CUAL(6) Games Manual CUAL(6)
NAME
Cual - Cuyo Animation Language
Cual is the main language used to describe the animations in cuyo. Strictly speaking it's the stuff between the << >> brackets in the
level description files (xxx.ld).
On the other hand this man page aims at being a complete description of how to write levels for cuyo. But it's still under construction.
See the file "example.ld" to get an idea of how the rest of the level description works. There's also a bit of example Cual code in "exam-
ple.ld". And of course, all the existing levels are examples.
Note that Cual is probably still very buggy. So if strange things happen and you're sure it's not your fault, tell me (cuyo@karimmi.de).
HOW IT WORKS
The level description is organized in sections. There is a global section and every level has its own section, which is a subsection of
the global section. It is common practice to place each level in a separate file, which then basically starts by opening its section and
ends by closing it.
A section is defined by name = {contents}. name is the name of the new section and contents contains the definitions that pertain to that
section. This is a sequence of definitions of the form name = stuff. Here stuff can be {contents} as above, or it can be a single datum,
or it can be a comma-separated list of data. Inside such a list, datum * number can be used as a shorthand for datum, ..., datum, i.e. a
number-fold repetition of datum. A datum can be an identifier, a string (enclosed by '"'), a word, or a number. In place of a number
<expression> can be used, where expression is an arbitrary expression made up from literal numbers, previously defined numeric data, and
the operators +, -, *, / and %.
Definitions can also depend on versions. See section VERSIONING below.
Apart from definitions, a section can also contain cual definitions (see below). These have to be enclosed in << and >>.
Each blob has its own (main) Cual procedure which does the drawing and the animation stuff. The procedure only depends on the kind of the
blob, that is, it is the same for blobs of the same kind. However each blob has its own instance of the variables.
In every game step, the procedure of each of the blobs is called once. (There are 12.5 game steps per second.) It has to draw the blob
each time, even if nothing has changed. (However, there's an internal routine in cuyo which checks if the same is drawn as in the last
step and which then supresses the drawing.)
There may be other procedures associated to a kind of blob, which are executed at special events, for example when a falling blob lands.
In contrast to the main procedure, these event handlers are not allowed to draw anything. See section EVENT HANDLERS for a list of the
existing events.
The name of the main procedure of a blob (the one which draws the blob) is the name of the kind of the blob. Normally, that name is the
word listed after pics= entry in the .ld file; but if that "word" contains a dot, only the part before the dot makes up the name. (E. g.
with pics=redblob.xpm,greenblob.xpm, the names are "redblob" and "greenblob".)
The name of an event handler procedure is the name of the kind, followed by a dot, followed by the event name. (E.g. "redblob.land" for
the landing event of the redblob from above.)
[Explain the default procedures.]
LEVEL DATA
String valued data
name The name of the level. This appears in the list of levels as well as in the level intro.
description
This is an optional further description of the level in its intro.
author The name of the level author(s) for credit at the beginning of a level.
Identifier valued data
bgpic Background picture (file name). If too small, placed at bottom. Defaults to none.
toppic Appearance of the top border coming down (file name). Defaults to none.
explosionpic
Appearance of the explosions (file name). Has a default.
Number valued data
numexplode
The size that a group of blobs has to reach in order to explode. This is only the level-wide default. Each kind can override this.
Whether the group does explode is also controlled by behaviour. See section VARIABLES AND CONSTANTS for details.
toptime
Time the border takes to come down, in number of game steps. Each game step lasts 80ms. The default value is 50 (i.e. one pixel
every four seconds).
topoverlap
Placement of toppic relative to the actual border. More precisely, number of pixels the lower border of the picture is below the
actual border. Defaults to the height of the picture.
topstop
When the border comes down at the end of the level, number of pixels it should stop before the bottom. Set this to the same value
as topoverlap if you want your toppic to be comletely visible at the end. Defaults to 0.
chaingrass
Must be 0 or 1. If set to 1, chain reactions are necessary to kill the grass. Defaults to 0. More precisely, chaingrass only con-
trols the default for behaviour for grass blobs. See section VARIABLES AND CONSTANTS for details.
mirror Must be 0 or 1. If set to 1, the level appears upside-down. Defaults to 0.
randomfallpos
Must be 0 or 1. If set to 1, the initial fall position is randomized horizontally. Defaults to 0.
neighbours
Determines in which directions the blobs can connect to each other in order to form groups. This is only the level-wide default.
