BUS_SPACE(9) BSD Kernel Developer's Manual BUS_SPACE(9)
NAME
bus_space, bus_space_barrier, bus_space_copy_region_1, bus_space_copy_region_2, bus_space_copy_region_4, bus_space_copy_region_8,
bus_space_free, bus_space_handle_is_equal, bus_space_is_equal, bus_space_map, bus_space_mmap, bus_space_peek_1, bus_space_peek_2,
bus_space_peek_4, bus_space_peek_8, bus_space_poke_1, bus_space_poke_2, bus_space_poke_4, bus_space_poke_8, bus_space_read_1,
bus_space_read_2, bus_space_read_4, bus_space_read_8, bus_space_read_multi_1, bus_space_read_multi_2, bus_space_read_multi_4,
bus_space_read_multi_8, bus_space_read_multi_stream_1, bus_space_read_multi_stream_2, bus_space_read_multi_stream_4,
bus_space_read_multi_stream_8, bus_space_read_region_1, bus_space_read_region_2, bus_space_read_region_4, bus_space_read_region_8,
bus_space_read_region_stream_1, bus_space_read_region_stream_2, bus_space_read_region_stream_4, bus_space_read_region_stream_8,
bus_space_read_stream_1, bus_space_read_stream_2, bus_space_read_stream_4, bus_space_read_stream_8, bus_space_release,
bus_space_reservation_addr, bus_space_reservation_init, bus_space_reservation_size, bus_space_reservation_map, bus_space_reservation_unmap,
bus_space_reserve, bus_space_reserve_subregion, bus_space_set_region_1, bus_space_set_region_2, bus_space_set_region_4,
bus_space_set_region_8, bus_space_subregion, bus_space_tag_create, bus_space_tag_destroy, bus_space_unmap, bus_space_vaddr,
bus_space_write_1, bus_space_write_2, bus_space_write_4, bus_space_write_8, bus_space_write_multi_1, bus_space_write_multi_2,
bus_space_write_multi_4, bus_space_write_multi_8, bus_space_write_multi_stream_1, bus_space_write_multi_stream_2,
bus_space_write_multi_stream_4, bus_space_write_multi_stream_8, bus_space_write_region_1, bus_space_write_region_2, bus_space_write_region_4,
bus_space_write_region_8, bus_space_write_region_stream_1, bus_space_write_region_stream_2, bus_space_write_region_stream_4,
bus_space_write_region_stream_8, bus_space_write_stream_1, bus_space_write_stream_2, bus_space_write_stream_4, bus_space_write_stream_8 --
bus space manipulation functions
SYNOPSIS
#include <sys/bus.h>
bool
bus_space_handle_is_equal(bus_space_tag_t space, bus_space_handle_t handle1, bus_space_handle_t handle2);
bool
bus_space_is_equal(bus_space_tag_t space1, bus_space_tag_t space2);
void
bus_space_release(bus_space_tag_t t, bus_space_reservation_t *bsr);
int
bus_space_reserve(bus_space_tag_t t, bus_addr_t bpa, bus_size_t size, int flags, bus_space_reservation_t *bsrp);
int
bus_space_reserve_subregion(bus_space_tag_t t, bus_addr_t reg_start, bus_addr_t reg_end, bus_size_t size, bus_size_t alignment,
bus_size_t boundary, int flags, bus_space_reservation_t *bsrp);
void
bus_space_reservation_init(bus_space_reservation_t *bsr, bus_addr_t addr, bus_size_t size);
bus_size_t
bus_space_reservation_size(bus_space_reservation_t *bsr);
int
bus_space_reservation_map(bus_space_tag_t t, bus_space_reservation_t *bsr, int flags, bus_space_handle_t *bshp);
void
bus_space_reservation_unmap(bus_space_tag_t t, bus_space_handle_t bsh, bus_size_t size);
int
bus_space_map(bus_space_tag_t space, bus_addr_t address, bus_size_t size, int flags, bus_space_handle_t *handlep);
void
bus_space_unmap(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t size);
int
bus_space_subregion(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, bus_size_t size, bus_space_handle_t *nhandlep);
int
bus_space_alloc(bus_space_tag_t space, bus_addr_t reg_start, bus_addr_t reg_end, bus_size_t size, bus_size_t alignment, bus_size_t boundary,
int flags, bus_addr_t *addrp, bus_space_handle_t *handlep);
void
bus_space_free(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t size);
void *
bus_space_vaddr(bus_space_tag_t space, bus_space_handle_t handle);
paddr_t
bus_space_mmap(bus_space_tag_t space, bus_addr_t addr, off_t off, int prot, int flags);
int
bus_space_tag_create(bus_space_tag_t obst, uint64_t present, uint64_t extpresent, const struct bus_space_overrides *ov, void *ctx,
bus_space_tag_t *bstp);
void
bus_space_tag_destroy(bus_space_tag_t bst);
int
bus_space_peek_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t *datap);
int
bus_space_peek_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t *datap);
int
bus_space_peek_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t *datap);
int
bus_space_peek_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t *datap);
int
bus_space_poke_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t data);
int
bus_space_poke_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t data);
int
bus_space_poke_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t data);
int
bus_space_poke_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t data);
uint8_t
bus_space_read_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset);
uint16_t
bus_space_read_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset);
uint32_t
bus_space_read_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset);
uint64_t
bus_space_read_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset);
void
bus_space_write_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t value);
void
bus_space_write_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t value);
void
bus_space_write_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t value);
void
bus_space_write_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t value);
void
bus_space_barrier(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, bus_size_t length, int flags);
void
bus_space_read_region_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t *datap, bus_size_t count);
void
bus_space_read_region_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t *datap, bus_size_t count);
void
bus_space_read_region_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t *datap, bus_size_t count);
void
bus_space_read_region_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t *datap, bus_size_t count);
void
bus_space_read_region_stream_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t *datap, bus_size_t count);
void
bus_space_read_region_stream_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t *datap, bus_size_t count);
void
bus_space_read_region_stream_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t *datap, bus_size_t count);
void
bus_space_read_region_stream_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t *datap, bus_size_t count);
void
bus_space_write_region_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint8_t *datap, bus_size_t count);
void
bus_space_write_region_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint16_t *datap, bus_size_t count);
void
bus_space_write_region_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint32_t *datap, bus_size_t count);
void
bus_space_write_region_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint64_t *datap, bus_size_t count);
void
bus_space_write_region_stream_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint8_t *datap, bus_size_t count);
void
