uvisor(4) [linux man page]

UVISOR(4)						   BSD Kernel Interfaces Manual 						 UVISOR(4)

NAME

     uvisor -- USB support for the PalmOS based PDAs

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device uvisor
	   device ucom

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   uvisor_load="YES"

DESCRIPTION

     The uvisor driver provides support for USB based PalmOS PDAs, like Handspring Visor, Palm Mxxx series, and Sony Clie.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).  The device has several ports for different purposes,
     each of them gets its own ucom(4) device.	The attach message describes the purpose of each port.

     The usual Pilot tools can be used to access the attached device on the HotSync port.

HARDWARE

     The uvisor driver supports the following devices:

     o	 Aceeca Mez1000 RDA
     o	 Handspring Treo
     o	 Handspring Treo 600
     o	 Handspring Visor
     o	 Palm I705
     o	 Palm M125
     o	 Palm M130
     o	 Palm M500
     o	 Palm M505
     o	 Palm M515
     o	 Palm Tungsten T
     o	 Palm Tungsten Z
     o	 Palm Zire
     o	 Palm Zire 31
     o	 Sony Clie 4.0
     o	 Sony Clie 4.1
     o	 Sony Clie 5.0
     o	 Sony Clie PEG-S500C
     o	 Sony Clie NX60
     o	 Sony Clie S360
     o	 Sony Clie TJ37

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uvisor driver was adopted from NetBSD 1.5 in August 2002.  This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org>
     at that time.

BUGS

     The code to provide multiple ucom(4) instances has not yet been ported from NetBSD.  It is unclear whether this driver works in its current
     state.

BSD
								 November 22, 2006							       BSD

UPLCOM(4)						   BSD Kernel Interfaces Manual 						 UPLCOM(4)

NAME

     uplcom -- USB support for Prolific PL-2303/2303X/2303HX serial adapters driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device usb
	   device ucom
	   device uplcom

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   uplcom_load="YES"

DESCRIPTION

     The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge
     chips.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     The uplcom driver supports the following devices and adapters:

     o	 ADLINK ND-6530 USB-Serial Adapter
     o	 Alcatel One Touch 535/735 Phone
     o	 Alcor AU9720 USB-RS232 Serial Adapter
     o	 AlDiga AL-11U Modem
     o	 Alltronix ACM003U00 Modem
     o	 Anchor Serial adapter
     o	 ATEN UC-232A
     o	 BAFO BF-800 and BF-810
     o	 Belkin F5U257
     o	 BenQ S81 Phone
     o	 Corega CG-USBRS232R Serial Adapter
     o	 Cressi Edy (Seiko) Diving Computer
     o	 ELECOM UC-SGT Serial Adapter
     o	 HAL Corporation Crossam2+USB IR commander
     o	 Hama USB RS-232 Serial Adapter
     o	 Hamlet exagerate XURS232
     o	 HP LD220 Point-Of-Sale (POS) Display
     o	 IOGEAR UC-232A
     o	 I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5
     o	 iTegno WM1080A GSM/GFPRS Modem
     o	 iTegno WM2080A CDMA Modem
     o	 Leadtek 9531 GPS
     o	 Micromax 610U Modem
     o	 Microsoft Palm 700WX
     o	 Mobile Action MA-620 Infrared Adapter
     o	 Motorola Cables
     o	 Nokia CA-42 Cable
     o	 OTI DKU-5 cable
     o	 Panasonic TY-TP50P6-S flat screen
     o	 PLX CA-42 Phone Cable
     o	 PLANEX USB-RS232 URS-03
     o	 Prolific Generic USB-Serial Adapters
     o	 Prolific Pharos USB-Serial Adapter
     o	 RATOC REX-USB60
     o	 Radio Shack USB Serial Cable
     o	 Sagem USB-Serial Adapter
     o	 Samsung I330 Phone Cradle
     o	 Sandberg USB to Serial Link (model number 133-08)
     o	 Sanwa KB-USB2 Multimeter cable
     o	 Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones
     o	 Sitecom USB-Serial Adapter
     o	 SMART Technologies USB-Serial Adapter
     o	 Sony QN3 Phone Cable
     o	 Sony Ericsson Datapilot
     o	 Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables
     o	 SOURCENEXT KeikaiDenwa 8 (with and without charger)
     o	 Speed Dragon USB-Serial Cable
     o	 Syntech CPT-8001C Barcode Scanner
     o	 TDK UHA6400 and UPA9664 USB-PHS Adapters
     o	 TRENDnet USB to Serial Converter (TU-S9)
     o	 Tripp-Lite U209-000-R USB-Serial Adapter
     o	 UIC HCR331 Magnetic Stripe Card Reader
     o	 UIC MSR206 Magnetic Stripe Card Reader
     o	 Willcom W-SIM DD PHS terminal.(WS002IN)
     o	 YC-Cable USB-Serial Adapter
     o	 Zeagle N2iTion3 Diving Computer

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uplcom driver appeared in NetBSD 1.6.	This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

BSD
								   July 25, 2012							       BSD