Each kind can override this. See section VARIABLES AND CONSTANTS for values. Defaults to neighbours_rect.
randomgreys
The expected time between two randomly appearing greys in game steps(80ms). Use -1 for none at all, which is the default.
nogreyprob
The probability that a grey does not appear. See greyprob and colourprob in section KIND DATA for details. The default is 0.
aiu_color, aiu_grass, aiu_grey, aiu_two_above, aiu_monochromic_vertical, aiu_height
Parameters for the AI player's utility function. Default respectively to <10*(number of kinds)>, 20, 10, <aiu_color/2>,
<aiu_color>, and 10. See section THE AI UTILITY FUNCTION for details.
Colour valued data
(A colour is an RGB triple of numbers between 0 and 255.)
bgcolor
The background colour. Defaults to white.
textcolor
Colour of any text. This includes the beginning-of-level information, message()s, and score. Defaults to a certain shade of dark
grey.
topcolor
The colour of the top border comming down (where not determined by toppic). Defaults to a certain shade of light grey.
Other data
startdist
Distribution of blobs at the beginning of the level. It is a list of strings, the format of which is described in the section
STARTDIST.
pics, greypic, startpic, emptypic
Lists of kinds. These can be either file names referring to the picture to be used, or declarations of kinds that have to be
defined later on. The different keywords (e.g. pics, emptypic) define different defaults. In fact, only the first three may be
real lists, emptypic is limited to exactly one entry. In these lists, it is advisable to use * whenever possible. Besides being
shorter to write, it also speeds up loading of the level and cuts down memory usage. This is because cuyo does some initializations
only once for each entry with multiplier.
The intentions of these lists are normal blob kinds resp. grey blob kind resp. grass blob kind resp. nothing-blob. However, the
only differences between pics, greypic and startpic are the default values for behaviour, colourprob, goalprob, greyprob, versions
and distkey (see there). All of these can also be overridden individually. Also, the default drawing code is different. (The
default drawing code for startpic does not draw connections.)
kind Each kind can have its own section. See KIND DATA below for the entries of that section.
KIND DATA
numexplode, neighbours
Defining these data in the section of a kind overrides the level-wide value for the kind. See section LEVEL DATA for a description
of these data.
pics A list of file names of pictures to be used for this kind. The nth entry can later be accessed in cual with file=n-1.
colourprob
The probability that this kind appears as one of the two steered falling blobs. More precisely, this is a nonnegative integer
weight. For determining the actual probability, the value is divided by the sum of the colourprobs of all kinds. This sum must be
positive. The default is 1 for kinds declared with pics= and 0 for all other kinds. The probability is also used for + in start-
dist. For more details see section STARTDIST.
goalprob
This affects the semantics of * in startdist in the same way, as colourprob does for +. The default is 1 for kinds declared with
startpic= and 0 for all other kinds.
greyprob
The probability that this kind appears as a grey blob. This is similar to colourprob, but there is a difference: For greyprob,
nogreyprob is included in the sum, so that it might happen that no blob appears at all. There is a notable difference between a
positive nogreyprob and a positive greyprob in kind nothing, when several lines of grey blobs appear: In the latter case, empty
blobs appear in the wall of greys, making holes. In the former case, the wall is made less high. Usually this is preferable. The
default is 1 for kinds declared with greypic= and 0 for all other kinds. The value also affects the semantics of - in startdist.
In this case, nogreyprob is not included in the sum.
versions
At the creation of a blob, its version variable is initialized. Usually, it is chosen at random from 0 to versions-1, but startdist
provides the possibility to specify it exactly. See section STARTDIST for details. The default is 52 for kinds declared with
startpic and 1 for all other kinds.
distkey
An alphanumerical key, which is used in startdist to identify this kind of blob. The default is A for kinds declared with startpic
and undefined for all other kinds. See section STARTDIST for details.
CUAL DEFINITIONS
Inside << >>, variable and procedure definitions are expected.
procname = code ;
Defines a "procedure". The next section describes how code looks like. Example:
redblob = {
schema16; 0*;
1; A,B,C; *;
};
var varname1 [= def1 [: reapply]], varname2 [= def2 [: reapply]], ... ;
Defines variables with default values. If no default is specified, zero is used. See section VARIABLES AND CONSTANTS about the
meaning of the default value and the optional suffix : reapply.
default varname1 = def1 [: reapply], varname2 = def2 [: reapply], ... ;
Changes the default for already defined variables. Again, the suffix : reapply is optional. This is useful to give to a single
kind a different default for a variable than to the other kinds. Also, the default of a system variable can be changed this way.
CODE
A code fragment can be one of the following:
{ code; code; ...}
Executes one command after the other.
code, code, ...
This is useful for simple animations. Executes exactly one of the commands: In the n-th call, the n-th command is executed. After
the last command, the first one is executed again. However, if one of the commands is "busy" (see section BUSIENESS), this one will
be executed until it stops being busy, and only after that, the next command will be executed.
procname
Executes the procedure procname, which has to be already defined. The result is the same as if the code from procname would have
been inserted in that place.
