Login or Register to Ask a Question and Join Our Community

Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

config::model::models::lcdd::mtxorb(3pm) [debian man page]

Config::Model::models::LCDd::MtxOrb(3pm)		User Contributed Perl Documentation		  Config::Model::models::LCDd::MtxOrb(3pm)

NAME

       Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb

VERSION

       version 2.021

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Size
       Set the display size Optional. Type uniline. upstream_default: '20x4'.

   Type
       Set the display type Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'. upstream_default: 'lcd'.

   Contrast
       Set the initial contrast NOTE: The driver will ignore this if the display
	     is a vfd or vkd as they don't have this feature. Optional. Type uniline. upstream_default: '480'.

   hasAdjustableBacklight
       Some old displays do not have an adjustable backlight but only can switch the backlight on/off. If you experience randomly appearing block
       characters, try setting this to false. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'yes'.

   Brightness
       Set the initial brightness Optional. Type integer. upstream_default: '1000'.

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
       integer. upstream_default: '0'.

   Speed
       Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200'. upstream_default: '19200'.

   KeyMap_A
       The following table translates from MtxOrb key letters to logical key names.  By default no keys are mapped, meaning the keypad is not used
       at all.Optional. Type uniline. default: 'Left'.

   KeyMap_B
       Optional. Type uniline. default: 'Right'.

   KeyMap_C
       Optional. Type uniline. default: 'Up'.

   KeyMap_D
       Optional. Type uniline. default: 'Down'.

   KeyMap_E
       Optional. Type uniline. default: 'Enter'.

   KeyMap_F
       Optional. Type uniline. default: 'Escape'.

   keypad_test_mode
       See the [menu] section for an explanation of the key mappings You can find out which key of your display sends which character by setting
       keypad_test_mode to yes and running LCDd. LCDd will output all characters it receives.  Afterwards you can modify the settings above and
       set keypad_set_mode to no again.Optional. Type uniline. default: 'no'.

SEE ALSO

       o   cme

perl v5.14.2							    2012-11-09				  Config::Model::models::LCDd::MtxOrb(3pm)

Check Out this Related Man Page

Config::Model::models::LCDd::CFontzPacket(3pm)		User Contributed Perl Documentation	    Config::Model::models::LCDd::CFontzPacket(3pm)

NAME

       Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

VERSION

       version 2.021

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Model
       Select the LCD model Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'.

   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Contrast
       Set the initial contrast Optional. Type integer. upstream_default: '560'.

   Brightness
       Set the initial brightness Optional. Type integer. upstream_default: '1000'.

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
       integer. upstream_default: '0'.

   Reboot
       Reinitialize the LCD's BIOS on driver start. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

   USB
       Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled. Optional. Type enum. choice: 'yes',
       'no'. upstream_default: 'no'.

   OldFirmware
       Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command(31). For those devices it may be
       necessary to enable this flag. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

   Size
       Override the LCD size known for the selected model. Usually setting this value should not be necessary.Optional. Type uniline. default:
       '20x4'.

   Speed
       Override the default communication speed known for the selected model.  Default value depends on model Optional. Type enum. choice:
       '19200', '115200'.

SEE ALSO

       o   cme

perl v5.14.2							    2012-11-09			    Config::Model::models::LCDd::CFontzPacket(3pm)
Man Page