dat_lmr_free(3DAT) Direct Access Transport Library Functions dat_lmr_free(3DAT)NAME
dat_lmr_free - destroy an instance of the LMR
SYNOPSIS
cc [ flag... ] file... -ldat [ library... ]
#include <dat/udat.h>
DAT_RETURN
dat_lmr_free (
IN DAT_LMR_HANDLE lmr_handle
)
PARAMETERS
lmr_handle: Handle for an instance of LMR to be destroyed.
DESCRIPTION
The dat_lmr_free() function destroys an instance of the LMR. The LMR cannot be destroyed if it is in use by an RMR. The operation does not
deallocate the memory region or unpin memory on a host.
Use of the handle of the destroyed LMR in any subsequent operation except for dat_lmr_free() fails. Any DTO operation that uses the
destroyed LMR after the dat_lmr_free() is completed shall fail and report a protection violation. The use of rmr_context of the destroyed
LMR by a remote peer for an RDMA DTO results in an error and broken connection on which it was used. Any remote RDMA operation that uses
the destroyed LMR rmr_context, whose Transport-specific request arrived to the local host after the dat_lmr_free() has completed, fails and
reports a protection violation. Remote RDMA operation that uses the destroyed LMR rmr_context, whose Transport-specific request arrived to
the local host prior to the dat_lmr_free() returns, might or might not complete successfully. If it fails, DAT_DTO_ERR_REMOTE_ACCESS is
reported in DAT_DTO_COMPLETION_STATUS for the remote RDMA DTO and the connection is broken.
RETURN VALUES
DAT_SUCCESS The operation was successful.
DAT_INVALID_HANDLE The lmr_handle parameter is invalid.
DAT_INVALID_STATE Parameter in an invalid state; LMR is in use by an RMR instance.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: uDAPL, 1.1, 1.2 |
+-----------------------------+-----------------------------+
|MT-Level |Unsafe |
+-----------------------------+-----------------------------+
SEE ALSO libdat(3LIB), attributes(5)SunOS 5.10 16 Jul 2004 dat_lmr_free(3DAT)
Check Out this Related Man Page
dat_lmr_create(3DAT) Direct Access Transport Library Functions dat_lmr_create(3DAT)NAME
dat_lmr_create - register a memory region with an IA
SYNOPSIS
cc [ flag... ] file... -ldat [ library... ]
#include <dat/udat.h>
DAT_RETURN
dat_lmr_create (
IN DAT_IA_HANDLE ia_handle,
IN DAT_MEM_TYPE mem_type,
IN DAT_REGION_DESCRIPTION region_description,
IN DAT_VLEN length,
IN DAT_PZ_HANDLE pz_handle,
IN DAT_MEM_PRIV_FLAGS mem_privileges,
OUT DAT_LMR_HANDLE *lmr_handle,
OUT DAT_LMR_CONTEXT *lmr_context,
OUT DAT_RMR_CONTEXT *rmr_context,
OUT DAT_VLEN *registered_size,
OUT DAT_VADDR *registered_address
)
PARAMETERS
ia_handle Handle for an open instance of the IA.
mem_type Type of memory to be registered. The following list outlines the memory type specifications.
DAT_MEM_TYPE_VIRTUAL
Consumer virtual memory.
Region description: A pointer to a contiguous user virtual range.
Length: Length of the Memory Region.
DAT_MEM_TYPE_LMR
LMR.
Region description: An LMR_handle.
Length: Length parameter is ignored.
DAT_MEM_TYPE_SHARED_VIRTUAL
Shared memory region. All DAT Consumers of the same uDAPL Provider specify the same Consumer cookie to indicate who is
sharing the shared memory region. This supports a peer-to-peer model of shared memory. All DAT Consumers of the shared
memory must allocate the memory region as shared memory using Platform-specific primitives.
Region description: A structure with 2 elements, where the first one is of type DAT_LMR_COOKIE and is a unique identi-
fier of the shared memory region, and the second one is a pointer to a contiguous user virtual range.
