ibsysstat(8) [debian man page]

IBSYSSTAT(8)							OpenIB Diagnostics						      IBSYSSTAT(8)

NAME

       ibsysstat - system status on an InfiniBand address

SYNOPSIS

       ibsysstat  [-d(ebug)]  [-e(rr_show)]  [-v(erbose)]  [-G(uid)] [-C ca_name] [-P ca_port] [-s smlid] [-t(imeout) timeout_ms] [-V(ersion)] [-o
       oui] [-S(erver)] [-h(elp)] <dest lid | guid> [<op>]

DESCRIPTION

       ibsysstat uses vendor mads to validate connectivity between IB nodes and obtain other information about the IB node. ibsysstat  is  run	as
       client/server. Default is to run as client.

OPTIONS

       Current supported operations:
	       ping - verify connectivity to server (default)
	       host - obtain host information from server
	       cpu  - obtain cpu information from server

       -o, --oui
	      use specified OUI number to multiplex vendor mads

       -S, --Server
	      start in server mode (do not return)

COMMON OPTIONS

       Most  OpenIB  diagnostics  take the following common flags. The exact list of supported flags per utility can be found in the usage message
       and can be shown using the util_name -h syntax.

       # Debugging flags

       -d      raise the IB debugging level.
	       May be used several times (-ddd or -d -d -d).

       -e      show send and receive errors (timeouts and others)

       -h      show the usage message

       -v      increase the application verbosity level.
	       May be used several times (-vv or -v -v -v)

       -V      show the version info.

       # Addressing flags

       -G      use GUID address argument. In most cases, it is the Port GUID.
	       Example:
	       "0x08f1040023"

       -s <smlid>      use 'smlid' as the target lid for SM/SA queries.

       # Other common flags:

       -C <ca_name>    use the specified ca_name.

       -P <ca_port>    use the specified ca_port.

       -t <timeout_ms> override the default timeout for the solicited mads.

       Multiple CA/Multiple Port Support

       When no IB device or port is specified, the port to use is selected by the following criteria:

       1. the first port that is ACTIVE.

       2. if not found, the first port that is UP (physical link up).

       If a port and/or CA name is specified, the user request is attempted to be fulfilled, and will fail if it is not possible.

AUTHOR

       Hal Rosenstock
	      <halr@voltaire.com>

OpenIB								  August 11, 2006						      IBSYSSTAT(8)

IBADDR(8)							OpenIB Diagnostics							 IBADDR(8)

NAME

       ibaddr - query InfiniBand address(es)

SYNOPSIS

       ibaddr  [-d(ebug)]  [-D(irect)]	[-G(uid)]  [-l(id_show)]  [-g(id_show)]  [-C  ca_name]	[-P  ca_port] [-t(imeout) timeout_ms] [-V(ersion)]
       [-h(elp)] [<lid | dr_path | guid>]

DESCRIPTION

       Display the lid (and range) as well as the GID address of the port specified (by DR path, lid, or GUID) or the local port by default.

       Note: this utility can be used as simple address resolver.

OPTIONS

       -G, --Guid
	      show lid range and gid for GUID address

       -l, --lid_show
	      show lid range only

       -L, --Lid_show
	      show lid range (in decimal) only

       -g, --gid_show
	      show gid address only

COMMON OPTIONS

       Most OpenIB diagnostics take the following common flags. The exact list of supported flags per utility can be found in  the  usage  message
       and can be shown using the util_name -h syntax.

       # Debugging flags

       -d      raise the IB debugging level.
	       May be used several times (-ddd or -d -d -d).

       -e      show send and receive errors (timeouts and others)

       -h      show the usage message

       -v      increase the application verbosity level.
	       May be used several times (-vv or -v -v -v)

       -V      show the version info.

       # Addressing flags

       -D      use directed path address arguments. The path
	       is a comma separated list of out ports.
	       Examples:
	       "0"	       # self port
	       "0,1,2,1,4"     # out via port 1, then 2, ...

       -G      use GUID address argument. In most cases, it is the Port GUID.
	       Example:
	       "0x08f1040023"

       -s <smlid>      use 'smlid' as the target lid for SM/SA queries.

       # Other common flags:

       -C <ca_name>    use the specified ca_name.

       -P <ca_port>    use the specified ca_port.

       -t <timeout_ms> override the default timeout for the solicited mads.

       Multiple CA/Multiple Port Support

       When no IB device or port is specified, the port to use is selected by the following criteria:

       1. the first port that is ACTIVE.

       2. if not found, the first port that is UP (physical link up).

       If a port and/or CA name is specified, the user request is attempted to be fulfilled, and will fail if it is not possible.

EXAMPLES

       ibaddr		       # local port's address

       ibaddr 32	       # show lid range and gid of lid 32

       ibaddr -G 0x8f1040023   # same but using guid address

       ibaddr -l 32	       # show lid range only

       ibaddr -L 32	       # show decimal lid range only

       ibaddr -g 32	       # show gid address only

SEE ALSO

       ibroute(8), ibtracert(8)

AUTHOR

       Hal Rosenstock
	      <halr@voltaire.com>

OpenIB								   June 18, 2007							 IBADDR(8)