bus_space_write_region_stream_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint16_t *datap,
bus_size_t count);
void
bus_space_write_region_stream_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint32_t *datap,
bus_size_t count);
void
bus_space_write_region_stream_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint64_t *datap,
bus_size_t count);
void
bus_space_copy_region_1(bus_space_tag_t space, bus_space_handle_t srchandle, bus_size_t srcoffset, bus_space_handle_t dsthandle,
bus_size_t dstoffset, bus_size_t count);
void
bus_space_copy_region_2(bus_space_tag_t space, bus_space_handle_t srchandle, bus_size_t srcoffset, bus_space_handle_t dsthandle,
bus_size_t dstoffset, bus_size_t count);
void
bus_space_copy_region_4(bus_space_tag_t space, bus_space_handle_t srchandle, bus_size_t srcoffset, bus_space_handle_t dsthandle,
bus_size_t dstoffset, bus_size_t count);
void
bus_space_copy_region_8(bus_space_tag_t space, bus_space_handle_t srchandle, bus_size_t srcoffset, bus_space_handle_t dsthandle,
bus_size_t dstoffset, bus_size_t count);
void
bus_space_set_region_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t value, bus_size_t count);
void
bus_space_set_region_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t value, bus_size_t count);
void
bus_space_set_region_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t value, bus_size_t count);
void
bus_space_set_region_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t value, bus_size_t count);
void
bus_space_read_multi_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t *datap, bus_size_t count);
void
bus_space_read_multi_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t *datap, bus_size_t count);
void
bus_space_read_multi_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t *datap, bus_size_t count);
void
bus_space_read_multi_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t *datap, bus_size_t count);
void
bus_space_read_multi_stream_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint8_t *datap, bus_size_t count);
void
bus_space_read_multi_stream_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint16_t *datap, bus_size_t count);
void
bus_space_read_multi_stream_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint32_t *datap, bus_size_t count);
void
bus_space_read_multi_stream_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, uint64_t *datap, bus_size_t count);
void
bus_space_write_multi_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint8_t *datap, bus_size_t count);
void
bus_space_write_multi_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint16_t *datap, bus_size_t count);
void
bus_space_write_multi_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint32_t *datap, bus_size_t count);
void
bus_space_write_multi_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint64_t *datap, bus_size_t count);
void
bus_space_write_multi_stream_1(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint8_t *datap, bus_size_t count);
void
bus_space_write_multi_stream_2(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint16_t *datap, bus_size_t count);
void
bus_space_write_multi_stream_4(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint32_t *datap, bus_size_t count);
void
bus_space_write_multi_stream_8(bus_space_tag_t space, bus_space_handle_t handle, bus_size_t offset, const uint64_t *datap, bus_size_t count);
DESCRIPTION
The bus_space functions exist to allow device drivers machine-independent access to bus memory and register areas. All of the functions and
types described in this document can be used by including the <sys/bus.h> header file.
Many common devices are used on multiple architectures, but are accessed differently on each because of architectural constraints. For
instance, a device which is mapped in one system's I/O space may be mapped in memory space on a second system. On a third system, architec-
tural limitations might change the way registers need to be accessed (e.g., creating a non-linear register space). In some cases, a single
driver may need to access the same type of device in multiple ways in a single system or architecture. The goal of the bus_space functions
is to allow a single driver source file to manipulate a set of devices on different system architectures, and to allow a single driver object
file to manipulate a set of devices on multiple bus types on a single architecture.
Not all busses have to implement all functions described in this document, though that is encouraged if the operations are logically sup-
ported by the bus. Unimplemented functions should cause compile-time errors if possible.
All of the interface definitions described in this document are shown as function prototypes and discussed as if they were required to be
functions. Implementations are encouraged to implement prototyped (type-checked) versions of these interfaces, but may implement them as
macros if appropriate. Machine-dependent types, variables, and functions should be marked clearly in <machine/bus_defs.h> and in
<machine/bus_funcs.h> to avoid confusion with the machine-independent types and functions, and, if possible, should be given names which make
the machine-dependence clear.
CONCEPTS AND GUIDELINES
Bus spaces are described by bus space tags, which can be created only by machine-dependent code. A given machine may have several different
types of bus space (e.g., memory space and I/O space), and thus may provide multiple different bus space tags. Individual busses or devices
on a machine may use more than one bus space tag. For instance, ISA devices are given an ISA memory space tag and an ISA I/O space tag.
Architectures may have several different tags which represent the same type of space, for instance because of multiple different host bus
interface chipsets.
A range in bus space is described by a bus address and a bus size. The bus address describes the start of the range in bus space. The bus
size describes the size of the range in bytes. Busses which are not byte addressable may require use of bus space ranges with appropriately
aligned addresses and properly rounded sizes.
Access to regions of bus space is facilitated by use of bus space handles, which are usually created by mapping a specific range of a bus
space. Handles may also be created by allocating and mapping a range of bus space, the actual location of which is picked by the implementa-
tion within bounds specified by the caller of the allocation function.
All of the bus space access functions require one bus space tag argument, at least one handle argument, and at least one offset argument (a
bus size). The bus space tag specifies the space, each handle specifies a region in the space, and each offset specifies the offset into the
region of the actual location(s) to be accessed. Offsets are given in bytes, though busses may impose alignment constraints. The offset
used to access data relative to a given handle must be such that all of the data being accessed is in the mapped region that the handle
describes. Trying to access data outside that region is an error.