&procname
Executes the procedure procname; however, every instance of such a procname is the same. This concerns busieness and the state of
an animation sequence. (See sections BUSIENESS and AMPERSAND-CALL.)
busy Does nothing except being busy. (See section BUSIENESS.)
varname = expr
Sets the variable. See section VARIABLES AND CONSTANTS for details.
The same with +=, -=, *=, /=, %=, .+=, .-=.
Does what you would expect.
[ varname = expr ] code
Sets the variable varname to expr, executes code and then resets the variable to the old value.
number A shortcut for file = number.
letter A shortcut for pos = number, where different letters mean different numbers: A: 0, B: 1, ..., Z: 25, a: 26, ..., z: 51
* Draw the icon specified by the variables kind, file and pos. May also draw only a part of the icon, if specified by the variable qu
(see section VARIABLES AND CONSTANTS).
*@(position)
Like *, but draws the icon at some other position. This drawing is performed after all drawing by *. If *@ is used from several
blobs, the further order of drawing is not specified. It is guaranteed, however, that at any given time this order is the same for
all positions. (See section VARIABLES AND CONSTANTS for more details about @.)
@(position)*
Like *, but draws the icon at some other position. This drawing is performed before all drawing by *. If @* is used from several
blobs, the further order of drawing is not specified. It is guaranteed, however, that at any given time this order is the same for
all positions. (See section VARIABLES AND CONSTANTS for more details about @.)
if expr if-arrow if-code ;
if expr if-arrow if-code else [else-arrow] else-code ;
The arrows can be either "->" or "=>". If you use "->" arrows, it does exactly what you would expect. If the if-arrow is "=>",
then once the expression gets true, the if-code will be executed every subsequent time (without testing the condition), as long as
it is "busy". For more details see section BUSIENESS. If the else-arrow is "=>", then once the expression gets false, the else-
code will be executed every subsequent time as long as it is busy. The else-arrow may only be omitted, if the if-arrow is "->".
Then the else-arrow also is "->". (But this might change in the future.)
switch {
expr1 arrow1 code1 ;
expr2 arrow2 code2 ;
...
} The arrows can be either "->" or "=>". Does the same as:
if expr1 arrow1 code1
else => if expr2 arrow2 code2
...
The last expr may be omitted. This is equivalent to setting it to true.
bonus(expr)
The player gets expr bonus points.
message(String)
The string is displayed (blinking) on the screen. To be used together with bonus(...). Example:
bonus(50);
message("You get 50 bonus points");
explode
Makes the blob explode. For the next 8 steps or so, the blob is still what it was before, but the explosion is drawn over the
graphics. After that, it's changed to a nothing-blob.
lose The players immediately lose the level.
sound(Filename)
Plays the given sound file.
You can also omit the code completely. Then, of course, it does not do anything. This can be useful as part of ,-sequences.
There's a shortcut for drawing: You may omit the ";" between a number, a letter and the "*".
EXPRESSIONS
The only data type in cual is int. Bools are represented by 0 and 1, like in C. (And any number other than 0 is interpreted as true, if a
boolean is expected.)
Of course, variables, constants and numbers are expressions, and you can use parentheses. There are the following operators (listed here
in order of increasing precedence):
|| Boolean or
&& Boolean and
==, !=, <, >, <=, >=
Comparison
==.. A special comparison
! Boolean not
+, - Add, substract
: Special operator
*, /, %
Multiply, divide, modulo
&, |, .+, .-
Bitwise and, bitwise or, setting of bits (same as bitwise or), unsetting of bits
- Unary minus
. Testing of bits (a.b is the same as a&b != 0)
/ and % work mathematically correct and do not make funny changes when the sign of the numerator changes. More specifically, if b is posi-
tive, then a/b is the largest integer n such that n*b<=a. If b is negative, then a/b is the largest integer n such that n*b>=a. In both
cases a%b is such that (a/b)*b+a%b = a. Examples:
13/5=2 13%5=3
-13/5=-3 -13%5=2
13/-5=-3 13%-5=-2
-13/-5=2 -13%-5=-3
The following are the special operators:
expr1 == expr2 .. expr3
Is true, if expr1 lies between expr2 and expr3. You may also omit one of expr2 and expr3. (Then, it does the same as <= resp. >=.)
The precedence implies that x==y==2..3 is the same as x==(y==2..3) and is neither (x==y)==2..3 nor x==(y==2)..3. Note that this
operator might change in the future. (I plan to make something like "expr in set" in Pascal.)
expr1 : expr2
Is true (that is, 1) with probability expr1/expr2
neighbour_pattern
neighbour_pattern is a sequence of six or eight characters 0, 1 and ?. It is true if the sequence fits to the neighbour sequence of
the blob. The neighbour sequence is a string of "0"s and "1"s with a "1" for each neighbour of the same kind, starting above and
going clockwise. This way, you get a string of "0"s and "1"s (six or eight, depending on wether this level is in hex mode).
