sane-hp3500(5) SANE Scanner Access Now Easy sane-hp3500(5)NAME
sane-hp3500 - SANE backend for Hewlett-Packard ScanJet 3500 series scanners
DESCRIPTION
The sane-hp3500 library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Hewlett-Packard USB
flatbed scanners:
ScanJet 3500C
ScanJet 3530C
ScanJet 3570C
If you own a scanner other than the ones listed above that works with this backend, please let us know this by sending the scanner's exact
model name and the USB vendor and device ids (e.g. from /proc/bus/usb/devices, sane-find-scanner or syslog) to us. Even if the scanner's
name is only slightly different from the models mentioned above, please let us know.
CONFIGURATION
None required.
FILES
/usr/lib64/sane/libsane-hp3500.a
The static library implementing this backend.
/usr/lib64/sane/libsane-hp3500.so
The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_HP3500 If the library was compiled with debug support enabled, this environment variable controls the debug level for this back-
end. Higher debug levels increase the verbosity of the output.
Example: export SANE_DEBUG_HP3500=4
SEE ALSO sane(7), sane-usb(5),
http://projects.troy.rollo.name/rt-scanners/
AUTHOR
Troy Rollo <sane@troy.rollo.name>
13 Jul 2008 sane-hp3500(5)
Check Out this Related Man Page
sane-hp5590(5) SANE Scanner Access Now Easy sane-hp5590(5)NAME
sane-hp5590 - SANE backend for Hewlett-Packard 4500C/4570C/5500C/5550C/5590/7650 Workgroup/Document scanners
DESCRIPTION
The sane-hp5590 library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Hewlett-Packard Work-
group/Document scanners:
ScanJet 4500C
ScanJet 4570C
ScanJet 5500C
ScanJet 5550C
ScanJet 5590
ScanJet 7650
If you own a scanner other than the ones listed above that works with this backend, please let us know this by sending the scanner's exact
model name and the USB vendor and device ids (e.g. from /proc/bus/usb/devices, sane-find-scanner or syslog) to us. Even if the scanner's
name is only slightly different from the models mentioned above, please let us know.
CONFIGURATION
None required.
FILES
/usr/lib64/sane/libsane-hp5590.a
The static library implementing this backend.
/usr/lib64/sane/libsane-hp5590.so
The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_HP5590
If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher
debug levels increase the verbosity of the output. See used levels below.
Level 10 - generic processing
Level 20 - verbose backend messages
Level 40 - HP5590 high-level commands
Level 50 - HP5590 low-level (USB-in-USB) commands
Example:
export SANE_DEBUG_HP5590=50
SEE ALSO sane(7), sane-usb(5),
AUTHOR
Ilia Sotnikov <hostcc@gmail.com>
13 Jul 2008 sane-hp5590(5)
Hello, I hope somebody can help me. I have a new scanner, that says this:
"EPSON Scan does not support the UNIX File System (UFS) for Mac OS X. You must install EPSON Scan on a disk or in a partition that does not use UFS."
I have UFS.. is there anything I can do? How do I create/find such a... (0 Replies)
Hi
I am writing a piece of code using gcc-3.4.4 which uses usb library (-lusb) to interact with a small robot, getting inputs from sensors and sending commands back to motors.
Now my problem is that when I use ncurses library in my code to get use of keyboard functionalities, the usb inputs do... (1 Reply)
1, How and from where to downlode scanner and camers hardware in my pc , my computer software dosent have Scanner and caraea hardware. Ecperts & SW plz let me know
2, where do downlode LAN local area net in PC when my another PC LAN software is not working (1 Reply)
Hi, somewhat of a newbie with Linux, although I have been at it for about three weeks now.
Is there a way to wake up or initialize my scanner with a command in the terminal? (6 Replies)
Hey Guys and Gals, Im a complete Noob to Unix. But recently have started working on a unix system for my PET/CT scanner. My scanner comes with a MOD drive for backup. I would like to back up to USB (its alot cheaper). But the only way to do so is by manually enterin the unix commands. Id like to... (13 Replies)
Running Debian 8.5 on a Dell Laptop
I have an Epson V39 scanner. Simple scan cannot detect it.
Here is what I have:
root@server1:/home/server1# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first... (2 Replies)