Smokeping_probes_NFSping(3) SmokePing Smokeping_probes_NFSping(3)
NAME
Smokeping::probes::NFSping - NFSping Probe for SmokePing
SYNOPSIS
*** Probes ***
+NFSping
binary = /usr/local/bin/nfsping # mandatory
blazemode = true
hostinterval = 1.5
mininterval = 0.001
offset = 50%
pings = 20
step = 300
timeout = 1.5
# [...]
*** Targets ***
probe = NFSping # if this should be the default probe
# [...]
+ mytarget
# probe = NFSping # if the default probe is something else
host = my.host
DESCRIPTION
Integrates NFSping as a probe into smokeping. The variable binary must point to your copy of the NFSping program.
NFSping can be downloaded from:
<https://github.com/mprovost/NFSping>
In blazemode, NFSping sends one more ping than requested, and discards the first RTT value returned as it's likely to be an outlier.
VARIABLES
Supported probe-specific variables:
binary
The location of your nfsping binary.
Example value: /usr/local/bin/nfsping
This setting is mandatory.
blazemode
Send an extra ping and then discard the first answer since the first is bound to be an outlier.
Example value: true
hostinterval
The nfsping "-p" parameter, but in (possibly fractional) seconds rather than milliseconds, for consistency with other Smokeping probes.
This parameter sets the time that nfsping waits between successive packets to an individual target.
Example value: 1.5
mininterval
The nfsping "-i" parameter, but in (probably fractional) seconds rather than milliseconds, for consistency with other Smokeping probes.
This is the interval between pings to successive targets.
Example value: 0.001
Default value: 0.01
offset
If you run many probes concurrently you may want to prevent them from hitting your network all at the same time. Using the probe-
specific offset parameter you can change the point in time when each probe will be run. Offset is specified in % of total interval, or
alternatively as 'random', and the offset from the 'General' section is used if nothing is specified here. Note that this does NOT
influence the rrds itself, it is just a matter of when data acqusition is initiated. (This variable is only applicable if the variable
'concurrentprobes' is set in the 'General' section.)
Example value: 50%
pings
How many pings should be sent to each target, if different from the global value specified in the Database section. Note that the
number of pings in the RRD files is fixed when they are originally generated, and if you change this parameter afterwards, you'll have
to delete the old RRD files or somehow convert them.
Example value: 20
step
Duration of the base interval that this probe should use, if different from the one specified in the 'Database' section. Note that the
step in the RRD files is fixed when they are originally generated, and if you change the step parameter afterwards, you'll have to
delete the old RRD files or somehow convert them. (This variable is only applicable if the variable 'concurrentprobes' is set in the
'General' section.)
Example value: 300
timeout
The nfsping "-t" parameter, but in (possibly fractional) seconds rather than milliseconds, for consistency with other Smokeping probes.
Example value: 1.5
AUTHORS
Tobias Oetiker <tobi@oetiker.ch> Matt Provost <mprovost@termcap.net>
2.6.8 2013-03-17 Smokeping_probes_NFSping(3)