Example: 1???0??? is true iff the blob above this blob is of the same kind and the blob below it is of different kind.
For an empty blob the semantics is slightly different: If in some direction there is no neighbour, because the field ends there, the
entry in the neighbour sequence is 1 nevertheless. So for an empty blob 1???0??? is true, iff the blob above this blob does not
exist or is empty as well, and the blob below this blob exists and is not empty.
If some blob changes its kind during a step, the expression will still test the neighbours as they were at the beginning of the
step. (See the section VARIABLES AND CONSTANTS for details.)
The following functions exist:
rnd(expr)
Returns a random value between 0 and expr-1
gcd(expr1, expr2)
Returns the greatest common divisor of expr1 and expr2
VARIABLES AND CONSTANTS
The following kinds of variables and constants exist:
-- User defined variables (see section CUAL DEFINITIONS). At the start of the level (or at the creation of the blob) the value is the
default value you provided. If you supplied the default with : reapply, whenever a blob's kind changes, the value of the variable is
also set to the default of the new kind. There is a subtlety: This only happens if the new value of kind is in fact different from the
old one.
-- System variables. These variables are always defined and have special meanings, e.g. file and pos. Some of them are read-only.
-- User defined constants. These are defined in the main .ld part, not in cual (not inside << >>).
-- System constants. Some of them depend on properties of the level, some are really constant.
Of each variable, there's one instance in each blob. Normally, you access the instance in your own blob, but with the following syntax,
you can access variables of other blops:
varname@@(x, y; side)
varname@@(x; side)
varname@@(; side)
varname@(dx, dy; side)
varname@(dx; side)
varname@()
If x and y are given, these are absolute coordinates in the grid of blops, that is the variable is taken from the blob with loc_x=x and
loc_y=y (see under The system variables). If only x is given, it specifies one of the two blobs that are currently falling. If there is
only one such blob left, because the other one got stuck on some tower, the remaining blob's coordinate is 0. Otherwise one of the two has
coordinate 0, the other 1.
In the @ variants, the coordinates are relative to the current blob. The variant @@(; side) refers to the semiglobal blob, the variant @()
to the global blob (See section THE GLOBAL BLOB). The extra part ; side is optional and specifies the side of the game. This is only
meaningful in two-player mode. side = < specifies the left player, side = > the right player, side = = the player to which the current
blob pertains, and side = ! the other player. @() and @@() can also be given as @ respectively @@.
This can be done for both, reading and writing variables. It also works for system variables (but not for constants).
In hex mode levels, for odd dx, dy should be a "half integer", that is a number ending in ".5". This is the only place in Cual where non-
integers appear. Especially, ".5" is not allowed in composite expressions. Therefore, also integer dy is always allowed. If a half-inte-
ger is expected and an integer is given, it is assumed to be rounded to above, that is 5 then represents 4.5 and -5 represents -5.5.
Caution: With mirror=1 the absolute and the relative coordinates use different coordinate systems. Handle with extreme care.
Accessing foreign variables is not as easy as it might look at first glance; it might easily introduce a dependence of the internal order
of execution of the blob codes. For this reason,
-- reading variables with @ or @@ always returns the value of the variable it had at the beginning of the current step, that is, before any
of the blob codes has been executed.
-- when writing variables with @ or @@, the write operation will only be executed at the end of the current step. (The write operations
are stored in a kind of queue.)
This is also true if a blob accesses its own variables with @(0,0).
The operators +=, -=, etc. are also performed in the future if the left hand side is an @-variable. (To be more precice, the right hand
side is calculated instantanousely.)
For illustration, look at the following six statements:
1) X += 1
2) X@(0, 0) += 1
3) X = X + 1
4) X = X@(0, 0) + 1
5) X@(0, 0) = X + 1
6) X@(0, 0) = X@(0, 0) + 1
Only 1) and 3) do the same; they simply increment X by 1. Statement 4) sets X to one more than it was at the beginning of the step.
Statements 2), 5) and 6) cause the value of X to be changed in the future (after the current step): X is set to one more than:
2) the value of X just before the change (that is, X is incremented in the future),
5) the current value of X,
6) the value of X at the beginning of the step.
Some more details
-- Whenever you try to access a variable at a location which doesn't exist, you will get the default value. If default values depend on
the kind, the default pertaining to the blob executing the code is used. This may change in the future.
-- Changing a variable which doesn't exist does nothing (and does not result in an error).
