AHCISATA(4) BSD Kernel Interfaces Manual AHCISATA(4)NAME
ahcisata -- AHCI 1.0 and 1.1 compliant SATA controllers driver
SYNOPSIS
ahcisata* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The ahcisata driver supports SATA controllers compliant with the Serial ATA Advanced Host Controller Interface Revision 1.0 or 1.1 specifica-
tion, and provides the interface to the hardware for the ata(4) driver.
The ahcisata driver will only attach if the controller has been put in AHCI mode by the BIOS; if the controller is in pciide-compatible mode,
it will be handled by the appropriate driver (piixide(4) for Intel AHCI controllers).
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)
Intel Corporation, Serial ATA Advanced Host Controller Interface (AHCI), Revision 1.3,
http://download.intel.com/technology/serialata/pdf/rev1_3.pdf, June 26, 2008.
BUGS
Native Command Queuing is not yet supported.
BSD March 18, 2011 BSD
Check Out this Related Man Page
IXPIDE(4) BSD Kernel Interfaces Manual IXPIDE(4)NAME
ixpide -- PCI IDE disk controllers driver
SYNOPSIS
ixpide* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The ixpide driver supports the ATI Technologies IXP IDE controller, and provides the interface with the hardware for the ata(4) driver.
The 0x0002 flag forces the ixpide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debugging
aid, or to work around problems where the IDE controller is wired up to the system incorrectly.
HARDWARE
The supported IDE controllers are
o ATI SB200
o ATI SB300
o ATI SB400, Parallel ATA
o ATI SB400, Serial ATA
o ATI SB700, Serial and Parallel ATA
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)CAVEATS
Some SB700 controllers can hang under load when Native IDE mode is selected in the system BIOS, but work fine in AHCI mode.
BSD October 16, 2008 BSD
CPU/Speed: PowerPC 603ev 200Mhz
Ram: 92M EDO Ram
Motherboard: Apple
Bus: 2 PCI
Cache: L1 32k and L2 256k
Controller: ATA
Disk: 2GB ATA
Load: 1 user, running httpd, Xwin, various daemons
Kernel: Linux 2.4.22-2f
Kernel ELF?: ???
pgms: gcc versión 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a);... (0 Replies)
Hi guys,
I have this quick question , is it posible to isntall SCO 5.0.7 on a serial ATA and if it is can you tell me how or maybe a website that has some info about this.
I'm not using any raid, just one HDD.
Thanks a lot (0 Replies)
Hello,
I get the following in one of my error logs:
Device /dev/sda, SATA disks accessed
via libata are not currently supported by smartmontools. When libata is
given an ATA
pass-thru ioctl() then an additional '-d libata' device type will be
added to smartmontools.
---------------
I... (0 Replies)
Hello,
I get the following in one of my error logs:
Device /dev/sda, SATA disks accessed
via libata are not currently supported by smartmontools. When libata is
given an ATA
pass-thru ioctl() then an additional '-d libata' device type will be
added to smartmontools.
---------------
I... (0 Replies)
Hello,
I get the following in one of my error logs:
Device /dev/sda, SATA disks accessed
via libata are not currently supported by smartmontools. When libata is
given an ATA
pass-thru ioctl() then an additional '-d libata' device type will be
added to smartmontools.
---------------
... (1 Reply)
Discussion started by: mojoman
1 Replies
7. Post Here to Contact Site Administrators and Moderators
Where can I download the VTC - Unix Shell Scripting Advanced complete video.
I don't know in which thread I should post this question.Plz help me out, or just tell me the link in the reply to this post.
Thanks in advance. (0 Replies)
Hello,
I wanted to share an experience I had today which was quite a learning experience and perhaps useful for others who may run into the issue at some point in the future.
Basically, the scenario involves a OS which was installed on a machine which hardware-wise, had a SATA Drive. The... (0 Replies)
We have 2 controllers in storage
controller A is working, configured in Storage
Controller B is not configured in Storage, but Power supply is connected for controller B.
my query is, for some reason if power goes down for Controller A, wheather it will be redundant using Controllers... (1 Reply)
Hi All,
I have a Thinkpad - T430, which is having the wireless card as "03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205".
This one i need to configure as wifi hotspot. which i believe need to configure hostapd.conf, this kind of configuration is new to me anybody done... (1 Reply)
I'm looking for driver for SunSAI/P 3.0 (Serial Asynchronous Interface) card X2156A for Solaris. It used to be on sun-solve, but I fail to find it on the Oracle site. Any help would be very appreciated! (1 Reply)
Hi
I hope this is the right forum.
I am attempting to install SCO 5.0.7 on a Proliant DL380 G7 with a Smart Array P410I Controller.
I need a driver for this. Can anybody point me to a download?
Thanks in anticipation. (12 Replies)
Hi all,
A client has an SCO OpenServer Server 6.0, that is running on an HP ProLiant Box and they lost the root password.
Its equipped with a Doal-Core Intel Pentium Processor. They don't have any media or emergency disk anymore.
I tried to boot with the CD Rom, then "Tools", then exit to... (7 Replies)