uhmodem(4) [netbsd man page]

UHMODEM(4)						   BSD Kernel Interfaces Manual 						UHMODEM(4)

NAME

     uhmodem -- USB support for Huawei 3G wireless modem device

SYNOPSIS

     uhmodem*  at uhub?
     ucom*  at uhmodem?

HARDWARE

     The uhmodem driver supports the following adapters:

	   Huawei E220
	   E-mobile D01HW
	   E-mobile D02HW
	   NTT DoCoMo a2502

DESCRIPTION

     The uhmodem driver provides support for the Huawei 3G wireless modems and its variants.  This type of device has multiple com ports.  And
     some modems have own storage to contain its device driver (for Windows).  The uhmodem driver can handle all of these functions on the device.

     When the device attached, it will attach multiple ucom devices.  The former one is main com device to use communication with your network
     provider, and others are sub com devices to monitor the condition of data communication and/or network status.  These com devices can be used
     simultaneously.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

SEE ALSO

     tty(4), ubsa(4), ucom(4), usb(4)

HISTORY

     The uhmodem driver first appeared in NetBSD 5.0.  Separate from ubsa driver.

BSD
								  January 8, 2008							       BSD

UBSA(4) 						   BSD Kernel Interfaces Manual 						   UBSA(4)

NAME

     ubsa -- USB support for Belkin serial adapters

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device usb
	   device ucom
	   device ubsa

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   ubsa_load="YES"

DESCRIPTION

     The ubsa driver provides support for the USB-to-RS232 Bridge chip used by a variety of serial adapters from Belkin and other vendors.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     The ubsa driver supports the following adapters:

     o	 AnyData ADU-500A EV-DO modem
     o	 AnyData ADU-E100A (no EV-DO mode support)
     o	 Belkin F5U103
     o	 Belkin F5U120
     o	 e-Tek Labs Kwik232
     o	 GoHubs GoCOM232
     o	 Peracom single port serial adapter

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The ubsa driver appeared in FreeBSD 5.0.  The uplcom(4) manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002
     and modified for the ubsa driver by Alexander Kabaev <kan@FreeBSD.org> in October 2002.

AUTHORS

     The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>.

BSD
								 November 20, 2011							       BSD