General(3) User Contributed Perl Documentation General(3)
NAME
Config::General - Generic Config Module
SYNOPSIS
#
# the OOP way
use Config::General;
$conf = new Config::General("rcfile");
my %config = $conf->getall;
#
# the procedural way
use Config::General qw(ParseConfig SaveConfig SaveConfigString);
my %config = ParseConfig("rcfile");
DESCRIPTION
This module opens a config file and parses its contents for you. The new method requires one parameter which needs to be a filename. The
method getall returns a hash which contains all options and its associated values of your config file.
The format of config files supported by Config::General is inspired by the well known Apache config format, in fact, this module is 100%
compatible to Apache configs, but you can also just use simple
name/value pairs in your config files.
In addition to the capabilities of an Apache config file it supports some enhancements such as here-documents, C-style comments or
multiline options.
SUBROUTINES
/METHODS
new()
Possible ways to call new():
$conf = new Config::General("rcfile");
$conf = new Config::General(\%somehash);
$conf = new Config::General( %options ); # see below for description of possible options
This method returns a Config::General object (a hash blessed into "Config::General" namespace. All further methods must be used from
that returned object. see below.
You can use the new style with hash parameters or the old style which is of course still supported. Possible parameters to new() are:
* a filename of a configfile, which will be opened and parsed by the parser
or
* a hash reference, which will be used as the config.
An alternative way to call new() is supplying an option- hash with one or more of the following keys set:
-ConfigFile
A filename or a filehandle, i.e.:
-ConfigFile => "rcfile" or -ConfigFile => $FileHandle
-ConfigHash
A hash reference, which will be used as the config, i.e.:
-ConfigHash => \%somehash
-String
A string which contains a whole config, or an arrayref containing the whole config line by line. The parser will parse the
contents of the string instead of a file. i.e:
-String => $complete_config
it is also possible to feed an array reference to -String:
-String => @config_lines
-AllowMultiOptions
If the value is "no", then multiple identical options are disallowed. The default is "yes". i.e.:
-AllowMultiOptions => "yes"
see IDENTICAL OPTIONS for details.
-LowerCaseNames
If set to a true value, then all options found in the config will be converted to lowercase. This allows you to provide case-in-
sensitive configs. The values of the options will not lowercased.
-UseApacheInclude
If set to a true value, the parser will consider "include ..." as valid include statement (just like the well known Apache include
statement).
-IncludeRelative
If set to a true value, included files with a relative path (i.e. "cfg/blah.conf") will be opened from within the location of the
configfile instead from within the location of the script($0). This works only if the configfile has a absolute pathname (i.e.
"/etc/main.conf").
If the variable -ConfigPath has been set and if the file to be included could not be found in the location relative to the current
config file, the module will search within -ConfigPath for the file. See the description of -ConfigPath for more details.
-IncludeDirectories
If set to a true value, you may specify include a directory, in which case all files inside the directory will be loaded in ASCII
order. Directory includes will not recurse into subdirectories. This is comparable to including a directory in Apache-style
config files.
-IncludeGlob
If set to a true value, you may specify a glob pattern for an include to include all matching files (e.g. <<include
conf.d/*.conf>>). Also note that as with standard file patterns, * will not match dot-files, so <<include dir/*>> is often more
desirable than including a directory with -IncludeDirectories.
-IncludeAgain
If set to a true value, you will be able to include a sub-configfile multiple times. With the default, false, you will get a
warning about duplicate includes and only the first include will succeed.
Reincluding a configfile can be useful if it contains data that you want to be present in multiple places in the data tree. See
the example under "INCLUDES".
Note, however, that there is currently no check for include recursion.
-ConfigPath
As mentioned above, you can use this variable to specify a search path for relative config files which have to be included.
Config::General will search within this path for the file if it cannot find the file at the location relative to the current config
file.
To provide multiple search paths you can specify an array reference for the path. For example:
@path = qw(/usr/lib/perl /nfs/apps/lib /home/lib);
..
-ConfigPath => @path
-MergeDuplicateBlocks
If set to a true value, then duplicate blocks, that means blocks and named blocks, will be merged into a single one (see below for
more details on this). The default behavior of Config::General is to create an array if some junk in a config appears more than
once.
-MergeDuplicateOptions
If set to a true value, then duplicate options will be merged. That means, if the same option occurs more than once, the last one
will be used in the resulting config hash.
