umodem(4) [php man page]

UMODEM(4)						   BSD Kernel Interfaces Manual 						 UMODEM(4)

NAME

     umodem -- USB modem support

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device umodem
	   device ucom

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   umodem_load="YES"

DESCRIPTION

     The umodem driver provides support for USB modems in the Communication Device Class using the Abstract Control Model.  These modems are basi-
     cally standard serial line modems, but they are accessed via USB instead.	They support a regular AT command set.	The commands can either be
     multiplexed with the data stream or handled through separate pipes.  In the latter case the AT commands have to be given on a device separate
     from the data device.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     Devices supported by the umodem driver include:

     o	 3Com 5605
     o	 Curitel PC5740 Wireless Modem
     o	 Kyocera AH-K3001V Mobile Phone(WILLCOM)
     o	 Kyocera WX320K Mobile Phone(WILLCOM)
     o	 Metricom Ricochet GS USB wireless modem
     o	 Sierra MC5720 Wireless Modem
     o	 Yamaha Broadband Wireless Router RTW65b
     o	 ELSA MicroLink 56k USB modem
     o	 Sony Ericsson W810i phone

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The umodem driver appeared in NetBSD 1.5.	This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

BUGS

     Only modems with multiplexed commands and data are supported at the moment.

BSD
								 November 22, 2006							       BSD

UMODEM(4)						   BSD Kernel Interfaces Manual 						 UMODEM(4)

NAME

     umodem -- USB modem support

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device umodem
	   device ucom

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   umodem_load="YES"

DESCRIPTION

     The umodem driver provides support for USB modems in the Communication Device Class using the Abstract Control Model.  These modems are basi-
     cally standard serial line modems, but they are accessed via USB instead.	They support a regular AT command set.	The commands can either be
     multiplexed with the data stream or handled through separate pipes.  In the latter case the AT commands have to be given on a device separate
     from the data device.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     Devices supported by the umodem driver include:

     o	 3Com 5605
     o	 Curitel PC5740 Wireless Modem
     o	 Kyocera AH-K3001V Mobile Phone(WILLCOM)
     o	 Kyocera WX320K Mobile Phone(WILLCOM)
     o	 Metricom Ricochet GS USB wireless modem
     o	 Sierra MC5720 Wireless Modem
     o	 Yamaha Broadband Wireless Router RTW65b
     o	 ELSA MicroLink 56k USB modem
     o	 Sony Ericsson W810i phone

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The umodem driver appeared in NetBSD 1.5.	This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

BUGS

     Only modems with multiplexed commands and data are supported at the moment.

BSD
								 November 22, 2006							       BSD