Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

cpuid(1) [debian man page]

CPUID(1)						      General Commands Manual							  CPUID(1)

NAME
cpuid - program to find the CPUID of Intel and AMD x86 processors SYNOPSIS
cpuid DESCRIPTION
This manual page documents briefly the cpuid program. This manual page was written for the Debian distribution, because the original program does not have a manual page. cpuid is a program to find the CPUID information of the Intel or AMD x86 processors. OPTIONS
The program does not have any options. AUTHOR
This manual page was written by Ramakrishnan M <rkrishnan@debian.org> and modified by Aurelien GEROME <ag@roxor.cx> for the Debian GNU/Linux system (but may be used by others). October 23, 2006 CPUID(1)

Check Out this Related Man Page

CPUID(4)						     Linux Programmer's Manual							  CPUID(4)

NAME
cpuid - x86 CPUID access device DESCRIPTION
CPUID provides an interface for querying information about the x86 CPU. This device is accessed by lseek(2) or pread(2) to the appropriate CPUID level and reading in chunks of 16 bytes. A larger read size means multiple reads of consecutive levels. The lower 32 bits of the file position is used as the incoming %eax, and the upper 32 bits of the file position as the incoming %ecx, the latter intended for "counting" eax levels like eax=4. This driver uses /dev/cpu/CPUNUM/cpuid, where CPUNUM is the minor number, and on an SMP box will direct the access to CPU CPUNUM as listed in /proc/cpuinfo. This file is protected so that it can be read only by the user root, or members of the group root. NOTES
The CPUID instruction can be directly executed by a program using inline assembler. However this device allows convenient access to all CPUs without changing process affinity. Most of the information in cpuid is reported by the kernel in cooked form either in /proc/cpuinfo or through subdirectories in /sys/devices/system/cpu. Direct CPUID access through this device should only be used in exceptional cases. The cpuid driver is not auto-loaded. On modular kernels you might need to use the following command to load it explicitly before use: $ modprobe cpuid There is no support for CPUID functions that require additional input registers. Very old x86 CPUs don't support CPUID. SEE ALSO
Intel Corporation, Intel 64 and IA-32 Architectures Software Developer's Manual Volume 2A: Instruction Set Reference, A-M, 3-180 CPUID ref- erence. Intel Corporation, Intel Processor Identification and the CPUID Instruction, Application note 485. COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 2009-03-31 CPUID(4)
Man Page