Setting this option implies -AllowMultiOptions == false unless you set -AllowMultiOptions explicit to 'true'. In this case
duplicate blocks are allowed and put into an array but duplicate options will be merged.
-AutoLaunder
If set to a true value, then all values in your config file will be laundered to allow them to be used under a -T taint flag. This
could be regarded as circumventing the purpose of the -T flag, however, if the bad guys can mess with your config file, you have
problems that -T will not be able to stop. AutoLaunder will only handle a config file being read from -ConfigFile.
-AutoTrue
If set to a true value, then options in your config file, whose values are set to true or false values, will be normalised to 1 or
0 respectively.
The following values will be considered as true:
yes, on, 1, true
The following values will be considered as false:
no, off, 0, false
This effect is case-insensitive, i.e. both "Yes" or "oN" will result in 1.
-FlagBits
This option takes one required parameter, which must be a hash reference.
The supplied hash reference needs to define variables for which you want to preset values. Each variable you have defined in this
hash-ref and which occurs in your config file, will cause this variable being set to the preset values to which the value in the
config file refers to.
Multiple flags can be used, separated by the pipe character |.
Well, an example will clarify things:
my $conf = new Config::General(
-ConfigFile => "rcfile",
-FlagBits => {
Mode => {
CLEAR => 1,
STRONG => 1,
UNSECURE => "32bit" }
}
);
In this example we are defining a variable named "Mode" which may contain one or more of "CLEAR", "STRONG" and "UNSECURE" as value.
The appropriate config entry may look like this:
# rcfile
Mode = CLEAR | UNSECURE
The parser will create a hash which will be the value of the key "Mode". This hash will contain all flags which you have pre-
defined, but only those which were set in the config will contain the pre-defined value, the other ones will be undefined.
The resulting config structure would look like this after parsing:
%config = (
Mode => {
CLEAR => 1,
UNSECURE => "32bit",
STRONG => undef,
}
);
This method allows the user (or, the "maintainer" of the configfile for your application) to set multiple pre-defined values for
one option.
Please beware, that all occurrences of those variables will be handled this way, there is no way to distinguish between variables
in different scopes. That means, if "Mode" would also occur inside a named block, it would also parsed this way.
Values which are not defined in the hash-ref supplied to the parameter -FlagBits and used in the corresponding variable in the
config will be ignored.
Example:
# rcfile
Mode = BLAH | CLEAR
would result in this hash structure:
%config = (
Mode => {
CLEAR => 1,
UNSECURE => undef,
STRONG => undef,
}
);
"BLAH" will be ignored silently.
-DefaultConfig
This can be a hash reference or a simple scalar (string) of a config. This causes the module to preset the resulting config hash
with the given values, which allows you to set default values for particular config options directly.
-Tie
-Tie takes the name of a Tie class as argument that each new hash should be based off of.
This hash will be used as the 'backing hash' instead of a standard Perl hash, which allows you to affect the way, variable storing
will be done. You could, for example supply a tied hash, say Tie::DxHash, which preserves ordering of the keys in the config (which
a standard Perl hash won't do). Or, you could supply a hash tied to a DBM file to save the parsed variables to disk.
There are many more things to do in tie-land, see tie to get some interesting ideas.
If you want to use the -Tie feature together with -DefaultConfig make sure that the hash supplied to -DefaultConfig must be tied to
the same Tie class.
Make sure that the hash which receives the generated hash structure (e.g. which you are using in the assignment: %hash =
$config->getall()) must be tied to the same Tie class.
Example:
use Config::General qw(ParseConfig);
use Tie::IxHash;
tie my %hash, "Tie::IxHash";
%hash = ParseConfig(
-ConfigFile => shift(),
-Tie => "Tie::IxHash"
);
-InterPolateVars
If set to a true value, variable interpolation will be done on your config input. See Config::General::Interpolated for more
information.
-InterPolateEnv
If set to a true value, environment variables can be used in configs.
This implies -InterPolateVars.
-ExtendedAccess
If set to a true value, you can use object oriented (extended) methods to access the parsed config. See Config::General::Extended
for more informations.
-StrictObjects
By default this is turned on, which causes Config::General to croak with an error if you try to access a non-existent key using the
OOP-way (-ExtendedAcess enabled). If you turn -StrictObjects off (by setting to 0 or "no") it will just return an empty
object/hash/scalar. This is valid for OOP-access 8via AUTOLOAD and for the methods obj(), hash() and value().
