cpufreqd-get(1)cpufreqd-get(1)NAME
cpufreqd-get - Issues "get" commands to cpufreqd.
SYNTAX
cpufreqd-get [-l]
PARAMETERS -l list applied Profiles for all cpus.
DESCRIPTION
cpufreqd-get issues a command to cpufreqd and reads the returned output. When run without arguments it will issue a "LIST_PROFILES" com-
mand, useful for usage with cpufreqd-set. See the PARAMETERS above for more.
COMMANDS
LIST_PROFILES
cpufreqd-get
Name (#1): On Demand High
Active on CPU#: 0, 1
Governor: ondemand
Min freq: 1000000
Max freq: 1833000
Name (#2): On Demand Low
Governor: ondemand
Min freq: 1000000
Max freq: 1333000
LIST_APPLIED_PROFILES
cpufreqd-get -l
CPU#0: "High Speed 1" ondemand 731500-997500
Near the name (between the parenthesis) you can find the index number to use when setting a specific profile with cpufreqd-set.
AUTHORS
Mattia Dongili <malattia@linux.it>
SEE ALSO cpufreqd-set(1), cpufreqd(8), cpufreqd.conf(5)Mattia Dongili 2.2.0 cpufreqd-get(1)
Check Out this Related Man Page
CPUFREQD(8)CPUFREQD(8)NAME
cpufreqd - intelligently monitor and manipulate CPU frequency
SYNOPSIS
cpufreqd [-Dmhv] [-f filename] [-V verbosity]
DESCRIPTION
cpufreqd is used to monitor the status of the system and adjust the frequency of the CPU according to the user configuration. The behav-
iour of the daemon is fully configurable. Logs are reported through syslogd.
PARAMETERS -D, --no-daemon
stay in foreground (used to debug).
-m, --manual
start in manual mode.
-f filename, --file=filename
Specify the configuration file to read. The default is /etc/cpufreqd.conf.
-h, --help
Display command line help.
-v, --version
Display the version number of the daemon.
-V, --verbosity
verbosity level from 0 (less verbose) to 7 (most verbose). Default verbosity is 4
SIGNALS
SIGHUP This lets cpufreqd perform a re-initialization. The configuration file (default is /etc/cpufreqd.conf) will be re-read and probes
re-done. (Not yet implemented in cpufreqd-2.0)
SIGINT, SIGTERM
cpufreqd will terminate.
EXAMPLES
/usr/sbin/cpufreqd -D
NOTES
Some ACPI implementations are very cpu-consuming when reading the info file of
system batteries. Cpufreqd implements a simple workaround that avoids reading that file except on initialization or reinitializa-
tion. This has the effect of needing to send an HUP signal if inserting a new battery, otherwise battery measurement won't be cor-
rect.
FILES
/sys/devices/system/cpu/cpu*/cpufreq
kernel cpu frequency interface
/proc/cpufreq
old deprecated kernel cpu frequency interface (please avoid it)
/proc/acpi
kernel power management interface (ACPI)
/proc/apm
kernel power management interface (APM)
/proc/pmu
kernel power management interface (PMU). (Not yet implemented in cpufreqd-2.0)
/etc/cpufreqd.conf
cpufreqd configuration file
SEE ALSO cpufreqd.conf(5),syslogd(8),cpufreqd-set(1),cpufreqd-get(1)BUGS
Multiple CPUs are not considered separately thus the same policy is set in every available CPU. Battery can only be specified in percent,
not in minutes remaining.
AUTHOR
George Staikos <staikos@0wned.org>
Mattia Dongili <malattia@linux.it>
Rene Rebe <rene@rocklinux.org>
05 May 2005 CPUFREQD(8)
Hi,
I have my input as follows :
I have given two entries-
From system Mon Aug 1 23:52:47 2005
Source !100000006!:
Impact !100000005!: High
Status ! 7!: New
Last Name+!100000001!:
First Name+ !100000003!:
... (4 Replies)
I have Exceed on Demand V3.2 (I know it's older). I have multiple monitors at my desk and can move the x-windows across both monitors but can only type in monitor(A). I can resize windows in both monitors(A & B) and can clearly tell "window focus" is gained in the window for the monitor(B) for... (2 Replies)
Hi all,
Can any one please tell me how to find these in Unix (Commands)
1. Too many processes connected to the server.
2. High Utilization of CPU.
3. Maximum Number of connections with the database.
OS: Sun Solaris 5.8
DB : Oracle 10g
Thanks and Regards,
Prashanth (1 Reply)
I am trying to read a file and skip few records based upon the following two columns. Pipe delimiter used between the two columns.
Column1|Column2
Property|CutOff
Target|11111
Min|9999
Max|10000
Comment|This is a test
Property|Weight
Target|222
Min|3434
Max|77777
UOM|mm ... (5 Replies)
Need to find CPU Speed of zLinux.
The commands like cat /proc/cpuinfo and /usr/bin/cpufreq-info does not gave me the expected results.
/usr/bin/cpufreq-info prints the
....
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
analyzing CPU 1:
no or unknown cpufreq... (1 Reply)
Hello All
I have a system running AIX 61 shared uncapped partition (with 11 physical processors, 24 Virtual 72GB of Memory) .
The output from NMON, vmstat show a high run queue (60+) for continous periods of time intervals, but NO paging, relatively low I/o (6000) , CPU % is 40, Low network.... (9 Replies)
I have a system with the following settings:
min:0.10
Assigned: 2.0
Max: 6.0
Partition is uncapped weight is 128.
I would like to know if even if this is uncapped, is the max it can use 6?
The actual pool has 16.
I remember reading about this somewhere but I don't remember can anyone... (3 Replies)