biosdevname(1) [suse man page]

BIOSDEVNAME(1)						      General Commands Manual						    BIOSDEVNAME(1)

NAME

       biosdevname - give BIOS-given name of a device

SYNOPSIS

       biosdevname [options] [args]...

DESCRIPTION

       biosdevname in its simplest form takes a kernel device name as an argument, and returns the BIOS-given name it "should" be.

OPTIONS

       -i, --interface
	      Treat [args] as ethernet devs

       -d, --debug
	      Enable debugging

       -n, --nosort
	      Don't sort the PCI device list breadth-first

       --policy [kernelnames|all_ethN|all_names|embedded_ethN_slots_names]

SEE ALSO

       http://linux.dell.com/files/biosdevname/

AUTHOR

       biosdevname was written by  Matt Domsch <Matt_Domsch@dell.com>

       This manual page was written by Rudy Gevaert <Rudy.Gevaert@UGent.be>, for the Debian project (but may be used by others).

								   May 16, 2007 						    BIOSDEVNAME(1)

TRM(4)							   BSD Kernel Interfaces Manual 						    TRM(4)

NAME

     trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device trm

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   trm_load="YES"

DESCRIPTION

     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

     SCSI controllers supported by the trm driver include:

     o	 Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
     o	 Tekram DC-315U PCI Ultra SCSI adapter without BIOS
     o	 Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
     o	 Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
     o	 Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
     o	 Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

     For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.

SEE ALSO

     cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

     http://www.tekram.com/

AUTHORS

     The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard
     <cognet@FreeBSD.org>.

BSD
								 December 8, 2002							       BSD