[Add explanation of time slices; roughly:
@-access of variables in reality don't access the value at the beginning/end of the game step, but of the time slice. The call of the
main procedure of all blobs happens in the same time slice, but each other kind of event has its own time slice.]
The system variables
file Specifies the file number from which to take the icon that is drawn by "*". This variable is reset to 0 before the drawing proce-
dure is executed.
pos Specifies the position in the file of the icon that is drawn by "*". This variable is reset to 0 before the drawing procedure is
executed.
kind The kind of the blob. There are constants for the possible values of this variable. If you change the kind, you should be aware of
three things:
-- Expressions like "001???01" test the neighbour pattern at the beginning of the current step. So the change of the variable kind
will not be reflected.
-- In the current step, the program to draw the blob has already been invoked (it might even be the program which changed this vari-
able); so in this step, the blob will still look like one of the old kind. However, if things are drawn after the kind has been
changed, icons from the new kind are taken.
-- Defaults of the new kind that are declared with : reapply are applied. This happens at the same time that kind changed, but only
if the new kind is different from the old one.
version
Is assigned a hopefully distinctive value at the blob's creation. See versions in section KIND DATA for details.
qu Tells "*" which part of the icon to draw. It's possible to draw the whole icon, or only one of its quarters. If a quarter is
drawn, you may specify independently which of the quarters to take and at which position to draw it. Use the constants (see below).
This variable is reset to "draw all" before the drawing procedure is executed.
out1, out2
Set these Variables for debug output. The values will be printed on top of the blob. These variable are reset to "output nothing"
before the drawing procedure is executed. (In fact, "output nothing" is one special big value.)
inhibit
Set this variable to a sum of the constants DIR_...; this will inhibit that this blob connects into the given directions. This is
not for the graphics but for the calculation of the connected components and the explosions.
behaviour
This is a bit field. Refer to The Constants below for the meaningful of its bits. The default is calculate_size+explodes_on_size
for normal blobs, explodes_on_explosion+explodes_on_chainreaction for grey blobs, floats for the empty blob and goal-
blob+explodes_on_explosion+explodes_on_chainreaction or goalblob+explodes_on_chainreaction (depending on whether chaingrass is set)
for grass blobs.
falling_speed, falling_fast_speed
These variables are only used in the semiglobal blobs. They define the vertical speed of the steered falling blobs. The unit is
pixels per game step. The defaults are 6 and 32.
The system read-only variables
time The number of time steps since the level was started.
turn Is 1 resp. 2 if the blob is falling and just being turned by the user and 0 otherwise. (1 in the first turning step, 2 in the sec-
ond one.) Be aware that if the user presses the turn key fast several times, some of these steps may be omitted. (Use the turn
event if you want to be sure that a program block is executed once for every turn.)
connect
Contains internal data. Will be removed. Probably.
size The size of the component of the blob. (That is, how many blobs are connected.)
basekind
The value of the constant generated for the name of the kind of the blop. Example:
pics = orange, pear, apple * 3, banana, apple
Here, all four kinds apple have the same value for basekind, and this value is apple.
loc_x, loc_y
The absolute coordinates of the blob. (0,0) = top left corner
loc_xx, loc_yy
The absolute coordinates of the blob in pixels. This is not always the same as loc_x*32 and loc_y*32, particularly for the steered
falling blobs.
loc_p The player of the blob (1 or 2)
falling
true, if the blob is falling. (Falling in the sense of steered by the player. Grey blobs are not falling in that sense.)
falling_fast
true, if the blob is falling fast, that is, the user pressed the down key.
players
The number of players.
exploding
When the blob is exploding, the position in the explosion animation (1 to 8); 0 else.
Currently, there is one exception: if the explosion has been triggered by the explode command, then exploding will have value 1 only
after the current game step [more precisely: time slice; fix that]. Reason: when reading exploding@(x,y), we maybe don't know yet
that the other blob calls explode.
The Constants:
Constants for behaviour:
goalblob
Set goalblob if this blob should act like grass: You will have to get rid of it to win the level and making this blob explode will
give more points.
calculate_size
When this bit is set, size will be regularly updated to the sum of weight in the connected component.
explodes_on_size
When this bit is set, a connected component explodes, when it has size>=numexplode.
explodes_on_explosion, explodes_on_chainreaction
When these bits are set, the blob explodes whenever an explosion that was triggered by explodes_on_size happens in its neighbour-
hood. explodes_on_chainreaction refers to those triggering explosions that are the second or later part of a chain reaction.
explodes_on_explosion refers to the other ones.
floats When this bit is set, the blob keeps its vertical position even if there is an empty blob below. This bit has no effect on the
steered falling blobs.