-StrictVars
By default this is turned on, which causes Config::General to croak with an error if an undefined variable with InterPolateVars
turned on occurs in a config. Set to false (i.e. 0) to avoid such error messages.
-SplitPolicy
You can influence the way how Config::General decides which part of a line in a config file is the key and which one is the value.
By default it tries its best to guess. That means you can mix equalsign assignments and whitespace assignments.
However, somtime you may wish to make it more strictly for some reason. In this case you can set -SplitPolicy. The possible values
are: 'guess' which is the default, 'whitespace' which causes the module to split by whitespace, 'equalsign' which causes it to
split strictly by equal sign, or 'custom'. In the latter case you must also set -SplitDelimiter to some regular expression of your
choice. For example:
-SplitDelimiter => 's*:s*'
will cause the module to split by colon while whitespace which surrounds the delimiter will be removed.
Please note that the delimiter used when saving a config (save_file() or save_string()) will be chosen according to the current
-SplitPolicy. If -SplitPolicy is set to 'guess' or 'whitespace', 3 spaces will be used to delimit saved options. If 'custom' is
set, then you need to set -StoreDelimiter.
-SplitDelimiter
Set this to any arbitrary regular expression which will be used for option/value splitting. -SplitPolicy must be set to 'custom' to
make this work.
-StoreDelimiter
You can use this parameter to specify a custom delimiter to use when saving configs to a file or string. You only need to set it if
you want to store the config back to disk and if you have -SplitPolicy set to 'custom'.
Be very careful with this parameter.
-CComments
Config::General is able to notice c-style comments (see section COMMENTS). But for some reason you might no need this. In this
case you can turn this feature off by setting -CComments to a false value('no', 0, 'off').
By default -CComments is turned on.
-BackslashEscape
Deprecated Option.
-SlashIsDirectory
If you turn on this parameter, a single slash as the last character of a named block will be considered as a directory name.
By default this flag is turned off, which makes the module somewhat incompatible to Apache configs, since such a setup will be
normally considered as an explicit empty block, just as XML defines it.
For example, if you have the following config:
<Directory />
Index index.awk
</Directory>
you will get such an error message from the parser:
EndBlock "</Directory>" has no StartBlock statement (level: 1, chunk 10)!
This is caused by the fact that the config chunk below will be internally converted to:
<Directory><Directory />
Index index.awk
</Directory>
Now there is one '</Directory>' too much. The proper solution is to use quotation to circumvent this error:
<Directory "/">
Index index.awk
</Directory>
However, a raw apache config comes without such quotes. In this case you may consider to turn on -SlashIsDirectory.
Please note that this is a new option (incorporated in version 2.30), it may lead to various unexpected side effects or other
failures. You've been warned.
-ApacheCompatible
Over the past years a lot of options has been incorporated into Config::General to be able to parse real Apache configs.
The new -ApacheCompatible option now makes it possible to tweak all options in a way that Apache configs can be parsed.
This is called "apache compatibility mode" - if you will ever have problems with parsing Apache configs without this option being
set, you'll get no help by me. Thanks :)
The following options will be set:
UseApacheInclude = 1
IncludeRelative = 1
IncludeDirectories = 1
IncludeGlob = 1
SlashIsDirectory = 1
SplitPolicy = 'equalsign'
CComments = 0
Take a look into the particular documentation sections what those options are doing.
Beside setting some options it also turns off support for explicit empty blocks.
-UTF8
If turned on, all files will be opened in utf8 mode. This may not work properly with older versions of Perl.
-SaveSorted
If you want to save configs in a sorted manner, turn this parameter on. It is not enabled by default.
getall()
Returns a hash structure which represents the whole config.
files()
Returns a list of all files read in.
save_file()
Writes the config hash back to the hard disk. This method takes one or two parameters. The first parameter must be the filename where
the config should be written to. The second parameter is optional, it must be a reference to a hash structure, if you set it. If you do
not supply this second parameter then the internal config hash, which has already been parsed, will be used.
Please note that any occurence of comments will be ignored by getall() and thus be lost after you call this method.
