lsusb(8) Linux USB Utilities lsusb(8)NAME
lsusb - list USB devices
SYNOPSIS
lsusb [ options ]
DESCRIPTION
lsusb is a utility for displaying information about USB buses in the system and the devices connected to them.
OPTIONS -v, --verbose
Tells lsusb to be verbose and display detailed information about the devices shown. This includes configuration descriptors for the
device's current speed. Class descriptors will be shown, when available, for USB device classes including hub, audio, HID, communi-
cations, and chipcard.
-s [[bus]:][devnum]
Show only devices in specified bus and/or devnum. Both ID's are given in decimal and may be omitted.
-d [vendor]:[product]
Show only devices with the specified vendor and product ID. Both ID's are given in hexadecimal.
-D device
Do not scan the /dev/bus/usb directory, instead display only information about the device whose device file is given. The device
file should be something like /dev/bus/usb/001/001. This option displays detailed information like the v option; you must be root
to do this.
-t Tells lsusb to dump the physical USB device hierarchy as a tree. This overrides the v option.
-V, --version
Print version information on standard output, then exit successfully.
RETURN VALUE
If the specified device is not found, a non-zero exit code is returned.
FILES
/var/lib/usbutils/usb.ids
A list of all known USB ID's (vendors, products, classes, subclasses and protocols).
SEE ALSO lspci(8), usbview(8).
AUTHOR
Thomas Sailer, <sailer@ife.ee.ethz.ch>.
usbutils-007 6 May 2009 lsusb(8)
Check Out this Related Man Page
lsusb(8) Linux USB Utilities lsusb(8)NAME
lsusb - list USB devices
SYNOPSIS
lsusb [ options ]
DESCRIPTION
lsusb is a utility for displaying information about USB buses in the system and the devices connected to them.
OPTIONS -v, --verbose
Tells lsusb to be verbose and display detailed information about the devices shown. This includes configuration descriptors for the
device's current speed. Class descriptors will be shown, when available, for USB device classes including hub, audio, HID, communi-
cations, and chipcard.
-s [[bus]:][devnum]
Show only devices in specified bus and/or devnum. Both ID's are given in decimal and may be omitted.
-d [vendor]:[product]
Show only devices with the specified vendor and product ID. Both ID's are given in hexadecimal.
-D device
Do not scan the /dev/bus/usb directory, instead display only information about the device whose device file is given. The device
file should be something like /dev/bus/usb/001/001. This option displays detailed information like the v option; you must be root
to do this.
-t Tells lsusb to dump the physical USB device hierarchy as a tree. This overrides the v option.
-V, --version
Print version information on standard output, then exit successfully.
RETURN VALUE
If the specified device is not found, a non-zero exit code is returned.
FILES
/var/lib/usbutils/usb.ids
A list of all known USB ID's (vendors, products, classes, subclasses and protocols).
SEE ALSO lspci(8), usbview(8).
AUTHOR
Thomas Sailer, <sailer@ife.ee.ethz.ch>.
usbutils-007 6 May 2009 lsusb(8)
I have been reading prep questions for my second unix academy exam, and there's a nuance, I'm not sure I understand it correctly.
I've been under impression from my readings of book by Evi Nemeth and from unix academy DVDs I've been watching, that kernel's modules are drivers. I think of it, as... (25 Replies)
Are there any other useful hardware commands to get information about your hardware? Is there any information that can't be found with these commands?
cat /proc/cpuinfo
cat /proc/meminfo
dmesg
lspci
sudo dmidecode
cpuid | more
lspci -v | grep VGA
sudo lspci -v -s 00:02.0
sudo lspci -vvv... (12 Replies)
I have Ubuntu 16.04 (dual boot with Windows 10) and a HP Spectre x360 laptop.
I have recently bought a Dell Ultrasharp U2515H monitor, which I connect via a Dell docking station.
When I plug the docking station to my laptop on Windows, both monitors are detected and everything works fine.
... (23 Replies)
Hello guys,
I need an open source tool that can list all the softwares installed in my unix/linux servers, the tool should list all the softwares installed and the current version, grouped by the hostname, anybody know any solution for this specific problem?
Thanks guys, have a good day! (7 Replies)
Dear Moderator,
While working on airmon-ng when the situation has come to set wlan0 on monitor mode
Identification Wlan0
root@kali:~# iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated ... (1 Reply)
I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
We have a simple menu with prompt of menu numbers to user.
It is still under construction.
Is there a way to "count" the menu choices so the prompt maximum count can be changed dynamically?
See attached TODO note in code
read_options(){
local choice
# the... (7 Replies)
$LINENO is bash "system" variable but I cannot get any output trying to use it.
Am I missing something fundamental?
Here is the code snippet
13)
247 echo "TEMPLATE Option 13"
248
249 # *** BEGIN DEBUG BLOCK ***
250 last_cmd_arg=$_ # Save it.
251
... (6 Replies)
This is a two part request for an assistance.
I am not sure how retrieve value from basename command - line 270 -so in can be output as variable CLI_COMMAND - line 250 in whiptail input box.
As coded I can input from keyboard ( stdin?) into input box using redirection.
I can... (2 Replies)
Here is a code snippet using whiptail , it fails to complete giving me long list of options available for whiptail .
That is great, but how do I determine which of the current opinions is wrong?
I did tried inserting comment (#) into options and it just did not work.
Deleting the option... (9 Replies)
I am learning about bash system variables, such as $ , @ and #.
I have this piece of script implementing an array and it is doing its job just fine.
This is not the only array I will be using.
Just for ease of maintenance and more coding I would like to have the arrays in two dimensional... (4 Replies)
I am embarrassed to ask this but I am at the end of my rope.
I am trying to assign one (string) variable to another.
I do understand that bash variables are "not typed", but still learning usage of {} and spaces in script.
I was hoping this syntax would work
$variableA =... (6 Replies)
I may have asked this before, so forgive OF.
Problem:
I can pass positioning array as -- menu option to whiptail, but it does not show in the whiptail form as an array - only single (first member "lsusb" ) entry / line shows up.
Code:
DynamicEntry=$(whiptail \
--title "DEBUG... (1 Reply)
Hey guys, I am trying to figure out why this touchscreen is not working. I am attempting to run ts_calibrate which (on my kernel) can be found @ usr/bin When I run the script:
root:/usr/bin# ts_calibrate
xres = 1920, yres = 1080
tslib: Selected device is not a touchscreen (must support ABS and... (1 Reply)