Because some architectures' memory systems use buffering to improve memory and device access performance, there is a mechanism which can be
used to create ``barriers'' in the bus space read and write stream.
There are two types of barriers: ordering barriers and completion barriers.
Ordering barriers prevent some operations from bypassing other operations. They are relatively light weight and described in terms of the
operations they are intended to order. The important thing to note is that they create specific ordering constraint surrounding bus accesses
but do not necessarily force any synchronization themselves. So, if there is enough distance between the memory operations being ordered,
the preceding ones could complete by themselves resulting in no performance penalty.
For instance, a write before read barrier will force any writes issued before the barrier instruction to complete before any reads after the
barrier are issued. This forces processors with write buffers to read data from memory rather than from the pending write in the write buf-
fer.
Ordering barriers are usually sufficient for most circumstances, and can be combined together. For instance a read before write barrier can
be combined with a write before write barrier to force all memory operations to complete before the next write is started.
Completion barriers force all memory operations and any pending exceptions to be completed before any instructions after the barrier may be
issued. Completion barriers are extremely expensive and almost never required in device driver code. A single completion barrier can force
the processor to stall on memory for hundreds of cycles on some machines.
Correctly-written drivers will include all appropriate barriers, and assume only the read/write ordering imposed by the barrier operations.
People trying to write portable drivers with the bus_space functions should try to make minimal assumptions about what the system allows. In
particular, they should expect that the system requires bus space addresses being accessed to be naturally aligned (i.e., base address of
handle added to offset is a multiple of the access size), and that the system does alignment checking on pointers (i.e., pointer to objects
being read and written must point to properly-aligned data).
The descriptions of the bus_space functions given below all assume that they are called with proper arguments. If called with invalid argu-
ments or arguments that are out of range (e.g., trying to access data outside of the region mapped when a given handle was created), unde-
fined behaviour results. In that case, they may cause the system to halt, either intentionally (via panic) or unintentionally (by causing a
fatal trap or by some other means) or may cause improper operation which is not immediately fatal. Functions which return void or which
return data read from bus space (i.e., functions which don't obviously return an error code) do not fail. They could only fail if given
invalid arguments, and in that case their behaviour is undefined. Functions which take a count of bytes have undefined results if the speci-
fied count is zero.
TYPES
Several types are defined in <machine/bus_defs.h> to facilitate use of the bus_space functions by drivers.
bus_addr_t
The bus_addr_t type is used to describe bus addresses. It must be an unsigned integral type capable of holding the largest bus address
usable by the architecture. This type is primarily used when mapping and unmapping bus space.
bus_size_t
The bus_size_t type is used to describe sizes of ranges in bus space. It must be an unsigned integral type capable of holding the size of
the largest bus address range usable on the architecture. This type is used by virtually all of the bus_space functions, describing sizes
when mapping regions and offsets into regions when performing space access operations.
bus_space_tag_t
The bus_space_tag_t type is used to describe a particular bus space on a machine. Its contents are machine-dependent and should be consid-
ered opaque by machine-independent code. This type is used by all bus_space functions to name the space on which they're operating.
bus_space_handle_t
The bus_space_handle_t type is used to describe a mapping of a range of bus space. Its contents are machine-dependent and should be consid-
ered opaque by machine-independent code. This type is used when performing bus space access operations.
bus_space_reservation_t
The bus_space_reservation_t type is used to describe a range of bus space. It logically consists of a bus_addr_t, the first address in the
range, and a bus_size_t, the length in bytes of the range. Machine-independent code creates and interrogates a bus_space_reservation_t using
a constructor, bus_space_reservation_init(), and accessor functions, bus_space_reservation_addr() and bus_space_reservation_size().
COMPARING BUS SPACE TAGS
To check whether or not one bus_space_tag_t refers to the same space as another in machine-independent code, do not use either memcmp(9) or
the C equals (==) operator. Use bus_space_is_equal(), instead.
MAPPING AND UNMAPPING BUS SPACE
Bus space must be mapped before it can be used, and should be unmapped when it is no longer needed. The bus_space_map(),
bus_space_reservation_map(), bus_space_reservation_unmap(), and bus_space_unmap() functions provide these capabilities.
Some drivers need to be able to pass a subregion of already-mapped bus space to another driver or module within a driver. The
bus_space_subregion() function allows such subregions to be created.
bus_space_map(space, address, size, flags, handlep)
The bus_space_map() function exclusively reserves and maps the region of bus space named by the space, address, and size arguments. If suc-
cessful, it returns zero and fills in the bus space handle pointed to by handlep with the handle that can be used to access the mapped
region. If unsuccessful, it will return non-zero and leave the bus space handle pointed to by handlep in an undefined state.
The flags argument controls how the space is to be mapped. Supported flags include:
BUS_SPACE_MAP_CACHEABLE Try to map the space so that accesses can be cached by the system cache. If this flag is not specified, the
implementation should map the space so that it will not be cached. This mapping method will only be useful in
very rare occasions.
This flag must have a value of 1 on all implementations for backward compatibility.
BUS_SPACE_MAP_PREFETCHABLE
Try to map the space so that accesses can be prefetched by the system, and writes can be buffered. This
means, accesses should be side effect free (idempotent). The bus_space_barrier() methods will flush the write
buffer or force actual read accesses. If this flag is not specified, the implementation should map the space
so that it will not be prefetched or delayed.
BUS_SPACE_MAP_LINEAR Try to map the space so that its contents can be accessed linearly via normal memory access methods (e.g.,
pointer dereferencing and structure accesses). The bus_space_vaddr() method can be used to obtain the kernel
virtual address of the mapped range. This is useful when software wants to do direct access to a memory
device, e.g., a frame buffer. If this flag is specified and linear mapping is not possible, the
bus_space_map() call should fail. If this flag is not specified, the system may map the space in whatever way
is most convenient. Use of this mapping method is not encouraged for normal device access; where linear
access is not essential, use of the bus_space_read/write() methods is strongly recommended.
