FCD_NFM_RX(1) User Commands FCD_NFM_RX(1)NAME
fcd_nfm_rx - Narrow band FM receiver example
DESCRIPTION
FunCube Dongle Narrowband FM receiver
OPTIONS -h, --help
show this help message and exit
--device
Audio input device (default=hw:1)
--freq RF frequency in kHz (defaualt=145500)
--gain LNA gain in dB (default=20)
The FunCube Dongle device appears as a stereo sound card, supported by ALSA drivers. The device to specify is the ALSA device corresponding
to the dongle, from which receiver IQ data is fetched. This application sends demodulated audio out to the default ALSA soundcard output.
The FunCube Dongle device needs to have recent updated firmware. See the qthid-fcd-controller package for tools to update the firmware:
qthid and qthid-2.2 applications.
The Funcube Dongle is a software defined radio receiver in a USB stick covering 64 MHz - 1.7 GHz. More info about the Funcube Dongle is
available at http://www.funcubedongle.com/
SEE ALSO qthid(1)uhd_rx_cfile(1)uhd_rx_nogui(1)uhd_siggen(1)uhd_siggen_gui(1)FCD_NFM_RX 3.5.3 April 2012 FCD_NFM_RX(1)
Check Out this Related Man Page
qthid-2.2(1) OZ9AEC qthid-2.2(1)NAME
qthid - simple controller for the Funcube Dongle SDR
SYNOPSIS
qthid
DESCRIPTION
This program is a Graphical User Interface to control a radio receiver called the Funcube Dongle SDR. This program was written mainly by
Alexandru Csete, OZ9AEC based upon initial code from Howard Long, G6LVB.
For more information on the FUNcube project please visit http://www.funcube.org.uk/ and the latest on the FUNcube SDR dongle visit
http://www.funcubedongle.com/
You can use qthid-2.2 to upgrade your firmware to 18f or later.
With the newer firmware installed, running the qthid program will allow use of the full features available with newer firmware.
SEE ALSO qthid(1), gnuradio(1), gqrx(1)AUTHOR
This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).
COPYRIGHT
Copyright (c) 2012 A. Maitland Bottoms <bottoms@debian.org>
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
QTHID 2.2 qthid-2.2(1)
SCO 5.07: How do I copy files to a USB memory stick?
The stick is formatted as a hd and has an active Unix partition using the hole stick for Unix.
How do I get acces to the stick? (1 Reply)
what program(s) will i need, for either windows 7 or ubuntu (i have both installed on my HDD), to install onto a SD card, and how big should the memory stick be for this? the ISO is about 230mb (rounded up) and the SD card i plan to use is 512mb. (3 Replies)
Hi,
Is someone knows how or maybe the caused why my USB 3G dongle doesn't work when plug-in after boot the /dev/ttyUSB*
I wonder how this /dev/ttyUSB1-4 works, i had a 3G USB dongle for my internet connection before i used lucyd lynx this the same USB dongle works fine when i plug-in after... (2 Replies)
Hello all,
I have created a UDP multicast transmitter and receiver, first using windows. But now I need the receiver to run on Ubuntu 10.04.
The code is the following:
/************************** Receiver *************************/
// Module Name: Receiver.c
//
// Description:
// ... (0 Replies)
Hi,
Please tell me what is sendmail masquarade and what is the use of it?
Its pretty confusing :eek:..
Is it all about like when mail is sent from sender to receiver, the receiver cannot see the hostname/internal username of sender..
And I found they constitute various classes like class... (0 Replies)
we asked to create a sender and receiver for a signals. sender knows his receiver by it's(receiver) PID .... my question is if i go to other computer and run my program will the pid chages than the first pid i got from old computer? (2 Replies)
Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message.
XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz
Free space: 97MB
Making sure mount point is clear
umount: /media/usb_msd is not mounted (according to mtab)
Trying... (2 Replies)