usb_if_descr(9s) [sunos man page]

usb_if_descr(9S)					    Data Structures for Drivers 					  usb_if_descr(9S)

NAME

       usb_if_descr - USB interface descriptor

SYNOPSIS

       #include <sys/usb/usba.h>

INTERFACE LEVEL

       Solaris DDI specific (Solaris DDI)

DESCRIPTION

       The  usb_if_descr_t  interface descriptor defines attributes of an interface. A configuration contains one or more interfaces. An interface
       contains one or more endpoints.

       Please refer to Section 9.6.5 of the USB 2.0 specification. The USB 2.0 specification is available at www.usb.org.

       One  or	more  configuration  descriptors  are  retrieved  from	a  USB	device	during	device	enumeration.  They  can  be  accessed  via
       usb_get_dev_data(9F).

       A  interface descriptor has the following fields:

       uint8_t	       bLength		       Size of this descriptor
					       in bytes.

       uint8_t	       bDescriptorType	       Set to USB_DESCR_TYPE_IF.

       uint8_t	       bInterfaceNumber        Interface number (0-based).

       uint8_t	       bAlternateSetting       Alternate setting number for
					       this interface and its
					       endpoints (0-based).

       uint8_t	       bNumEndpoints	       Number of endpoints,
					       excluding endpoint 0.

       uint8_t	       bInterfaceClass	       Interface Class code
					       (see below).

       uint8_t	       bInterfaceSubClass      Sub class code.	(See USB 2.0
					       specification of applicable
					       interface class for information.)

       uint8_t	       bInterfaceProtocol      Protocol code.  (See USB 2.0
					       specification of applicable
					       interface class for information.)

       uint8_t	       iInterface	       Index of optional string
					       describing this interface
					       Valid if > 0. Pass to
					       usb_get_string_descr(9F) to
					       retrieve string.

       USB 2.0 specification interface descriptor bInterfaceClass field
       values are as follows:

	       USB_CLASS_APP		 Application-specific interface class

	       USB_CLASS_AUDIO		 Audio interface class

	       USB_CLASS_CCID		 Chip/Smartcard interface class

	       USB_CLASS_CDC_CTRL	 CDC control interface class

	       USB_CLASS_CDC_DATA	 CDC data interface class

	       USB_CLASS_SECURITY	 Content security interface class

	       USB_CLASS_DIAG		 Diagnostic interface class

	       USB_CLASS_HID		 HID interface class

	       USB_CLASS_HUB		 HUB interface class

	       USB_CLASS_MASS_STORAGE	 Mass storage interface class

	       USB_CLASS_PHYSICAL	 Physical interface class

	       USB_CLASS_PRINTER	 Printer interface class

	       USB_CLASS_VENDOR_SPEC	 Vendor-specific interface class

	       USB_CLASS_WIRELESS	 Wireless interface class

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |PCI-based systems 	   |
       +-----------------------------+-----------------------------+
       |Interface stability	     |Evolving			   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWusbu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       attributes(5),  usb_get_alt_if(9F), usb_get_cfg(9F), usb_get_dev_data(9F), usb_get_string_descr(9F), usb_parse_data(9F), usb_cfg_descr(9S),
       usb_ctrl_request(9S), usb_dev_descr(9S), usb_dev_qlf_descr(9S), usb_ep_descr(9S), usb_other_speed_cfg_descr(9S), usb_string_descr(9S)

SunOS 5.10							    5 Jan 2004							  usb_if_descr(9S)

Check Out this Related Man Page

usb_dev_descr(9S)					    Data Structures for Drivers 					 usb_dev_descr(9S)

NAME

       usb_dev_descr - USB device descriptor

SYNOPSIS

       #include <sys/usb/usba.h>

INTERFACE LEVEL

       Solaris DDI specific (Solaris DDI)

DESCRIPTION

       The  usb_dev_descr_t  device descriptor defines device-wide attributes. Please refer to Section 9.6.1 of the USB 2.0 specification. The USB
       2.0 specification is available at www.usb.org.

       The device descriptor is retrieved from a USB device during device enumeration and can be accessed via usb_get_dev_data(9F).

       A device descriptor contains the following fields:

	  uint8_t     bLength		  Size of this descriptor,
					   in bytes.

	   uint8_t     bDescriptorType	   Set to USB_DESCR_TYPE_DEV.

	   uint16_t    bcdUSB		   USB specification release
					   number supported, in bcd.

	   uint8_t     bDeviceClass	   Class code (see below).

	   uint8_t     bDeviceSubClass	   Subclass code (see USB 2.0
					   specification of applicable
					   device class for information.)

	   uint8_t     bDeviceProtocol	   Protocol code (see USB 2.0
					   specification of applicable
					   device class for information.)

	   uint8_t     bMaxPacketSize0	   Maximum packet size of
					   endpoint 0.

	   uint16_t    idVendor 	   vendor ID value.

	   uint16_t    idProduct	   product ID value.

	   uint16_t    bcdDevice	   Device release number in
					   binary coded decimal.

	   uint8_t     iManufacturer	   Index of optional manufacturer
					   description string.
					   Valid if > 0.

	   uint8_t     iProduct 	   Index of optional product
					   description string.
					   Valid if > 0.

	   uint8_t     iSerialNumber	   Index of optional serial
					   number string.
					   Valid if > 0.

	   uint8_t     bNumConfigurations  Number of available
					   configurations.

	   Device descriptors bDeviceClass values:

	   USB_CLASS_PER_INTERFACE	   Class information is at
					   interface level.

	   USB_CLASS_COMM		   CDC control device class.

	   USB_CLASS_DIAG		   Diagnostic device class.

	   USB_CLASS_HUB		   HUB device class.

	   USB_CLASS_MISC		   MISC device class.

	   USB_CLASS_VENDOR_SPEC	   Vendor-specific class.

	   USB_CLASS_WIRELESS		   Wireless controller
					   device class.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |PCI-based systems 	   |
       +-----------------------------+-----------------------------+
       |Interface stability	     |Committed 		   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWusbu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       attributes(5), usb_get_alt_if(9F), usb_get_cfg(9F), usb_get_dev_data(9F), usb_get_string_descr(9F), usb_parse_data(9F),	usb_cfg_descr(9S),
       usb_ctrl_request(9S), usb_dev_qlf_descr(9S), usb_ep_descr(9S), usb_if_descr(9S), usb_other_speed_cfg_descr(9S), usb_string_descr(9S)

SunOS 5.11							    5 Jan 2004							 usb_dev_descr(9S)

Linux and UNIX Man Pages

usb_if_descr(9s) [sunos man page]

Check Out this Related Man Page