Constants for kind:
<name of kind of blob>
For each kind of blob, there's one constant with the name of that kind. Use it to check if a blob is of that kind using kind@(x,y)
== aKind or to change to that kind using kind = aKind. See kind under The system variables for the side-effects of setting kind.
Sometimes it is necessary to perform arithmetic on kinds, for example when several have been declared using the * multiplier. The
values of the constants are successive in the order, in which the kinds have been declared. When a name is used several times, the
first use defines the value. Example:
startpic = apple, orange
pics = orange, pear, apple * 3, banana
greypic = pineapple
This initializes 2 kinds with the defaults for startpic, 6 kinds with the defaults for pics, and 1 kind with the defaults for
greypic. The value of the constant orange is 1 more than that of apple, pear is 2 more than orange, banana is 4 more than pear and
pineapple is 1 more than banana. We do not specify what these values actually are.
This constant also exists for the empty kind, if one has been declared using emptypic. In this case the value's relation to the
other values is not specified at all.
global, semiglobal
Denote the kind of the global, respectively semiglobal, blob.
nothing
Is the same as the constant for the empty kind. Is provided, because sometimes, you don't have an empty kind, but you still need to
test if a blob is empty.
outside
The value of kind if the coordinates are outside of the game board.
Constants for neighbours:
neighbours_rect
A blob connects up, down, left, and right. This is the default.
neighbours_diagonal
A blob connects diagonally.
neighbours_hex6
When used in the level-wide neighbours, this sets hex mode. A blob connects up, down, left with a slight upwards shift, left with a
slight downwards shift, right with a slight upwards shift, and right with a slight downwards shift.
neighbours_hex4
When used in the level-wide neighbours, this sets hex mode. A blob connects left with a slight upwards shift, left with a slight
downwards shift, right with a slight upwards shift, and right with a slight downwards shift.
neighbours_knight
A blob connects in knight moves (Two forward and then one sideways. Forward is one of up, down, left or right. Sideways is perpen-
dicular to forward. This makes a total of eight directions.).
neighbours_eight
Combines neighbours_rect with neighbours_diagonal.
neighbours_3D
A more obscure mode created especially for 3d.ld. When used in the level-wide neighbours, this sets hex mode. A blob connects up,
down, two (but not one) to the left, and two to the right. In even columns it also connects right with a slight upwards shift. In
odd columns it also connects left with a slight downwards shift.
neighbours_none
A blob does not connect at all.
Constants for qu:
Q_ALL Value for qu, which means "draw the complete picture".
Q_TL, Q_TR, Q_BL, Q_BR
Values for qu. "TL" means draw top-left quarter, etc. (See the "*" command in the Code section.)
Q_SRC_DST
SRC and DST may be TL, TR, BL, BR. Take quarter SRC and draw it at position DST.
Miscellanious constants:
DIR_XX To be used with the variable inhibit to prevent the blob connecting in the given directions. XX can be U, D, L, R (horizontal and
vertical); UL, UR, DL, DR (diagonal); UUL, UUR, DDL, DDR, LLU, LLD, RRU, RRD (knight); F, B(3d)
VERSIONING
Sometimes it is necessary to define a level slightly differently for different purposes. For example you might need to decrease numexplode
for the two-player version lest it becomes unplayable. The difficulty settings from cuyo's main menu provide another example.
This is done by qualifiing a definition with the versions it should apply to. It is best explained by an example:
numexplode = 8
numexplode[2] = 6
numexplode[1,hard] = 10
This specifies that normally numexplode should be 8. In two-player mode it should be 6. In one-player hard mode it should be 10. Here
the specifiers 2 for two-player mode, 1 for one-player mode and hard for hard mode are used. Along with easy for easy mode these are all
predefined specifiers intended for levels. Additionally (and for internal purposes), there are specifiers for the level tracks: main, all,
game, extreme, nofx, weird, and contrib.
Furthermore, you can make up and use your own specifiers. In order for them to take effect, though, you have to give cuyo additional
information about the current version. This is done on the command line using the --version option. For example
cuyo --version=hard,geek
Specifies both hard version (you can change that in the menu) and version "geek", which is not predefined.
There are several constraints to be observed:
-- All versions of a definition must be made before the first use of the thing defined. As sometimes it is not obvious where the defined
thing is used (for example startpic uses a previous greypic by assigning successive numbers to kinds), it is best to group all these
versions into one block.
-- A given version also applies to every more specialized version, for which no definition is given. In the above example, numexplode is
set to 6 in two-player hard mode and in two-player easy mode as well.
All resulting conflicts must be resolved. For example, if you make a definition for [2] and one for [hard], you must also make a defi-
nition for [2,hard] (or, equivalently, for [hard,2]), because otherwise it would be ambiguous which of the two former should apply in
two-player hard mode.
