PVRESIZE(8) System Manager's Manual PVRESIZE(8)NAME
pvresize - resize a disk or partition in use by LVM2
SYNOPSIS
pvresize [-d|--debug] [-h|--help] [-t|--test] [-v|--verbose] [--version] [--setphysicalvolumesize size] PhysicalVolume [PhysicalVolume...]
DESCRIPTION
pvresize resizes PhysicalVolume which may already be in a volume group and have active logical volumes allocated on it.
OPTIONS
See lvm(8) for common options.
--setphysicalvolumesize size
Overrides the automatically-detected size of the PV. Use with care, or prior to reducing the physical size of the device.
EXAMPLES
Expand the PV on /dev/sda1 after enlarging the partition with fdisk:
pvresize /dev/sda1
Shrink the PV on /dev/sda1 prior to shrinking the partition with fdisk (ensure that the PV size is appropriate for your intended new parti-
tion size):
pvresize --setphysicalvolumesize 40G /dev/sda1
RESTRICTIONS
pvresize will refuse to shrink PhysicalVolume if it has allocated extents after where its new end would be. In the future, it should relo-
cate these elsewhere in the volume group if there is sufficient free space, like pvmove does.
pvresize won't currently work correctly on LVM1 volumes or PVs with extra metadata areas.
SEE ALSO lvm(8), pvmove(8), lvresize(8), fdisk(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) PVRESIZE(8)
Check Out this Related Man Page
PVCREATE(8) System Manager's Manual PVCREATE(8)NAME
pvcreate - initialize a disk or partition for use by LVM
SYNOPSIS
pvcreate [-d|--debug] [-f[f]|--force [--force]] [-y|--yes] [-h|--help] [-v|--verbose] [-V|--version] PhysicalVolume [PhysicalVolume...]
DESCRIPTION
pvcreate initializes PhysicalVolume for later use by the Logical Volume Manager (LVM). Each PhysicalVolume can be a disk partition, whole
disk, meta device, or loopback file. For DOS disk partitions, the partition id must be set to 0x8e using fdisk(8), cfdisk(8), or a equiva-
lent. For whole disk devices only the partition table must be erased, which will effectively destroy all data on that disk. This can be
done by zeroing the first sector with:
dd if=/dev/zero of=PhysicalVolume bs=512 count=1
Continue with vgcreate(8) to create a new volume group on PhysicalVolume, or vgextend(8) to add PhysicalVolume to an existing volume group.
OPTIONS
-d, --debug
Enables additional debugging output (if compiled with DEBUG).
-f, --force
Force the creation without any confirmation. You can not recreate (reinitialize) a physical volume belonging to an existing volume
group. In an emergency you can override this behaviour with -ff. In no case case can you initialize an active physical volume with
this command.
-s, --size
Overrides the size of the physical volume which is normally retrieved. Useful in rare case where this value is wrong. More useful
to fake large physical volumes of up to 2 Terabyes - 1 Kilobyte on smaller devices for testing purposes only where no real access to
data in created logical volumes is needed. If you wish to create the supported maximum, use "pvcreate -s 2147483647k PhysicalVolume
[PhysicalVolume ...]". All other LVM tools will use this size with the exception of lvmdiskscan(8)-y, --yes
Answer yes to all questions.
-h, --help
Print a usage message on standard output and exit successfully.
-v, --verbose
Gives verbose runtime information about pvcreate's activities.
-V, --version
Print the version number on standard output and exit successfully.
Example
Initialize partition #4 on the third SCSI disk and the entire fifth SCSI disk for later use by LVM:
pvcreate /dev/sdc4 /dev/sde
DIAGNOSTICS
pvcreate returns an exit code of 0 for success or > 0 for error:
1 no physical volume on command line
2 error removing existing lvmtab entry for new physical volume
3 error setting up physical volume structure
4 error writing physical volume structure to disk
5 wrong partition type identifier
6 error physical volume name
7 error getting size of physical volume
95 driver/module not in kernel
96 invalid I/O protocol version
97 error locking logical volume manager
98 invalid lvmtab (run vgscan(8))
99 invalid command line
SEE ALSO lvm(8), vgcreate(8), vgextend(8), lvcreate(8), cfdisk(8), fdisk(8), losetup(8), mdadd(8)AUTHOR
Heinz Mauelshagen <Linux-LVM@Sistina.com>
Heinz Mauelshagen LVM TOOLS PVCREATE(8)