Not all combinations of flags make sense or are supported with all spaces. For instance, BUS_SPACE_MAP_CACHEABLE may be meaningless when
used on many systems' I/O port spaces, and on some systems BUS_SPACE_MAP_LINEAR without BUS_SPACE_MAP_PREFETCHABLE may never work. When the
system hardware or firmware provides hints as to how spaces should be mapped (e.g., the PCI memory mapping registers' "prefetchable" bit),
those hints should be followed for maximum compatibility. On some systems, requesting a mapping that cannot be satisfied (e.g., requesting a
non-prefetchable mapping when the system can only provide a prefetchable one) will cause the request to fail.
Some implementations may keep track of use of bus space for some or all bus spaces and refuse to allow duplicate allocations. This is
encouraged for bus spaces which have no notion of slot-specific space addressing, such as ISA and VME, and for spaces which coexist with
those spaces (e.g., EISA and PCI memory and I/O spaces co-existing with ISA memory and I/O spaces).
Mapped regions may contain areas for which there is no device on the bus. If space in those areas is accessed, the results are bus-depen-
dent.
bus_space_reservation_map(space, bsr, flags, handlep)
The bus_space_reservation_map() function is similar to bus_space_map() but it maps a region of bus space that was previously reserved by a
call to bus_space_reserve() or bus_space_reserve_subregion(). The region is given by the space and bsr arguments. If successful, it returns
zero and fills in the bus space handle pointed to by handlep with the handle that can be used to access the mapped region. If unsuccessful,
it will return non-zero and leave the bus space handle pointed to by handlep in an undefined state.
A region mapped by bus_space_reservation_map() may only be unmapped by a call to bus_space_reservation_unmap().
For more details, see the description of bus_space_map().
bus_space_unmap(space, handle, size)
The bus_space_unmap() function unmaps and relinquishes a region of bus space reserved and mapped with bus_space_map(). When unmapping a
region, the size specified should be the same as the size given to bus_space_map() when mapping that region.
After bus_space_unmap() is called on a handle, that handle is no longer valid. (If copies were made of the handle they are no longer valid,
either.)
This function will never fail. If it would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, bus_space_unmap() will never return.
bus_space_reservation_unmap(space, handle, size)
The bus_space_reservation_unmap() function is similar to bus_space_unmap() but it should be called on handles mapped by
bus_space_reservation_map() and only on such handles. Unlike bus_space_unmap(), bus_space_reservation_unmap() does not relinquish exclusive
use of the bus space named by handle and size; that is the job of bus_space_release().
bus_space_subregion(space, handle, offset, size, nhandlep)
The bus_space_subregion() function is a convenience function which makes a new handle to some subregion of an already-mapped region of bus
space. The subregion described by the new handle starts at byte offset offset into the region described by handle, with the size given by
size, and must be wholly contained within the original region.
If successful, bus_space_subregion() returns zero and fills in the bus space handle pointed to by nhandlep. If unsuccessful, it returns non-
zero and leaves the bus space handle pointed to by nhandlep in an undefined state. In either case, the handle described by handle remains
valid and is unmodified.
When done with a handle created by bus_space_subregion(), the handle should be thrown away. Under no circumstances should bus_space_unmap()
be used on the handle. Doing so may confuse any resource management being done on the space, and will result in undefined behaviour. When
bus_space_unmap() or bus_space_free() is called on a handle, all subregions of that handle become invalid.
bus_space_vaddr(tag, handle)
This method returns the kernel virtual address of a mapped bus space if and only if it was mapped with the BUS_SPACE_MAP_LINEAR flag. The
range can be accessed by normal (volatile) pointer dereferences. If mapped with the BUS_SPACE_MAP_PREFETCHABLE flag, the bus_space_barrier()
method must be used to force a particular access order.
bus_space_mmap(tag, addr, off, prot, flags)
This method is used to provide support for memory mapping bus space into user applications. If an address space is addressable via volatile
pointer dereferences, bus_space_mmap() will return the physical address (possibly encoded as a machine-dependent cookie) of the bus space
indicated by addr and off. addr is the base address of the device or device region, and off is the offset into that region that is being
requested. If the request is made with BUS_SPACE_MAP_LINEAR as a flag, then a linear region must be returned to the caller. If the region
cannot be mapped (either the address does not exist, or the constraints can not be met), bus_space_mmap() returns -1 to indicate failure.
Note that it is not necessary that the region being requested by a bus_space_mmap() call be mapped into a bus_space_handle_t.
bus_space_mmap() is called once per PAGE_SIZE page in the range. The prot argument indicates the memory protection requested by the user
application for the range.
bus_space_handle_is_equal(space, handle1, handle2)
Use bus_space_handle_is_equal() to check whether or not handle1 and handle2 refer to regions starting at the same address in the bus space
space.
ALLOCATING AND FREEING BUS SPACE
Some devices require or allow bus space to be allocated by the operating system for device use. When the devices no longer need the space,
the operating system should free it for use by other devices. The bus_space_alloc(), bus_space_free(), bus_space_reserve(),
bus_space_reserve_subregion(), and bus_space_release() functions provide these capabilities. The functions bus_space_reserve(),
bus_space_reserve_subregion(), and bus_space_release() are not yet available on all architectures.
bus_space_alloc(space, reg_start, reg_end, size, alignment, boundary, flags, addrp, handlep)
The bus_space_alloc() function allocates and maps a region of bus space with the size given by size, corresponding to the given constraints.
If successful, it returns zero, fills in the bus address pointed to by addrp with the bus space address of the allocated region, and fills in
the bus space handle pointed to by handlep with the handle that can be used to access that region. If unsuccessful, it returns non-zero and
leaves the bus address pointed to by addrp and the bus space handle pointed to by handlep in an undefined state.