-- Cuyo knows that easy and hard exclude each other. Consequently, it is unnecessary (and indeed prohibited) to give an [easy,hard] defi-
nition, even if both [easy] and [hard] are given. The same holds for 1 and 2, and for level tracks.
-- Furthermore, cuyo knows that 1 and 2 are exhaustive: There is no mode which is neither single-player nor two-player. (The human-versus-
AI mode counts as two-player as far as cual is concerned.) Therefore, if there are definitions for both, it is unnecessary, (and again
illegal) also to define a version without any of both. For example, if [1,de] and [2,de] are given, [de] must be omitted. Alterna-
tively, you could of course give [1,de] and [de] or [de] and [de,2]. The level track specifiers are exhaustive as well.
BUSIENESS
(No, not Business ;-)
Busieness is a concept to make it easier to implement simple animated sequences which are triggered by certain events. Each code fragment
has an internal state which tells if it is busy.
-- Normal statements like assignments are never busy.
-- A chain of commands separated by "," is busy as long as not all of the commands have been executed.
-- code1 ; code2 is busy as long as at least one of code1 and code2 are busy.
Here's an example of how to use busieness for an animation which appears at random intervals:
switch {
1:100 => {B*, C*, D*, E*};
-> A*;
};
This code fragment normally draws the icon at position A(0). But in each step, with a probability of 1/100, an animation sequence con-
sisting of icons B, C, D and E is started. With a normal arrow ("->") after the "1:100", after the step in which B has been drawn, the
probability would be 99/100 that A is drawn again. But with the double arrow, the switch statement won't switch back to A until the anima-
tion has terminated.
(Btw: It doesn't matter if there's a "->" or a "=>" before the "A*"; A* isn't busy anyway.)
THE GLOBAL BLOB
Apart from the normal blobs which you can see on screen, there's one global blob (for the whole game, not one for each player), which,
well, isn't really a blob, but behaves a bit like it. It has its own set of variables, and it can have a program which is run once every
step. To define such a global program, use global=code. However, the global variables do exist even if you don't define global code. See
section VARIABLES AND CONSTANTS on how to access them. Note that the global blob is always executed before any of the normal blobs.
There are also semiglobal blobs. There is one for each player. These are programmed with semiglobal=code.
EVENT HANDLERS
The following events exist:
init Is called only once, when the blob gets into life, just before the first time its main drawing routine is called.
turn Is called for falling blobs each time the user presses the turn key.
land Is called when the steered blob lands.
changeside
Is called when a blob moves from one player to the other, just after the blob has arrived at the new player.
connect
Is called when the connection of blobs is recalculated.
row_up Is called when a player gets a row from the other side. Is only called for the semiglobal blob, though.
row_down
Is called when a player gives a row to the other side. Is only called for the semiglobal blob, though.
keyleft, keyright, keyturn, keyfall
Are called when the player presses the left, right, turn or fall key. Are only called for the steered falling blobs and the
semiglobal blob, though.
THE LIFE OF A BLOB
Normal blobs come into life at the beginning of the game, or they fall into life: either as colored blobs, steered by the user, or as grey
blobs. When a blob moves (by gravitiy or when rows go from one player to another), it takes its variables with it. When a blob explodes,
it does not stop existing. Rather, it transforms into an empty blob. That's important for the variables: The empty blob still has all the
variables set to the values they had before; only its kind is different. Empty blobs are everywhere where there's no other blob. (How-
ever, the falling blobs steered by the user are in some sense "above" everything else; there are empty blobs beneath them.)
The life of empty blobs is different from the one of normal blobs. Empty blobs are not affected by gravity, and they often start or stop
existing. For example, when a single grey blob is falling down, the empty blob below it stops existing when the grey blob arrives and a
new empty blob starts existing when the grey blob moves on. There is only one situation in which empty blobs move: When a row moves from
one player to the other, and everything moves up resp. down, the empty blobs move, too.
STARTDIST
The format of the startdist field is rather complicated. On the plus side, this means that many things can be done with little effort. We
first describe the single-character format, which, at the time of this writing, has sufficed for all needs. After that, we describe the
general format as an extension.
Every line of the startdist describes one row of blobs in the level's initial state. The lines are aligned to the bottom and the topmost
lines come first (normal reading order). Each line must contain exactly 10 or exactly 20 characters. In a line of length 20 the first 10
characters describe the left player, the second 10 characters describe the right player. A line of length 10 describes both players.
Hence, each character describes one blob. The semantics are:
. An empty blop.
+, -, *
A blop chosen at random according to colourprob, respectively greyprob, respectively goalprob. The value of nogreyprob has no
influence.
