VICTRONUPS(8) NUT Manual VICTRONUPS(8)NAME
victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
NOTE
This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the
NetUps line.
The Match Lite line may only report a handful of variables. This is usually not a bug - they just don't support anything else.
CABLING
If your Victron cable is broken or missing, use this diagram to build a clone:
docs/cables/victron.txt
EXTRA ARGUMENTS
This driver supports the following optional setting in the ups.conf(5):
modelname=name
Set model name
usd=delay
Set delay before shutdown on UPS
BUGS
The protocol for this UPS is not officially documented.
AUTHOR
Radek Benedikt <benedikt@lphard.cz>, Daniel Prynych <Daniel.Prynych@hornet.cz>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 VICTRONUPS(8)
Check Out this Related Man Page
VICTRONUPS(8) NUT Manual VICTRONUPS(8)NAME
victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
NOTE
This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the
NetUps line.
The Match Lite line may only report a handful of variables. This is usually not a bug - they just don't support anything else.
CABLING
If your Victron cable is broken or missing, use this diagram to build a clone:
docs/cables/victron.txt
EXTRA ARGUMENTS
This driver supports the following optional setting in the ups.conf(5):
modelname=name
Set model name
usd=delay
Set delay before shutdown on UPS
BUGS
The protocol for this UPS is not officially documented.
AUTHOR
Radek Benedikt <benedikt@lphard.cz>, Daniel Prynych <Daniel.Prynych@hornet.cz>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 VICTRONUPS(8)
Why do shell builtins like echo and pwd have binaries in /bin? When I do which pwd, I get the one in /bin. that means that I am not using the builtin version? What determines which one gets used? Is the which command a definitive way to determine what is being run when I enter pwd? (16 Replies)
Introduction
I have seen some misinformation regarding Unix file permissions. I will try to set the record straight. Take a look at this example of some output from ls:
$ ls -ld /usr/bin /usr/bin/cat
drwxrwxr-x 3 root bin 8704 Sep 23 2004 /usr/bin
-r-xr-xr-x 1 bin bin ... (6 Replies)
I see lot of ad-hoc shell scripts in our servers which don't have a shebang at the beginning .
Does this mean that it will run on any shell ?
Is it a good practice to create scripts (even ad-hoc ones) without shebang ? (16 Replies)
For a starter I know the braces are NOT in the code...
Consider these code snippets:-
#!/bin/bash --posix
x=0
somefunction()
if
then
echo "I am here."
fi
# somefunction
#!/bin/bash --posix
x=0
somefunction()
if (2 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hi all,
I am learning POSIX shell programming, and the book I read, uses the let command for integer arithmetic.
I have downloaded and use the shellcheck program on Linux.
This programs says:
In POSIX sh, 'let' is undefined.
See the screenshot attached.
What is the POSIX... (1 Reply)
I don't know how to start this but here goes.
I've been "using" Linux for over 10 years, possibly more and I still feel like I'm nowhere
where I should be. I'll be fair most of my time was spent either figuring out how
to run games on *nix at the time but as I got older and "wiser" I... (8 Replies)
In a professional environment with traditional application you often want (or are asked) to report the users.
Traditionally there is the who command
who | awk '{print $1}'telnetd or sshd register the users in the utmp file, to be shown with who, w, users, finger, pinky, ...
In addition they... (1 Reply)
Hi all, (mainly Neo)...
I keep noticing that the SQRT code I wrote recently for a POSIX shell keeps appearing, (the green colour sticks out like a sore thumb).
So I decided to take a look on Google.
Guess what?
UNIX.COM comes first in Google's listing just from two words, see image... (2 Replies)