playwav(1) [debian man page]

PLAYWAV(1)						    Voicetronix Telephony Tools 						PLAYWAV(1)

NAME

       playwav - Play an audio file to a Voicetronix hardware port

SYNOPSIS

       playwav [options] file

DESCRIPTION

       The playwav utility sends audio data from a wav file to a port.

OPTIONS

       The following options are available:

       --card number
	      Explicitly select the card to test.  Default is card 0.

       --port number
	      Explicitly select the port to test. Default is port 0 of the specified card.

       --playgain db
	      Set the playback gain.

       --recgain db
	      Set the recording gain.  Only useful with the --rec option.

       --dial digits
	      Dial the given digits during playback.

       --ring Wait for the line to ring before playing.  Only useful for FXO ports.

       --rec outfile
	      Record the incoming signal while playing.  Useful for cut-through testing.

       --loop Enable tx->rx loopback.  Useful for echo testing, but not supported for all hardware types.

       --hostecho
	      Enable the host based echo canceller.

SEE ALSO

       recwav(1)

AUTHOR

       Ron Lee, David Rowe, Voicetronix <support@voicetronix.com.au>

       This manual page was written by Ron <ron@debian.org>, for the Debian project (but may be used by others).

VPB driver package						    Feb 4, 2007 							PLAYWAV(1)

TONEGEN(1)						    Voicetronix Telephony Tools 						TONEGEN(1)

NAME

       tonegen - Test the Voicetronix programmable tone generator

SYNOPSIS

       tonegen [options]

DESCRIPTION

       The tonegen utility uses the programmable tone generator to send tones to some port.

OPTIONS

       The following options are available:

       --card number
	      Explicitly select the card to test.  Default is card 0.

       --port number
	      Explicitly select the port to test. Default is port 0 of the card being tested.

       --toneid num
	      Play  a  locale  specific  predefined  tone,  where 0 <= num < VPB_TONE_ID_MAX.  The locale is decided according to the value of the
	      VPB_COUNTRY environment variable.

       --tone n freq mag
	      Set a single component for a user defined tone.  This option may be used more than once with different values of n to set the compo-
	      nents of a multi-frequency tone.	Legal values for the other parameters are 0 < freq <= 4000 (Hz), and -inf < mag < 0.0 (dB).

       --ontime ms
	      The number of milliseconds that a user defined tone should be on for.

       --offtime ms
	      The number of milliseconds that a user defined tone should be off for.

       --dial digits
	      Generates a dial string using the specified dtmf digits.

       --sync Play tones using the synchronous api functions.  The default is to use the async api.

       --loop Loop cadenced tones continuously.  Has no effect if a continuous tone has been specified.

       --recgain db
	      Set software record gain in dB.  Default is 0.0

       --rec file
	      Record audio to a file while playing.

       --contest
	      Do  not  wait  for a tone to complete before starting the next one.  This can be useful for stress testing the coherency of the tone
	      generator.

       --help, -?
	      Show summary of these options.

AUTHOR

       Ron Lee, Voicetronix <support@voicetronix.com.au>

       This manual page was written by Ron <ron@debian.org>, for the Debian project (but may be used by others).

VPB driver package						   Feb 18, 2007 							TONEGEN(1)