You need also to know that named blocks will be converted to nested blocks (which is the same from the perl point of view). An example:
<user hans>
id 13
</user>
will become the following after saving:
<user>
<hans>
id 13
</hans>
</user>
Example:
$conf_obj->save_file("newrcfile", \%config);
or, if the config has already been parsed, or if it didn't change:
$conf_obj->save_file("newrcfile");
save_string()
This method is equivalent to the previous save_file(), but it does not store the generated config to a file. Instead it returns it as a
string, which you can save yourself afterwards.
It takes one optional parameter, which must be a reference to a hash structure. If you omit this parameter, the internal config hash,
which has already been parsed, will be used.
Example:
my $content = $conf_obj->save_string(\%config);
or:
my $content = $conf_obj->save_string();
CONFIG FILE FORMAT
Lines beginning with # and empty lines will be ignored. (see section COMMENTS!) Spaces at the beginning and the end of a line will also be
ignored as well as tabulators. If you need spaces at the end or the beginning of a value you can surround it with double quotes. An
option line starts with its name followed by a value. An equal sign is optional. Some possible examples:
user max
user = max
user max
If there are more than one statements with the same name, it will create an array instead of a scalar. See the example below.
The method getall returns a hash of all values.
BLOCKS
You can define a block of options. A block looks much like a block in the wellknown Apache config format. It starts with <blockname> and
ends with </blockname>. An example:
<database>
host = muli
user = moare
dbname = modb
dbpass = D4r_9Iu
</database>
Blocks can also be nested. Here is a more complicated example:
user = hans
server = mc200
db = maxis
passwd = D3rf$
<jonas>
user = tom
db = unknown
host = mila
<tablestructure>
index int(100000)
name char(100)
prename char(100)
city char(100)
status int(10)
allowed moses
allowed ingram
allowed joice
</tablestructure>
</jonas>
The hash which the method getall returns look like that:
print Data::Dumper(\%hash);
$VAR1 = {
'passwd' => 'D3rf$',
'jonas' => {
'tablestructure' => {
'prename' => 'char(100)',
'index' => 'int(100000)',
'city' => 'char(100)',
'name' => 'char(100)',
'status' => 'int(10)',
'allowed' => [
'moses',
'ingram',
'joice',
]
},
'host' => 'mila',
'db' => 'unknown',
'user' => 'tom'
},
'db' => 'maxis',
'server' => 'mc200',
'user' => 'hans'
};
If you have turned on -LowerCaseNames (see new()) then blocks as in the following example:
<Dir>
<AttriBUTES>
Owner root
</attributes>
</dir>
would produce the following hash structure:
$VAR1 = {
'dir' => {
'attributes' => {
'owner => "root",
}
}
};
As you can see, the keys inside the config hash are normalized.
Please note, that the above config block would result in a valid hash structure, even if -LowerCaseNames is not set! This is because
Config::General does not use the block names to check if a block ends, instead it uses an internal state counter, which indicates a block
end.
If the module cannot find an end-block statement, then this block will be ignored.
NAMED BLOCKS
If you need multiple blocks of the same name, then you have to name every block. This works much like Apache config. If the module finds a
named block, it will create a hashref with the left part of the named block as the key containing one or more hashrefs with the right part
of the block as key containing everything inside the block(which may again be nested!). As examples says more than words:
# given the following sample
<Directory /usr/frisco>
Limit Deny
Options ExecCgi Index
</Directory>
<Directory /usr/frik>
Limit DenyAll
Options None
</Directory>
# you will get:
$VAR1 = {
'Directory' => {
'/usr/frik' => {
'Options' => 'None',
'Limit' => 'DenyAll'
},
'/usr/frisco' => {
'Options' => 'ExecCgi Index',
'Limit' => 'Deny'
}
}
};
You cannot have more than one named block with the same name because it will be stored in a hashref and therefore be overwritten if a block
occurs once more.
WHITESPACE IN BLOCKS
The normal behavior of Config::General is to look for whitespace in block names to decide if it's a named block or just a simple block.
Sometimes you may need blocknames which have whitespace in their names.
With named blocks this is no problem, as the module only looks for the first whitespace:
<person hugo gera>
</person>
would be parsed to:
$VAR1 = {
'person' => {
'hugo gera' => {
},
}
};
The problem occurs, if you want to have a simple block containing whitespace:
<hugo gera>
</hugo gera>
This would be parsed as a named block, which is not what you wanted. In this very case you may use quotation marks to indicate that it is
not a named block:
<"hugo gera">
</"hugo gera">
The save() method of the module inserts automatically quotation marks in such cases.