Constraints on the allocation are given by the reg_start, reg_end, alignment, and boundary parameters. The allocated region will start at or
after reg_start and end before or at reg_end. The alignment constraint must be a power of two, and the allocated region will start at an
address that is an even multiple of that power of two. The boundary constraint, if non-zero, ensures that the region is allocated so that
first address in region / boundary has the same value as last address in region / boundary. If the constraints cannot be met,
bus_space_alloc() will fail. It is an error to specify a set of constraints that can never be met (for example, size greater than boundary).
The flags parameter is the same as the like-named parameter to bus_space_map, the same flag values should be used, and they have the same
meanings.
Handles created by bus_space_alloc() should only be freed with bus_space_free(). Trying to use bus_space_unmap() on them causes undefined
behaviour. The bus_space_subregion() function can be used on handles created by bus_space_alloc().
bus_space_reserve(t, bpa, size, flags, bsrp)
The bus_space_reserve() function reserves, for the caller's exclusive use, size bytes starting at the address bpa in the space referenced by
t.
bus_space_reserve() does not map the space. The caller should use bus_space_reservation_map() to map the reservation. flags contains a hint
how the caller may map the reservation, later. Whenever possible, callers should pass the same flags to bus_space_reserve() as they will
pass to bus_space_reservation_map() to map the reservation.
On success, bus_space_reserve() records the reservation at bsrp and returns 0. On failure, bsrp is undefined, and bus_space_reserve()
returns a non-zero error code. Possible error codes include
EOPNOTSUPP bus_space_reserve() is not supported on this architecture, or flags was incompatible with the bus space represented by t.
ENOMEM There was not sufficient bus space at bpa to satisfy the request.
bus_space_reserve_subregion(t, reg_start, reg_end, size, alignment, boundary, flags, bsrp)
The bus_space_reserve_subregion() function reserves, for the caller's exclusive use, size bytes in the space referenced by t. The parameters
reg_start, reg_end, alignment, boundary, and flags each work alike to the bus_space_alloc() parameters of the same names.
On success, bus_space_reserve_subregion() records the reservation at bsrp and returns 0. On failure, bsrp is undefined, and
bus_space_reserve_subregion() returns a non-zero error code. Possible error codes include
EOPNOTSUPP bus_space_reserve() is not supported on this architecture, or flags was incompatible with the bus space represented by t.
ENOMEM There was not sufficient bus space at bpa to satisfy the request.
bus_space_release(t, bsr)
The bus_space_release() function releases the bus space bsr in t that was previously reserved by bus_space_reserve() or
bus_space_reserve_subregion().
If bus_space_release() is called on a reservation that has been mapped by bus_space_reservation_map() without subsequently being unmapped,
the behavior of the system is undefined.
bus_space_free(space, handle, size)
The bus_space_free() function unmaps and frees a region of bus space mapped and allocated with bus_space_alloc(). When unmapping a region,
the size specified should be the same as the size given to bus_space_alloc() when allocating the region.
After bus_space_free() is called on a handle, that handle is no longer valid. (If copies were made of the handle, they are no longer valid,
either.)
This function will never fail. If it would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, bus_space_free() will never return.
READING AND WRITING SINGLE DATA ITEMS
The simplest way to access bus space is to read or write a single data item. The bus_space_read_N() and bus_space_write_N() families of
functions provide the ability to read and write 1, 2, 4, and 8 byte data items on busses which support those access sizes.
bus_space_read_1(space, handle, offset)
bus_space_read_2(space, handle, offset)
bus_space_read_4(space, handle, offset)
bus_space_read_8(space, handle, offset)
The bus_space_read_N() family of functions reads a 1, 2, 4, or 8 byte data item from the offset specified by offset into the region specified
by handle of the bus space specified by space. The location being read must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle plus the offset should be a multiple of the size of data item being
read. On some systems, not obeying this requirement may cause incorrect data to be read, on others it may cause a system crash.
Read operations done by the bus_space_read_N() functions may be executed out of order with respect to other pending read and write operations
unless order is enforced by use of the bus_space_barrier() function.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_write_1(space, handle, offset, value)
bus_space_write_2(space, handle, offset, value)
bus_space_write_4(space, handle, offset, value)
bus_space_write_8(space, handle, offset, value)
The bus_space_write_N() family of functions writes a 1, 2, 4, or 8 byte data item to the offset specified by offset into the region specified
by handle of the bus space specified by space. The location being written must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle plus the offset should be a multiple of the size of data item being
written. On some systems, not obeying this requirement may cause incorrect data to be written, on others it may cause a system crash.
Write operations done by the bus_space_write_N() functions may be executed out of order with respect to other pending read and write opera-
tions unless order is enforced by use of the bus_space_barrier() function.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
PROBING BUS SPACE FOR HARDWARE WHICH MAY NOT RESPOND
One problem with the bus_space_read_N() and bus_space_write_N() family of functions is that they provide no protection against exceptions
which can occur when no physical hardware or device responds to the read or write cycles. In such a situation, the system typically would
panic due to a kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family of functions provide a mechanism to handle these
exceptions gracefully without the risk of crashing the system.
As with bus_space_read_N() and bus_space_write_N(), the peek and poke functions provide the ability to read and write 1, 2, 4, and 8 byte
data items on busses which support those access sizes. All of the constraints specified in the descriptions of the bus_space_read_N() and
bus_space_write_N() functions also apply to bus_space_peek_N() and bus_space_poke_N().
In addition, explicit calls to the bus_space_barrier() function are not required as the implementation will ensure all pending operations
complete before the peek or poke operation starts. The implementation will also ensure that the peek or poke operations complete before
returning.
The return value indicates the outcome of the peek or poke operation. A return value of zero implies that a hardware device is responding to
the operation at the specified offset in the bus space. A non-zero return value indicates that the kernel intercepted a hardware exception
(e.g., bus error) when the peek or poke operation was attempted. Note that some busses are incapable of generating exceptions when non-exis-
tent hardware is accessed. In such cases, these functions will always return zero and the value of the data read by bus_space_peek_N() will
be unspecified.
