devinfo(1M) System Administration Commands devinfo(1M)NAME
devinfo - print device specific information
SYNOPSIS
/usr/sbin/devinfo -i device
/usr/sbin/devinfo -p device
DESCRIPTION
The devinfo command is used to print device specific information about disk devices on standard out. The command can only be used by the
superuser.
OPTIONS -i Prints the following device information:
o Device name
o Software version (not supported and prints as 0)
o Drive id number (not supported and prints as 0)
o Device blocks per cylinder
o Device bytes per block
o Number of device partitions with a block size greater than zero
-p Prints the following device partition information:
o Device name
o Device major and minor numbers (in hexadecimal)
o Partition start block
o Number of blocks allocated to the partition
o Partition flag
o Partition tag
This command is used by various other commands to obtain device specific information for the making of file systems and determining parti-
tion information. If the device cannot be opened, an error message is reported.
OPERANDS
device Device name.
EXIT STATUS
0 Successful operation.
2 Operation failed.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO prtvtoc(1M), attributes(5)SunOS 5.10 8 May 1997 devinfo(1M)
Check Out this Related Man Page
devinfo(1M) System Administration Commands devinfo(1M)NAME
devinfo - print device specific information
SYNOPSIS
/usr/sbin/devinfo -i device
/usr/sbin/devinfo -p device
DESCRIPTION
The devinfo command is used to print device specific information about disk devices on standard out. The command can only be used by the
superuser.
OPTIONS -i Prints the following device information:
o Device name
o Software version (not supported and prints as 0)
o Drive id number (not supported and prints as 0)
o Device blocks per cylinder
o Device bytes per block
o Number of device partitions with a block size greater than zero
-p Prints the following device partition information:
o Device name
o Device major and minor numbers (in hexadecimal)
o Partition start block
o Number of blocks allocated to the partition
o Partition flag
o Partition tag
This command is used by various other commands to obtain device specific information for the making of file systems and determining parti-
tion information. If the device cannot be opened, an error message is reported.
OPERANDS
device Device name.
EXIT STATUS
0 Successful operation.
2 Operation failed.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO prtvtoc(1M), attributes(5)SunOS 5.10 8 May 1997 devinfo(1M)
I have been told to look after a server running Sol9 with the following structure:
c1t0d0s0 65G /
c1t2d0s7 67G /usr
c1t4d0s6 24G /var
c1t3t0s7 67G /home
c1t4d0s7 14G /opt
c1t4d0s5 29G /tmp
This server is used to hold tool installations and as a license... (7 Replies)
good morning
I want to add a new emc disk in a vg (it is not a big volume group)
but when i do it, i have the message:
0516-1162 /usr/sbin/extendvg: Warning, The Physical Partition Size of 64 requires the creation of 3200 partitions for hdiskpower48. The limitation for volume vg01 is 3048... (5 Replies)
Hiya people..
I was hoping some expert here would share with me some details as I like to make a "System Recovery Partition" on a external drive. I use my MacBookPro on the road all the time and in the past it's known to happen, and often it happens at the worst time.
So, my question is: ... (0 Replies)
Hi one & All ,
My Need is to Create 64 Partition and create File System in Linux.
I have the Script ...
for((a=0;a<=63;a++))
do
fdisk /dev/cciss/c0d$a
done
for((a=0;a<=63;a++))
do
mkfs.ext2 /dec/cciss/'c0d'$a'p1'
done
the moment I run the Script I get the Prompt ...
Command... (1 Reply)
Greetings,
I have a oracle database server and i keep getting grid control message
Metric=Disk Device Busy (%)
Metric Value=98.66
Disk Device=ssd430
Severity=Critical
Message=Disk Device ssd430 is 98.66% busy.
so I am trying to correlate the ssd430 to the filesystem. I understand this... (3 Replies)
Hi people,
I have on problem when execute the command METASTAT...
d60: Soft Partition
Device: d10
State: Errored
Size: 12582912 blocks (6.0 GB)
Someone help me?
Thank you very much (4 Replies)
Hello everybody! I have IBM System Storage TS3200 Tape and I want to use it with Tivoli version 5.3 .. but during the Device Configuration withard Tivoli cant find TS3200 Device.. Hereis my question: is TS3200 supported for tivoli 5.3 ???? thank you very much (1 Reply)
Our system is not booting up properly. It keeps going to this screen:
Enter Run Level (0-6, s or S):
I tried to hit all nos# 0-6 is just goes to hung state.
Tried s or S & it brings me to single user mode. I've checked the file systems & found out that all three had 98%. I tried to... (86 Replies)
Hello,
what is the meaning of:
lparstat -i
Node Name : ****
Partition Name : ****
Partition Number : 1
Type : Shared-SMT
Mode : Capped
Entitled Capacity : 2.00
Partition Group-ID : 32769
Shared Pool ID : 0
Online Virtual CPUs : 4
Maximum Virtual CPUs : 4
Minimum Virtual CPUs :... (5 Replies)
Hi guys can someone please advise... are there 2 types of VM used in HP-UX? because i have seen 2 sets of commands the one uses hpvm* (hpvmstatus) then the other it starts with v* (vparstatus) (2 Replies)