tplot(1) User Commands tplot(1)NAME
tplot, t300, t300s, t4014, t450, tek, ver - graphics filters for various plotters
SYNOPSIS
/usr/bin/tplot [-T terminal]
DESCRIPTION
tplot reads plotting instructions from the standard input and produces plotting instructions suitable for a particular terminal on the
standard output.
If no terminal is specified, the environment variable TERM is used. The default terminal is tek.
ENVIRONMENT VARIABLES
Except for ver, the following terminal-types can be used with `lpr -g' (see lpr) to produce plotted output:
300 DASI 300 or GSI terminal (Diablo(R) mechanism).
300s | 300S DASI 300s terminal (Diablo mechanism).
450 DASI Hyterm 450 terminal (Diablo mechanism).
4014 | tek Tektronix 4014 and 4015 storage scope with Enhanced Graphics Module. (Use 4013 for Tektronix 4014 or 4015 without the
Enhanced Graphics Module).
ver Versatec(R) D1200A printer-plotter. The output is scan-converted and suitable input to `lpr -v'.
FILES
/usr/lib/t300
/usr/lib/t300s
/usr/lib/t4014
/usr/lib/t450
/usr/lib/tek
/usr/lib/vplot
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO lp(1), vi(1), attributes(5)SunOS 5.10 14 Jul 1994 tplot(1)
Check Out this Related Man Page
tplot(1) User Commands tplot(1)NAME
tplot, t300, t300s, t4014, t450, tek, ver - graphics filters for various plotters
SYNOPSIS
/usr/bin/tplot [-T terminal]
DESCRIPTION
tplot reads plotting instructions from the standard input and produces plotting instructions suitable for a particular terminal on the
standard output.
If no terminal is specified, the environment variable TERM is used. The default terminal is tek.
ENVIRONMENT VARIABLES
Except for ver, the following terminal-types can be used with `lpr -g' (see lpr) to produce plotted output:
300 DASI 300 or GSI terminal (Diablo(R) mechanism).
300s | 300S DASI 300s terminal (Diablo mechanism).
450 DASI Hyterm 450 terminal (Diablo mechanism).
4014 | tek Tektronix 4014 and 4015 storage scope with Enhanced Graphics Module. (Use 4013 for Tektronix 4014 or 4015 without the
Enhanced Graphics Module).
ver Versatec(R) D1200A printer-plotter. The output is scan-converted and suitable input to `lpr -v'.
FILES
/usr/lib/t300
/usr/lib/t300s
/usr/lib/t4014
/usr/lib/t450
/usr/lib/tek
/usr/lib/vplot
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO lp(1), vi(1), attributes(5)SunOS 5.11 14 Jul 1994 tplot(1)
I installed a FC array for the first time and everything looks OK
in mpathadm, cfgadm, but I don't know what to do next.
# stmsboot -L
non-STMS device name STMS device name
------------------------------------------------------------------
/dev/rdsk/c2t1d0 ... (3 Replies)
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
We're moving our production 3510FC to development, so we need to replace the production 3510FC. The 6140 is nice, but pricey.
Here's the question: Would two 2540's (RAID 10) be 'faster' than one 3510? (RAID 10) and faster than one 6140 (RAID 10)?
One StoregeTek 6140 (16x72GB 15k rpm fc-al... (12 Replies)
Hi,
We have 12x1TB SATA disks in our array and I need to create 10TB volume. I defined new storage profile on array and when I tried to add volume, I faced with ~2TB limit for new volumes. I didn't find how to set another limit on my storage profile. Is there is a way to configure one large... (3 Replies)
I have a Realtek 8139 interface in one of my machines and it will not connect to the network. /etc/rc.conf contains ifconfig_rl0="DHCP" and "rl0" was obtained from a dmesg. A network interface restart yields the following:
# /etc/rc.d/netif restart
Stopping network: lo0 rl0 fwe0 plip0.
rl0: no... (3 Replies)
Hello,
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000... (15 Replies)
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Hi,
I have a question about Sun StorageTek Common Array Manager (CAM): What is the concept of 'host'? Is it the hostname of the server that has access to the managed array? If so, can I use its IP instead of its hostname?
I've found a 'host' under CAM called XYZ (See below). In our... (7 Replies)
Hi Guys and Gals,
Wionder if you could help me, got a problem with a controller on a storagetek 2540, dead when fully powered up but if you reboot, it is ok for a couple of seconds (and you can ping it). Then once the array is fully up, it goes faulty and is un-pingable.
Had anyone... (4 Replies)
Bought a Sun StorageTek 2540 SAN array a few years ago from a company that was going out of business. When we first set it up, we were able to get all the software (Common Array Manager) and firmware directly from Sun.
We just upgraded the drives, but the array is too large for the firmware. Now... (6 Replies)
Hi ,
I have replaced the cache batteries of my storageTek 2540 since yesterday at 7 PM and after charging the status of the batteries is today "Learning" .
I want to know if it's normal behavior ?
How can make to have OK status ?
Thanks for help
58ksh# sscs list -d ms_array -t Battery... (4 Replies)