Finally, it should be noted that at this time the bus_space_peek_N() and bus_space_poke_N() functions are not re-entrant and should not,
therefore, be used from within an interrupt service routine. This constraint may be removed at some point in the future.
bus_space_peek_1(space, handle, offset, datap)
bus_space_peek_2(space, handle, offset, datap)
bus_space_peek_4(space, handle, offset, datap)
bus_space_peek_8(space, handle, offset, datap)
The bus_space_peek_N() family of functions cautiously read a 1, 2, 4, or 8 byte data item from the offset specified by offset in the region
specified by handle of the bus space specified by space. The data item read is stored in the location pointed to by datap. It is permissi-
ble for datap to be NULL, in which case the data item will be discarded after being read.
bus_space_poke_1(space, handle, offset, value)
bus_space_poke_2(space, handle, offset, value)
bus_space_poke_4(space, handle, offset, value)
bus_space_poke_8(space, handle, offset, value)
The bus_space_poke_N() family of functions cautiously write a 1, 2, 4, or 8 byte data item specified by value to the offset specified by
offset in the region specified by handle of the bus space specified by space.
BARRIERS
In order to allow high-performance buffering implementations to avoid bus activity on every operation, read and write ordering should be
specified explicitly by drivers when necessary. The bus_space_barrier() function provides that ability.
bus_space_barrier(space, handle, offset, length, flags)
The bus_space_barrier() function enforces ordering of bus space read and write operations for the specified subregion (described by the
offset and length parameters) of the region named by handle in the space named by space.
The flags argument controls what types of operations are to be ordered. Supported flags are:
BUS_SPACE_BARRIER_READ_BEFORE_READ Force all reads before the barrier to complete before any reads after the barrier may be issued.
BUS_SPACE_BARRIER_READ_BEFORE_WRITE Force all reads before the barrier to complete before any writes after the barrier may be issued.
BUS_SPACE_BARRIER_WRITE_BEFORE_READ Force all writes before the barrier to complete before any reads after the barrier may be issued.
BUS_SPACE_BARRIER_WRITE_BEFORE_WRITE Force all writes before the barrier to complete before any writes after the barrier may be
issued.
BUS_SPACE_BARRIER_SYNC Force all memory operations and any pending exceptions to be completed before any instructions
after the barrier may be issued.
Those flags can be combined (or-ed together) to enforce ordering on different combinations of read and write operations.
All of the specified type(s) of operation which are done to the region before the barrier operation are guaranteed to complete before any of
the specified type(s) of operation done after the barrier.
Example: Consider a hypothetical device with two single-byte ports, one write-only input port (at offset 0) and a read-only output port (at
offset 1). Operation of the device is as follows: data bytes are written to the input port, and are placed by the device on a stack, the top
of which is read by reading from the output port. The sequence to correctly write two data bytes to the device then read those two data
bytes back would be:
/*
* t and h are the tag and handle for the mapped device's
* space.
*/
bus_space_write_1(t, h, 0, data0);
bus_space_barrier(t, h, 0, 1, BUS_SPACE_BARRIER_WRITE_BEFORE_WRITE); /* 1 */
bus_space_write_1(t, h, 0, data1);
bus_space_barrier(t, h, 0, 2, BUS_SPACE_BARRIER_WRITE_BEFORE_READ); /* 2 */
ndata1 = bus_space_read_1(t, h, 1);
bus_space_barrier(t, h, 1, 1, BUS_SPACE_BARRIER_READ_BEFORE_READ); /* 3 */
ndata0 = bus_space_read_1(t, h, 1);
/* data0 == ndata0, data1 == ndata1 */
The first barrier makes sure that the first write finishes before the second write is issued, so that two writes to the input port are done
in order and are not collapsed into a single write. This ensures that the data bytes are written to the device correctly and in order.
The second barrier forces the writes to the output port finish before any of the reads to the input port are issued, thereby making sure that
all of the writes are finished before data is read. This ensures that the first byte read from the device really is the last one that was
written.
The third barrier makes sure that the first read finishes before the second read is issued, ensuring that data is read correctly and in
order.
The barriers in the example above are specified to cover the absolute minimum number of bus space locations. It is correct (and often eas-
ier) to make barrier operations cover the device's whole range of bus space, that is, to specify an offset of zero and the size of the whole
region.
The following barrier operations are obsolete and should be removed from existing code:
BUS_SPACE_BARRIER_READ Synchronize read operations.
BUS_SPACE_BARRIER_WRITE Synchronize write operations.
REGION OPERATIONS
Some devices use buffers which are mapped as regions in bus space. Often, drivers want to copy the contents of those buffers to or from mem-
ory, e.g., into mbufs which can be passed to higher levels of the system or from mbufs to be output to a network. In order to allow drivers
to do this as efficiently as possible, the bus_space_read_region_N() and bus_space_write_region_N() families of functions are provided.
Drivers occasionally need to copy one region of a bus space to another, or to set all locations in a region of bus space to contain a single
value. The bus_space_copy_region_N() family of functions and the bus_space_set_region_N() family of functions allow drivers to perform these
operations.
bus_space_read_region_1(space, handle, offset, datap, count)
bus_space_read_region_2(space, handle, offset, datap, count)
bus_space_read_region_4(space, handle, offset, datap, count)
bus_space_read_region_8(space, handle, offset, datap, count)
The bus_space_read_region_N() family of functions reads count 1, 2, 4, or 8 byte data items from bus space starting at byte offset offset in
the region specified by handle of the bus space specified by space and writes them into the array specified by datap. Each successive data
item is read from an offset 1, 2, 4, or 8 bytes after the previous data item (depending on which function is used). All locations being read
must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle plus the offset should be a multiple of the size of data items being
read and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to be
read, on others it may cause a system crash.
