OPENSC-TOOL(1) OpenSC tools OPENSC-TOOL(1)NAME
opensc-tool - generic smart card utility
SYNOPSIS
opensc-tool [OPTIONS]
DESCRIPTION
The opensc-tool utility can be used from the command line to perform miscellaneous smart card operations such as getting the card ATR or
sending arbitrary APDU commands to a card.
OPTIONS --info, -i
Print information about OpenSC, such as version and enabled components
--atr, -a
Print the Answer To Reset (ATR) of the card, output is in hex byte format
--name, -n
Print the name of the inserted card (driver)
--serial
Print the card serial number (normally the ICCSN), output is in hex byte format
--send-apdu apdu, -s apdu
Sends an arbitrary APDU to the card in the format AA:BB:CC:DD:EE:FF...
--list-files, -f
Recursively lists all files stored on card
--list-readers, -l
Lists all configured readers
--list-drivers, -D
Lists all installed card drivers
--reader num, -r num
Use the given reader number. The default is 0, the first reader in the system.
--card-driver driver, -c driver
Use the given card driver. The default is auto-detected.
--wait, -w
Wait for a card to be inserted
--verbose, -v
Causes opensc-tool to be more verbose. Specify this flag several times to enable debug output in the opensc library.
SEE ALSO opensc-explorer(1)opensc 06/03/2012 OPENSC-TOOL(1)
Check Out this Related Man Page
OPENSC-TOOL(1) OpenSC Tools OPENSC-TOOL(1)NAME
opensc-tool - generic smart card utility
SYNOPSIS
opensc-tool [OPTIONS]
DESCRIPTION
The opensc-tool utility can be used from the command line to perform miscellaneous smart card operations such as getting the card ATR or
sending arbitrary APDU commands to a card.
OPTIONS --atr, -a
Print the Answer To Reset (ATR) of the card. Output is in hex byte format
--card-driver driver, -c driver
Use the given card driver. The default is auto-detected.
--info, -i
Print information about OpenSC, such as version and enabled components.
--list-drivers, -D
List all installed card drivers.
--list-files, -f
Recursively list all files stored on card.
--list-readers, -l
List all configured readers.
--name, -n
Print the name of the inserted card (driver).
--reader num, -r num
Use the given reader number. The default is 0, the first reader in the system.
--send-apdu apdu, -s apdu
Sends an arbitrary APDU to the card in the format AA:BB:CC:DD:EE:FF....
--serial
Print the card serial number (normally the ICCSN). Output is in hex byte format
--verbose, -v
Causes opensc-tool to be more verbose. Specify this flag several times to enable debug output in the opensc library.
--wait, -w
Wait for a card to be inserted.
SEE ALSO opensc-explorer(1)opensc 06/17/2014 OPENSC-TOOL(1)
Okay, I succesfully installed Redhat Linux 7.2 on my comp. I got some Linux drivers for my network card off the manufacturers site, but said driver is just some C source code. Does anybody have any idea what I do with it? Sorry for being vague... any help is greatly appreciated. (4 Replies)
i can't find any info on developing for magnetic card readers in the unix environment. I'm developing a POS system and i want it to include credit card verification. Any direction would be hot... (6 Replies)
HI.
i have two monitor and two video card in one system, i want use both of the monitor, i am currently using redhat 7.2 and solaris 8, i was wondering if someone can help me set my system as a dual monitor, basically it called dual head in redhat but i dont' know what it called in sun. Im tring... (4 Replies)
Does anyone know how to configure a generic serial card within SCO Unix ???? Any specific driver ?
Any help will be greatly appreciated
CHRIS (7 Replies)
Hi,
I'm looking for a command to be able to disable a network card under the boot PROM.
I need it to force my Jumpstart to use the Ethernet card of my server (V880) instead of my fiber card (gem0).
Thanks,
Fabien (6 Replies)
Dear experts
I need to know how can I check the type of graphic card and it specifications already installed on my Solaris 8 Ultra 60 workstation.
Regards
reza (5 Replies)
All,
Is there a way to identify which fiber card (brand) I have in my system? I believe my solaris 8 box has an LP9002LE card, I'm just not 100% sure.
Thanks,
Kevin (4 Replies)
I've had no luck with help on linuxquestions so I figured I'd try here. I'm using debian etch.
The problem is that I can not install my network card because it says:
Makefile:62: *** Linux kernel source not found. Stop.
I have the kernel-headers installed.
I've looked all over the... (9 Replies)
Hi
I've a problem with Hp-ux 11.11 9000/800/rp3440 system. Already the software for driver & its patch are loaded for HBA Fibrechannel card, but still the fibrechannel card is showing the status "Unclaimed" . What will be reason for this? How to get the status "Claimed" ?
Pl. help me out.... (4 Replies)
Hi Experts,
Can we use some command from unix to find the available network interface? I did tried
Its listing following, however how can I decide the which vender card is attached
e.g. if its hme , bge or some thing else
Thanks (7 Replies)
Recently we had a problem with a CPU card on our SunFire V880 which has Solaris 9 OS. we removed the card and there was also a problem with our usr which was accidentally deleted. We able to restore the usr but now we having a problem with our tape drive.
Previously we could write to the with
... (5 Replies)
Hi Guy.
I have a Dummy question.
I cant connect a T2000 machine to the network, We have netword card problems. But in this moment is mandatory to get the explorer from the machine. My question is What can I do?.
Could I try write the explorer to the CD? (This is a option), or any... (6 Replies)
Can any one please help I am trying to sort each item in every line and count the common (non case sensitive) and at the end printing all the unique alphabetically.
Here is what i did ... I can print all the lines but struck to sort each line some were:
I am getting the output as:
I... (5 Replies)
I have system which is using a lot of bandwidth and this is not a big problem,
but how do you troubleshoot this issue?
How can I find out which connections are made for one interface card,
there are about 5 on this system and I can see how much traffic is going through one interface, but I need... (5 Replies)
we have red hat 6 linux box
There are two lan card
one lan card eth0 have ip 10.82.190.31/24 GW 10.82.190.254
2th lan card eth1 have ip 10.82.188.33/24 GW 10.82.188.254
I have below route ... I use two route table
root@xxx# netstat -rn
Kernel IP routing table
Destination Gateway ... (5 Replies)