba 4.0 06/17/2014 LOCKTEST(1)
Check Out this Related Man Page
SMBTORTURE(1) Test Suite SMBTORTURE(1)NAME
smbtorture - Run a series of tests against a SMB server
SYNOPSIS
smbtorture {//server/share} [-d debuglevel] [-U user%pass] [-k] [-N numprocs] [-n netbios_name] [-W workgroup] [-o num_operations]
[-e num files(entries)] [-O socket_options] [-m maximum_protocol] [-L] [-c CLIENT.TXT] [-t timelimit] [-C filename] [-A]
[-p port] [-s seed] [-f max_failures] [-X] {BINDING-STRING|UNC} {TEST1} [TEST2] [...]
DESCRIPTION
smbtorture is a testsuite that runs several tests against a SMB server. All tests are known to succeed against a Windows 2003 server (?).
Smbtorture's primary goal is finding differences in implementations of the SMB protocol and testing SMB servers.
Any number of tests can be specified on the command-line. If no tests are specified, all tests are run.
If no arguments are specified at all, all available options and tests are listed.
Binding string format
The binding string format is:
TRANSPORT:host[flags]
Where TRANSPORT is either ncacn_np for SMB, ncacn_ip_tcp for RPC/TCP or ncalrpc for local connections.
'host' is an IP or hostname or netbios name. If the binding string identifies the server side of an endpoint, 'host' may be an empty
string.
'flags' can include a SMB pipe name if using the ncacn_np transport or a TCP port number if using the ncacn_ip_tcp transport, otherwise
they will be auto-determined.
other recognised flags are:
sign
enable ntlmssp signing
seal
enable ntlmssp sealing
connect
enable rpc connect level auth (auth, but no sign or seal)
validate
enable the NDR validator
print
enable debugging of the packets
bigendian
use bigendian RPC
padcheck
check reply data for non-zero pad bytes
For example, these all connect to the samr pipe:
o ncacn_np:myserver
o ncacn_np:myserver[samr]
o ncacn_np:myserver[\pipe\samr]
o ncacn_np:myserver[/pipe/samr]
o ncacn_np:myserver[samr,sign,print]
o ncacn_np:myserver[\pipe\samr,sign,seal,bigendian]
o ncacn_np:myserver[/pipe/samr,seal,validate]
o ncacn_np:
o ncacn_np:[/pipe/samr]
o ncacn_ip_tcp:myserver
o ncacn_ip_tcp:myserver[1024]
o ncacn_ip_tcp:myserver[1024,sign,seal]
o ncalrpc:
UNC Format
The UNC format is:
//server/share
OPTIONS -d debuglevel
Use the specified Samba debug level. A higher debug level means more output.
-U user%pass
Use the specified username/password combination when logging in to a remote server.
-k
Use kerberos when authenticating.
-W workgroup
Use specified name as our workgroup name.
-n netbios_name
Use specified name as our NetBIOS name.
-O socket_options
Use specified socket options, equivalent of the smb.conf option "socket options". See the smb.conf(5) manpage for details.
-m max_protocol
Specify the maximum SMB dialect that should be used. Possible values are: CORE, COREPLUS, LANMAN1, LANMAN2, NT1
-s seed
Initialize the randomizer using seed as seed.
-L
Use oplocks.
-X
Enable dangerous tests. Use with care! This might crash your server...
-t timelimit
Specify the NBENCH time limit in seconds. Defaults to 600.
-p ports
Specify ports to connect to.
-c file
Read NBENCH commands from file instead of from CLIENT.TXT.
-A
Show not just OK or FAILED but more detailed output. Used only by DENY test at the moment.
-C filename
Load a list of UNC names from the specified filename. Smbtorture instances will connect to a random host from this list.
-N numprocs
Specify number of smbtorture processes to launch.
-o num_operations
Number of times some operations should be tried before assuming they're output is consistent (default:100).
-e num_files
Number of entries to use in certain tests (such as creating X files) (default: 1000).
-f max_failures
Number of failures before aborting a test (default: 1).
VERSION
This man page is correct for version 4.0 of the Samba suite.
SEE ALSO
Samba
AUTHOR
This utility is part of the Samba[1] suite, which is developed by the global Samba Team[2].
smbtorture was written by Andrew Tridgell.
This manpage was written by Jelmer Vernooij.
NOTES
1. Samba
http://www.samba.org/
2. Samba Team
http://www.samba.org/samba/team/
Samba 4.0 06/17/2014 SMBTORTURE(1)