0..9, A..Z, a..z
These characters denote a specific kind. If the character matches the distkey of some kinds, the first of these is chosen. More
generally, these characters are ordered such that "9" comes before "A" and "Z" comes before "a". In this order, the maximal dis-
tkey, which does not come after the character, specifies the blob's kind. The difference between the character and the distkey then
specifies the blob's version.
Example 1: In the special case, where the character exactly matches a distkey, version is set to 0.
Example 2: Suppose kind apple has distkey = "A", kind orange has distkey = "O" and no further distkeys exist. Then the character
"C" denotes an apple with version=2, the character "N" denotes an apple with version=13, the character "O" denotes an orange with
version=0, the character "S" denotes an orange with version=4, the character "a" denotes an orange with version=12, and the charac-
ter "8" does not denote anything (and hence is illegal).
In this way, startdist can reference 62 kind/version combinations directly (and more at random). Because this might at some time not be
enough, the multichar extension has been introduced. In this case, each blob is described by more than one character. However, the number
of characters per blob must be the same for all keys. Hence, the lengths of startdist lines then must be this number multiplied by 10 or
by 20. Every multicharacter combination starting with ".", "+", "-", or "*" is treated as the corresponding character in single-character
format. All other character combinations are treated as numbers in base 62 representation. Here, "A" to "Z" are digits with decimal value
10 to 35, and "a" to "z" are digits with decimal value 36 to 61. Leading spaces are allowed instead of zeroes (however, the all-space
string is forbidden). The maximal distkey which (as a number) is not larger than the number given in startdist, specifies the blob's kind.
The difference between the startdist number and the distkey then specifies the blob's version. In the case of multichar distkeys, the
default for distkeys of kinds declared by startpic= is 10 in decimal.
For blops whose kinds are chosen at random (i.e. characters "+", "-", "*" in single-character startdists), cuyo tries to make these as dif-
ferent as possible. That means, by a certain heuristic, cuyo minimizes the number of neighbouring blobs of the same kind. "Neighbouring",
of course, refers to the neighbours entry. inhibit and the calculate_size bit of behaviour have no effect (these are mutable during the
lifetime of blobs, while at the time of startdist processing, no blob's lifetime has started yet). So the only way to influence the
unneighbouring (if you really wish to do so), is by setting neighbours appropriately. (Of course, this possibility is even more limited,
when you intend to set the calculate_size bit during the blob's lifetime.)
WHERE DO I PUT THE CUAL CODE
?
Cual procedures and variables can be defined in different sections of the .ld files:
-- Outside of everything; that code is accessible from every level coming after that definition.
-- In the section of a level.
-- In the section of a kind.
This basically does what you expect. However, there's one thing you might want to know: Even if you define a variable inside a kind, every
blob in that level will have that variable. The only effect of defining the variable in the section of a kind is that this kind is the
only one which can access it.
AMPERSAND-CALL
To explain a bit what calling a procecure with an & means, here two examples:
Example 1:
<<
myblob = {
...
switch {
myvar -> { 0A*; 1; A,B,C,D; *; 2A*};
-> { 0B*; 1; A,B,C,D; *; 2B*};
};
};
>>
Example 2:
<<
anim = {1; A,B,C,D; *};
myblob = {
...
switch {
myvar -> { 0A*; &anim; 2A*};
-> { 0B*; &anim; 2B*};
};
};
>>
The difference between these examples is what happens when myvar changes. In example 1, the animation "A, B, C, D" will restart at the
beginning (because the two animations are different ones); in example 2, the "same" animation is used in both cases, so the animation will
simply continue. (Removing the ampersands from example 2 will turn the behaviour to the one of example 1.)
THE AI UTILITY FUNCTION
When deciding how to place the steered falling blobs, the AI player tries to maximize a certain utility function. Its value is the sum of
the values for both steered falling blobs plus aiu_monochromic_vertical in case both blobs have the same color and they get placed verti-
cally. The value for a single blob is the sum of the following:
-- For each new neighbour of blob, the neighbour utility.
-- aiu_two_above, if the blob is two above a blob of same kind.
-- aiu_height*20/(the blob's y coordinate).
The neighbour utility for a single new blob and a single one of its new neighbours is the sum of the following:
-- aiu_color, if the neighbour has the same kind as the blob.
-- aiu_grass, if the neighbour fulfills behaviour.goalblob.
-- aiu_grey, if the neighbour fulfills behaviour.explodes_on_explosion.
SEE ALSO
cuyo(6)
BUGS
Probably a lot. The following are just a few known ones:
There are several problems with busieness and that stuff. There are several situations in which Cual doesn't behave in the way I would
like, and in other situations I don't know how Cual should behave.
2012-1-27 CUAL(6)