vga_settextmoderegs(3) [osf1 man page]

vga_gettextmoderegs(3)						Svgalib User Manual					    vga_gettextmoderegs(3)

NAME

       vga_gettextmoderegs, vga_settextmoderegs - get/set the vga state used in text mode

SYNOPSIS

       #include <vga.h>

       void vga_gettextmoderegs(void *state);
       void vga_settextmoderegs(void *state);

DESCRIPTION

       The functions gives access to the buffer where svgalib saves the vga state which is use when the kernel displays text on the SVGA.  This is
       used by the restoretextmode(1), savetextmode(1), and textmode(1) utilities to restore a possibly screwed console.

       The buffer currently occupies 385 bytes. It can't do any harm to make it substantially larger to allow for future enhancements.

SEE ALSO

       svgalib(7),   vgagl(7),	 libvga.config(5),   restorefont(1),   restoretextmode(1),   restorepalette(1),   savetextmode(1),    textmode(1),
       vga_dumpregs(3), vga_gettextfont(3), dumpreg(1)

AUTHOR

       This manual page was edited by Michael Weller <eowmob@exp-math.uni-essen.de>. The exact source of the referenced function as well as of the
       original documentation is unknown.

       It is very likely that both are at least to some extent are due to Harm Hanemaayer <H.Hanemaayer@inter.nl.net>.

       Occasionally this might be wrong. I hereby asked to be excused by the original author and will happily accept any additions or  corrections
       to this first version of the svgalib manual.

Svgalib (>;= 1.2.11)						   27 July 1997 					    vga_gettextmoderegs(3)

restoretextmode(1)						Svgalib User Manual						restoretextmode(1)

NAME

       restoretextmode - save or restore the SVGA registers for textmode.

SYNOPSIS

       restoretextmode {-r|-w} filename

DESCRIPTION

       The state of the SVGA is written to or restored from filename using the vga_gettextmoderegs(3) and vga_settextmoderegs(3) functions.

       As of this writing this file is 385 bytes long but this might change with future versions.

       Please  do  not	fiddle with the contents of the file except when you know what you do. It might even result in hardware damage. Because of
       that, you should think twice to make this command available to all users on your system.

       The purpose of this program is usually to recover from a crashed console due to an svgalib, Xfree or other  program  bug.  First  save  the
       state  of  the  SVGA card when on a text console. After the crash restore this state. The savetextmode(1) and textmode(1) script makes this
       procedure very easy.

OPTIONS

       -w filename
	      write the SVGA state to the file filename.

       -r filename
	      restore the SVGA state from the file filename.

SEE ALSO

       svgalib(7), vgagl(7), libvga.config(5), vga_gettextmoderegs(3), vga_settextmoderegs(3),	dumpreg(1),  convfont(1),  fix132x43(1),  restore-
       font(1), restorepalette(1), runx(1), savetextmode(1), setmclk(1), textmode(1).

AUTHOR

       This  manual page was edited by Michael Weller <eowmob@exp-math.uni-essen.de>. The exact source of the referenced utility as well as of the
       original documentation is unknown.

       It is very likely that both are at least to some extent are due to Harm Hanemaayer <H.Hanemaayer@inter.nl.net>.

       Occasionally this might be wrong. I hereby asked to be excused by the original author and will happily accept any additions or  corrections
       to this first version of the svgalib manual.

Svgalib (>;= 1.2.11)						    2 Aug 1997							restoretextmode(1)