Read operations done by the bus_space_read_region_N() functions may be executed in any order. They may also be executed out of order with
respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier() function. There is no way to
insert barriers between reads of individual bus space locations executed by the bus_space_read_region_N() functions.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_write_region_1(space, handle, offset, datap, count)
bus_space_write_region_2(space, handle, offset, datap, count)
bus_space_write_region_4(space, handle, offset, datap, count)
bus_space_write_region_8(space, handle, offset, datap, count)
The bus_space_write_region_N() family of functions reads count 1, 2, 4, or 8 byte data items from the array specified by datap and writes
them to bus space starting at byte offset offset in the region specified by handle of the bus space specified by space. Each successive data
item is written to an offset 1, 2, 4, or 8 bytes after the previous data item (depending on which function is used). All locations being
written must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle plus the offset should be a multiple of the size of data items being
written and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to
be written, on others it may cause a system crash.
Write operations done by the bus_space_write_region_N() functions may be executed in any order. They may also be executed out of order with
respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier() function. There is no way to
insert barriers between writes of individual bus space locations executed by the bus_space_write_region_N() functions.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_copy_region_1(space, srchandle, srcoffset, dsthandle, dstoffset, count)
bus_space_copy_region_2(space, srchandle, srcoffset, dsthandle, dstoffset, count)
bus_space_copy_region_4(space, srchandle, srcoffset, dsthandle, dstoffset, count)
bus_space_copy_region_8(space, srchandle, srcoffset, dsthandle, dstoffset, count)
The bus_space_copy_region_N() family of functions copies count 1, 2, 4, or 8 byte data items in bus space from the area starting at byte off-
set srcoffset in the region specified by srchandle of the bus space specified by space to the area starting at byte offset dstoffset in the
region specified by dsthandle in the same bus space. Each successive data item read or written has an offset 1, 2, 4, or 8 bytes after the
previous data item (depending on which function is used). All locations being read and written must lie within the bus space region speci-
fied by their respective handles.
For portability, the starting addresses of the regions specified by each handle plus its respective offset should be a multiple of the size
of data items being copied. On some systems, not obeying this requirement may cause incorrect data to be copied, on others it may cause a
system crash.
Read and write operations done by the bus_space_copy_region_N() functions may be executed in any order. They may also be executed out of
order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier(function). There is
no way to insert barriers between reads or writes of individual bus space locations executed by the bus_space_copy_region_N() functions.
Overlapping copies between different subregions of a single region of bus space are handled correctly by the bus_space_copy_region_N() func-
tions.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_set_region_1(space, handle, offset, value, count)
bus_space_set_region_2(space, handle, offset, value, count)
bus_space_set_region_4(space, handle, offset, value, count)
bus_space_set_region_8(space, handle, offset, value, count)
The bus_space_set_region_N() family of functions writes the given value to count 1, 2, 4, or 8 byte data items in bus space starting at byte
offset offset in the region specified by handle of the bus space specified by space. Each successive data item has an offset 1, 2, 4, or 8
bytes after the previous data item (depending on which function is used). All locations being written must lie within the bus space region
specified by handle.
For portability, the starting address of the region specified by handle plus the offset should be a multiple of the size of data items being
written. On some systems, not obeying this requirement may cause incorrect data to be written, on others it may cause a system crash.
Write operations done by the bus_space_set_region_N() functions may be executed in any order. They may also be executed out of order with
respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier() function. There is no way to
insert barriers between writes of individual bus space locations executed by the bus_space_set_region_N() functions.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
READING AND WRITING A SINGLE LOCATION MULTIPLE TIMES
Some devices implement single locations in bus space which are to be read or written multiple times to communicate data, e.g., some ethernet
devices' packet buffer FIFOs. In order to allow drivers to manipulate these types of devices as efficiently as possible, the
bus_space_read_multi_N() and bus_space_write_multi_N() families of functions are provided.
bus_space_read_multi_1(space, handle, offset, datap, count)
bus_space_read_multi_2(space, handle, offset, datap, count)
bus_space_read_multi_4(space, handle, offset, datap, count)
bus_space_read_multi_8(space, handle, offset, datap, count)
The bus_space_read_multi_N() family of functions reads count 1, 2, 4, or 8 byte data items from bus space at byte offset offset in the region
specified by handle of the bus space specified by space and writes them into the array specified by datap. Each successive data item is read
from the same location in bus space. The location being read must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle plus the offset should be a multiple of the size of data items being
read and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to be
read, on others it may cause a system crash.
Read operations done by the bus_space_read_multi_N() functions may be executed out of order with respect to other pending read and write
operations unless order is enforced by use of the bus_space_barrier() function. Because the bus_space_read_multi_N() functions read the same
bus space location multiple times, they place an implicit read barrier between each successive read of that bus space location.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_write_multi_1(space, handle, offset, datap, count)
bus_space_write_multi_2(space, handle, offset, datap, count)
bus_space_write_multi_4(space, handle, offset, datap, count)
bus_space_write_multi_8(space, handle, offset, datap, count)
The bus_space_write_multi_N() family of functions reads count 1, 2, 4, or 8 byte data items from the array specified by datap and writes them
into bus space at byte offset offset in the region specified by handle of the bus space specified by space. Each successive data item is
written to the same location in bus space. The location being written must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle plus the offset should be a multiple of the size of data items being
written and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to
be written, on others it may cause a system crash.
Write operations done by the bus_space_write_multi_N() functions may be executed out of order with respect to other pending read and write
operations unless order is enforced by use of the bus_space_barrier() function. Because the bus_space_write_multi_N() functions write the
same bus space location multiple times, they place an implicit write barrier between each successive write of that bus space location.
These functions will never fail. If they would fail (e.g., because of an argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
STREAM FUNCTIONS
Most of the bus_space functions imply a host byte-order and a bus byte-order and take care of any translation for the caller. In some cases,
however, hardware may map a FIFO or some other memory region for which the caller may want to use multi-word, yet untranslated access.