Length: Length of the Memory Region
region_descriptiPointer to type-specific data describing the memory in the region to be registered. The type is derived from the mem_type
parameter.
length Length parameter accompanying the region_description.
pz_handle Handle for an instance of the Protection Zone.
mem_privileges: Consumer-requested memory access privileges for the registered local memory region. The Default value is
DAT_MEM_PRIV_NONE_FLAG. The constant value DAT_MEM_PRIV_ALL_FLAG = 0x33, which specifies both Read and Write privileges, is
also defined. Memory privilege definitions are as follows:
Local Read
DAT_MEM_PRIV_LOCAL_READ_FLAG
0x01 Local read access requested.
Local Write
DAT_MEM_PRIV_LOCAL_WRITE_FLAG
0x10 Local write access requested.
Remote Read
DAT_MEM_PRIV_REMOTE_READ_FLAG
0x02 Remote read access requested.
Remote Write
DAT_MEM_PRIV_REMOTE_WRITE_FLAG
0x20 Remote write access requested.
lmr_handle Handle for the created instance of the LMR.
lmr_context Context for the created instance of the LMR to use for DTO local buffers.
registered_size Actual memory size registered by the Provider.
registered_addreActual base address of the memory registered by the Provider.
DESCRIPTION
The dat_lmr_create() function registers a memory region with an IA. The specified buffer must have been previously allocated and pinned by
the uDAPL Consumer on the platform. The Provider must do memory pinning if needed, which includes whatever OS-dependent steps are required
to ensure that the memory is available on demand for the Interface Adapter. uDAPL does not require that the memory never be swapped out;
just that neither the hardware nor the Consumer ever has to deal with it not being there. The created lmr_context can be used for local
buffers of DTOs and for binding RMRs, and lmr_handle can be used for creating other LMRs. For uDAPL the scope of the lmr_context is the
address space of the DAT Consumer.
The return values of registered_size and registered_address indicate to the Consumer how much the contiguous region of Consumer virtual
memory was registered by the Provider and where the region starts in the Consumer virtual address.
The mem_type parameter indicates to the Provider the kind of memory to be registered, and can take on any of the values defined in the ta-
ble in the PARAMETERS section.
The pz_handle parameter allows Consumers to restrict local accesses to the registered LMR by DTOs.
DAT_LMR_COOKIE is a pointer to a unique identifier of the shared memory region of the DAT_MEM_TYPE_SHARED_VIRTUAL DAT memory type. The
identifier is an array of 40 bytes allocated by the Consumer. The Provider must check the entire 40 bytes and shall not interpret it as a
null-terminated string.
The return value of rmr_context can be transferred by the local Consumer to a Consumer on a remote host to be used for an RDMA DTO.
If mem_privileges does not specify remote Read and Write privileges, rmr_context is not generated and NULL is returned. No remote privi-
leges are given for Memory Region unless explicitly asked for by the Consumer.
RETURN VALUES
DAT_SUCCESS The operation was successful.
DAT_UNSUFFICIENT_RESOURCES The operation failed due to resource limitations.
DAT_INVALID_PARAMETER Invalid parameter.
DAT_INVALID_HANDLE Invalid DAT handle.
DAT_INVALID_STATE Parameter in an invalid state. For example, shared virtual buffer was not created shared by the platform.
DAT_MODEL_NOT_SUPPORTED The requested Model was not supported by the Provider. For example, requested Memory Type was not supported
by the Provider.
USAGE
Consumers can create an LMR over the existing LMR memory with different Protection Zones and privileges using previously created IA trans-
lation table entries.
The Consumer should use rmr_context with caution. Once advertised to a remote peer, the rmr_context of the LMR cannot be invalidated. The
only way to invalidate it is to destroy the LMR with dat_lmr_free(3DAT).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: uDAPL, 1.1, 1.2 |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO dat_lmr_free(3DAT), libdat(3LIB), attributes(5)SunOS 5.10 16 Jul 2004 dat_lmr_create(3DAT)