JMIDE(4) BSD Kernel Interfaces Manual JMIDE(4)NAME
jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver
SYNOPSIS
jmide* at pci? dev ? function ? flags 0x0000
ahcisata* at jmide?
DESCRIPTION
The jmide driver supports the JMicron Technology JMB36x IDE controllers.
These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133 ports and/or 1 or 2 SATA-II ports), and are highly flexible. The
SATA ports can be attached to the integrated AHCI controller or attached to the PCI IDE channels in PATA emulation, in either single-drive
emulation on each PCI IDE channels, or in master/slave emulation on one of the PCI IDE channels.
When enabled, the AHCI controller can either be on the PCI function 0 or function 2. The PCI IDE controller can also be on either PCI func-
tion, and can share the PCI function with AHCI. The jmide driver supports both the AHCI controller and PCI IDE controller in various config-
urations.
SEE ALSO ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)AUTHORS
The jmide driver was written by Manuel Bouyer.
BSD July 2, 2007 BSD
Check Out this Related Man Page
AHCISATA(4) BSD Kernel Interfaces Manual AHCISATA(4)NAME
ahcisata -- AHCI 1.0 and 1.1 compliant SATA controllers driver
SYNOPSIS
ahcisata* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The ahcisata driver supports SATA controllers compliant with the Serial ATA Advanced Host Controller Interface Revision 1.0 or 1.1 specifica-
tion, and provides the interface to the hardware for the ata(4) driver.
The ahcisata driver will only attach if the controller has been put in AHCI mode by the BIOS; if the controller is in pciide-compatible mode,
it will be handled by the appropriate driver (piixide(4) for Intel AHCI controllers).
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)
Intel Corporation, Serial ATA Advanced Host Controller Interface (AHCI), Revision 1.3,
http://download.intel.com/technology/serialata/pdf/rev1_3.pdf, June 26, 2008.
BUGS
Native Command Queuing is not yet supported.
BSD March 18, 2011 BSD
Hi,
I have got myself a new hard disk- a 80 GB SATA IDE from Seagate. When I try installing Red Hat Linux 9(and RHL 7.2 too), it displays an error message saying that it fails to detect any hard drive. In the BIOS, I tried changing the drive configuration to "Legacy Drive", but that didnt help... (5 Replies)
Ive never installed unix and have a hp proliant dl360 g5 server with E200i array controller and have no idea how to make it see the controller with bootstrap any ideas? (4 Replies)
Dear Solarizer,
If i have a disk let say like this c1t0d0s0
How to change the controller to be come example : c3t0d0s0
Thanxs For your replay
Regads,
tpx (3 Replies)
why is this error message keeps coming once every month. Is this a serious problem?
In the /var/adm/messages file
Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report:
Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26... (7 Replies)
Hi there all, *again* :P
well I have a problem.
I added a new HD in my system specially for my VMachines.
in the bios I see the HD come up (its an old IDE HD that is inserted as slave)
So I would think that I should see him as /dev/hdb
but I dont see him at all in fdisk or what so ever.
I... (3 Replies)
Hi,
I have read about a vulnerability that allows to lock any IDE/SATA hard drive with a password, unless the BIOS "freezes" the drive's (no-password) status.
Even though less secure, this protection can also be archieved by software (only few BIOSes have that feature). hdparm offers a... (4 Replies)
HI guys, I have a very old Sun Ultra 10 box at home I have been using as a backup server via Samba and admining via webmin, all it does it store data on a IDE 160 gig drive. I have been using it for years and years and all has been good till now, its running Solaris 9 on it. I only turn it on when... (11 Replies)
I had ACER aspiron one netbook with dual bootable (Windows XP and Debian). Recently I found XP is messy and Debian has new version published. I plan to recover XP and install new version of Debian. But I failed to recover XP from Hidden Partition.
I thought it is because I install GRUB in the... (15 Replies)
Hello everybody,
I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors.
The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my... (4 Replies)
I have an upgrade path in mind for a new computer that will be stocked with a 2TB SATA 300 hard disk. This is a choice based on information that SATA 300 is not necessarily faster than SATA 600. The upgrade path in a year time or so would then involve the purchase of an SSD that would contain the... (4 Replies)
PCI-X was popular years ago, now it's not. Today's motherboards have PCIe slots, not PCI-X slots. I'm accustomed to using Adaptec, but I believe they've been bought out by ATTO Technology. Now ATTO has a product called PCI UL50 Dual Channel VHDCI Ultra320 SCSI PCIe card. So: does the SCO UNIX... (7 Replies)
I am very new to SCO Unix so I apologize if this is a easy or dumb question.
I have a 160GB SATA hard drive and SATA CD-ROM drive connected to one of my systems. I have both the drives running in compatibility mode. I also have the hard drive set as a primary master and the CD-ROM drive set as... (10 Replies)
I have Sun Ultra 5/10 UltraSPARC-IIi 440 Mhz ) OpenBoot 3.19 with 1024 MB and IDE disk
I have the following error shown in the attached photos and video kindly advise (5 Replies)
Ubuntu, Bash 4.3.48
Hi,
I have this input file with many columns separated with ":"
ARC=121:ERF=12244:IDE=2334:ADA=34 ....
ERF=124:ARC=123:IDE=2344:ADA=54 ....
ERF=16254:IDE=2434:ADA=78:ARC=134 ....
and I want this:
ARC=121:IDE=2334
ARC=123:IDE=2344
ARC=134:IDE=2434
I need to... (5 Replies)