Access to these types of memory regions should be with the bus_space_*_stream_N() functions.
bus_space_read_stream_1(space, handle, offset)
bus_space_read_stream_2(space, handle, offset)
bus_space_read_stream_4(space, handle, offset)
bus_space_read_stream_8(space, handle, offset)
bus_space_read_multi_stream_1(space, handle, offset, datap, count)
bus_space_read_multi_stream_2(space, handle, offset, datap, count)
bus_space_read_multi_stream_4(space, handle, offset, datap, count)
bus_space_read_multi_stream_8(space, handle, offset, datap, count)
bus_space_read_region_stream_1(space, handle, offset, datap, count)
bus_space_read_region_stream_2(space, handle, offset, datap, count)
bus_space_read_region_stream_4(space, handle, offset, datap, count)
bus_space_read_region_stream_8(space, handle, offset, datap, count)
bus_space_write_stream_1(space, handle, offset, value)
bus_space_write_stream_2(space, handle, offset, value)
bus_space_write_stream_4(space, handle, offset, value)
bus_space_write_stream_8(space, handle, offset, value)
bus_space_write_multi_stream_1(space, handle, offset, datap, count)
bus_space_write_multi_stream_2(space, handle, offset, datap, count)
bus_space_write_multi_stream_4(space, handle, offset, datap, count)
bus_space_write_multi_stream_8(space, handle, offset, datap, count)
bus_space_write_region_stream_1(space, handle, offset, datap, count)
bus_space_write_region_stream_2(space, handle, offset, datap, count)
bus_space_write_region_stream_4(space, handle, offset, datap, count)
bus_space_write_region_stream_8(space, handle, offset, datap, count)
These functions are defined just as their non-stream counterparts, except that they provide no byte-order translation.
IMPLEMENTING BUS SPACES IN MACHINE-INDEPENDENT CODE
bus_space_tag_create(obst, present, extpresent, ov, ctx, bstp)
Create a copy of the tag obst at *bstp. Except for the behavior overridden by ov, *bstp inherits the behavior of obst under bus_space calls.
ov contains function pointers corresponding to bus_space routines. Each function pointer has a corresponding bit in present or extpresent,
and if that bit is 1, the function pointer overrides the corresponding bus_space call for the new tag. Any combination of these bits may be
set in present:
BUS_SPACE_OVERRIDE_MAP
BUS_SPACE_OVERRIDE_UNMAP
BUS_SPACE_OVERRIDE_ALLOC
BUS_SPACE_OVERRIDE_FREE
BUS_SPACE_OVERRIDE_RESERVE
BUS_SPACE_OVERRIDE_RELEASE
BUS_SPACE_OVERRIDE_RESERVATION_MAP
BUS_SPACE_OVERRIDE_RESERVATION_UNMAP
BUS_SPACE_OVERRIDE_RESERVE_SUBREGION
bus_space_tag_create() does not copy ov. After a new tag is created by bus_space_tag_create(), ov must not be destroyed until after the tag
is destroyed by bus_space_tag_destroy().
The first argument of every override-function is a void *, and ctx is passed in that argument.
Return 0 if the call succeeds. Return EOPNOTSUPP if the architecture does not support overrides. Return EINVAL if present is 0, if ov is
NULL, or if present indicates that an override is present, but the corresponding override in ov is NULL.
If the call does not succeed, *bstp is undefined.
bus_space_tag_destroy(bst)
Destroy a tag, bst, created by a prior call to bus_space_tag_create(). If bst was not created by bus_space_tag_create(), results are unde-
fined. If bst was already destroyed, results are undefined.
EXPECTED CHANGES TO THE BUS_SPACE FUNCTIONS
The definition of the bus_space functions should not yet be considered finalized. There are several changes and improvements which should be
explored, including:
o Providing a mechanism by which incorrectly-written drivers will be automatically given barriers and properly-written drivers won't be
forced to use more barriers than they need. This should probably be done via a #define in the incorrectly-written drivers. Unfortu-
nately, at this time, few drivers actually use barriers correctly (or at all). Because of that, bus_space implementations on architec-
tures which do buffering must always do the barriers inside the bus_space calls, to be safe. That has a potentially significant perfor-
mance impact.
o Exporting the bus_space functions to user-land so that applications (such as X servers) have easier, more portable access to device
space.
o Redefining bus space tags and handles so that machine-independent bus interface drivers (for example PCI to VME bridges) could define and
implement bus spaces without requiring machine-dependent code. If this is done, it should be done in such a way that machine-dependent
optimizations should remain possible.
o Converting bus spaces (such as PCI configuration space) which currently use space-specific access methods to use the bus_space functions
where that is appropriate.
o Redefining the way bus space is mapped and allocated, so that mapping and allocation are done with bus specific functions which return
bus space tags. This would allow further optimization than is currently possible, and would also ease translation of the bus_space func-
tions into user space (since mapping in user space would look like it just used a different bus-specific mapping function).
COMPATIBILITY
The current version of the bus_space interface specification differs slightly from the original specification that came into wide use. A few
of the function names and arguments have changed for consistency and increased functionality. Drivers that were written to the old, depre-
cated specification can be compiled by defining the __BUS_SPACE_COMPAT_OLDDEFS preprocessor symbol before including <sys/bus.h>.
SEE ALSO
bus_dma(9), mb(9)
HISTORY
The bus_space functions were introduced in a different form (memory and I/O spaces were accessed via different sets of functions) in
NetBSD 1.2. The functions were merged to work on generic ``spaces'' early in the NetBSD 1.3 development cycle, and many drivers were con-
verted to use them. This document was written later during the NetBSD 1.3 development cycle and the specification was updated to fix some
consistency problems and to add some missing functionality.
AUTHORS
The bus_space interfaces were designed and implemented by the NetBSD developer community. Primary contributors and implementors were Chris
Demetriou, Jason Thorpe, and Charles Hannum, but the rest of the NetBSD developers and the user community played a significant role in devel-
opment.
Chris Demetriou wrote this manual page.
BSD
July 6, 2011 BSD