RINGSTAT(1) Voicetronix Telephony Tools RINGSTAT(1)NAME
ringstat - Perform a simple test of FXS (station) port ring and audio paths.
SYNOPSIS
ringstat [options]
DESCRIPTION
The ringstat utility performs a simple test of FXS port ring circuits. It exercises the card base functions including the audio path, ring
and hook detection. The ports will ring while on hook, play 10 seconds of dial tone if taken off hook, then ring again when they go back
on hook.
Press any key (on the keyboard) to end this test.
OPTIONS
The following options are available:
--help, -?
Show summary of options.
--card number
Explicitly select the card to test. Default is card 0.
--module number
Explicitly select the module of a card to test. Default assumes 8 ports on the card to test. Valid values here are presently 0 or
1. It also assumes all modules have 4 ports. This option may change in the future.
SEE ALSO vpbecho(1), measerl(1)AUTHOR
Ron Lee, Peter Wintulich, David Rowe, Voicetronix <support@voicetronix.com.au>
This manual page was written by Ron <ron@debian.org>, for the Debian project (but may be used by others).
VPB driver package Jan 4, 2007 RINGSTAT(1)
Check Out this Related Man Page
TONEGEN(1) Voicetronix Telephony Tools TONEGEN(1)NAME
tonegen - Test the Voicetronix programmable tone generator
SYNOPSIS
tonegen [options]
DESCRIPTION
The tonegen utility uses the programmable tone generator to send tones to some port.
OPTIONS
The following options are available:
--card number
Explicitly select the card to test. Default is card 0.
--port number
Explicitly select the port to test. Default is port 0 of the card being tested.
--toneid num
Play a locale specific predefined tone, where 0 <= num < VPB_TONE_ID_MAX. The locale is decided according to the value of the
VPB_COUNTRY environment variable.
--tone n freq mag
Set a single component for a user defined tone. This option may be used more than once with different values of n to set the compo-
nents of a multi-frequency tone. Legal values for the other parameters are 0 < freq <= 4000 (Hz), and -inf < mag < 0.0 (dB).
--ontime ms
The number of milliseconds that a user defined tone should be on for.
--offtime ms
The number of milliseconds that a user defined tone should be off for.
--dial digits
Generates a dial string using the specified dtmf digits.
--sync Play tones using the synchronous api functions. The default is to use the async api.
--loop Loop cadenced tones continuously. Has no effect if a continuous tone has been specified.
--recgain db
Set software record gain in dB. Default is 0.0
--rec file
Record audio to a file while playing.
--contest
Do not wait for a tone to complete before starting the next one. This can be useful for stress testing the coherency of the tone
generator.
--help, -?
Show summary of these options.
AUTHOR
Ron Lee, Voicetronix <support@voicetronix.com.au>
This manual page was written by Ron <ron@debian.org>, for the Debian project (but may be used by others).
VPB driver package Feb 18, 2007 TONEGEN(1)
Hi,
I'm running HPUX 11.0 on a machine with two Nic's. Everytime I install UNIX I select the card I want as the primary but it doesn't show up. When I do a ioscan it shows both cards but the card I want is listed as UNCLAIMED UNKNOWN how can I change this?
Magnus (2 Replies)
I am trying to cp files that have F0 as prefix in their name in path p1/p2 to path p3/p4
this command does not work - Why? (I am using HP/UX)
cp p1/p2/F0* p3/p4
thanks. (2 Replies)
Hi , I came across a SUN server whereby it was installed with additional ethernet card. By right in any configuration, you would probably see the onboard ports Net0,Net1 and so on should correspond to e1000g0,e1000g1...
But instead the ext PCI takes precedence in the order and the Net0 becomes... (3 Replies)
I have a string:
hgLogOutput=" +0000 files: forum/web/hook-test.txt /forum/web/hook-test-2.txt description: test"
and I want to extract the file names from it, they will always appear between the files: and the description:. I have worked out that I can do this:
"$hgLogOutput" | awk '{... (2 Replies)
Greetings Forumers!!
I was given a T2000 with one, dual port, HBA card. The card had one fiber connection to the SAN and the former admin enabled MPxIO.
Yesterday, I learned that the other port was connected to the same SAN. This system is in another city so I don't have physical access to... (1 Reply)
Hello all,
I have an A1000 connected to a Sun-Fire-V440(solaris10) through server's HVD scsi card. The card has 2 scsi ports on it and 1 of the ports was initially connected to A1000. And, this A1000 is terminated using a terminator. (c4t5d0)
Now, I want to connect another A1000 storage to... (1 Reply)
hello everyone,
could somebody tell me where can i find some good exercises on signals,processes and threads? actually i need to find some solved exercises in system programming.
tnx (4 Replies)
i have two question am running redhat 5.4
1-how can i know module name for my network card and fiber card
2-how to scan for lun assign to my linux server. (2 Replies)
Hi,
I am using Red Hat 9.0 and it does not have the inbuilt driver module for my onboard lan card (RTL 8169). I downloaded the module (file - r8169-6.017.00.tar.bz2 and even r8169-6.015.00.tar.bz2), but when try to install it it says r8169.h , r8169_n.c , Makefile etc are... (2 Replies)
what does this mean ?
this is the output of this command
i have 2 cards with 2 ports or one card with 4 ports and what does this "NOT CONNECTED" mean ?
/devices/pci@0/pci@0/pci@8/pci@0/pci@9/SUNW,qlc@0/fp@0,0:devctl NOT CONNECTED... (2 Replies)
Hello,
I have Solaris 10 running on one of rack server with dual port FC card. Each port of FC card is connected to two switches respectively. I have been trying to test multipathing functionality with one of FC Storage.
While I have two storage controllers , each connected to the two switches... (2 Replies)
Hi,
I not familiar with MPIO pathing those stuffs!
Can any one please tell me ONE FC card can hold how many paths?
I have a stand alone server, where TWO fc card has been configured,
In one card i am getting ie., fsci0 im getting 4paths
Another card i am getting ie., fsci2 im gettin... (4 Replies)
Dear all,
I have a remote CentOS7 server that has two network cards. Each card has four ports and port one of card one was defined with the IP address assigned to the server. So far, so good and it's been working for over a year. We have now got cables sorted out so there are four paths... (4 Replies)