EXPLICIT EMPTY BLOCKS
Beside the notation of blocks mentioned above it is possible to use explicit empty blocks.
Normally you would write this in your config to define an empty block:
<driver Apache>
</driver>
To save writing you can also write:
<driver Apache/>
which is the very same as above. This works for normal blocks and for named blocks.
IDENTICAL OPTIONS (ARRAYS)
You may have more than one line of the same option with different values.
Example:
log log1
log log2
log log2
You will get a scalar if the option occurred only once or an array if it occurred more than once. If you expect multiple identical options,
then you may need to check if an option occurred more than once:
$allowed = $hash{jonas}->{tablestructure}->{allowed};
if(ref($allowed) eq "ARRAY") {
@ALLOWED = @{$allowed};
else {
@ALLOWED = ($allowed);
}
The same applies to blocks and named blocks too (they are described in more detail below). For example, if you have the following config:
<dir blah>
user max
</dir>
<dir blah>
user hannes
</dir>
then you would end up with a data structure like this:
$VAR1 = {
'dir' => {
'blah' => [
{
'user' => 'max'
},
{
'user' => 'hannes'
}
]
}
};
As you can see, the two identical blocks are stored in a hash which contains an array(-reference) of hashes.
Under some rare conditions you might not want this behavior with blocks (and named blocks too). If you want to get one single hash with the
contents of both identical blocks, then you need to turn the new() parameter -MergeDuplicateBlocks on (see above). The parsed structure of
the example above would then look like this:
$VAR1 = {
'dir' => {
'blah' => {
'user' => [
'max',
'hannes'
]
}
}
};
As you can see, there is only one hash "dir->{blah}" containing multiple "user" entries. As you can also see, turning on
-MergeDuplicateBlocks does not affect scalar options (i.e. "option = value"). In fact you can tune merging of duplicate blocks and options
independent from each other.
If you don't want to allow more than one identical options, you may turn it off by setting the flag AllowMultiOptions in the new() method
to "no". If turned off, Config::General will complain about multiple occurring options with identical names!
FORCE SINGLE VALUE ARRAYS
You may also force a single config line to get parsed into an array by turning on the option -ForceArray and by surrounding the value of
the config entry by []. Example:
hostlist = [ foo.bar ]
Will be a singlevalue array entry if the option is turned on. If you want it to remain to be an array you have to turn on -ForceArray
during save too.
LONG LINES
If you have a config value, which is too long and would take more than one line, you can break it into multiple lines by using the
backslash character at the end of the line. The Config::General module will concatenate those lines to one single-value.
Example:
command = cat /var/log/secure/tripwire |
mail "-s" "report from tripwire"
honey@myotherhost.nl
command will become:
"cat /var/log/secure/tripwire | mail "-s" 'report from twire' honey@myotherhost.nl"
HERE DOCUMENTS
You can also define a config value as a so called "here-document". You must tell the module an identifier which idicates the end of a here
document. An identifier must follow a "<<".
Example:
message <<EOF
we want to
remove the
homedir of
root.
EOF
Everything between the two "EOF" strings will be in the option message.
There is a special feature which allows you to use indentation with here documents. You can have any amount of whitespace or tabulators in
front of the end identifier. If the module finds spaces or tabs then it will remove exactly those amount of spaces from every line inside
the here-document.
Example:
message <<EOF
we want to
remove the
homedir of
root.
EOF
After parsing, message will become:
we want to
remove the
homedir of
root.
because there were the string " " in front of EOF, which were cut from every line inside the here-document.
INCLUDES
You can include an external file at any posision in your config file using the following statement in your config file:
<<include externalconfig.rc>>
If you turned on -UseApacheInclude (see new()), then you can also use the following statement to include an external file:
include externalconfig.rc
This file will be inserted at the position where it was found as if the contents of this file were directly at this position.
You can also recursively include files, so an included file may include another one and so on. Beware that you do not recursively load the
same file, you will end with an error message like "too many open files in system!".
By default included files with a relative pathname will be opened from within the current working directory. Under some circumstances it
maybe possible to open included files from the directory, where the configfile resides. You need to turn on the option -IncludeRelative
(see new()) if you want that. An example:
my $conf = Config::General(
-ConfigFile => "/etc/crypt.d/server.cfg"
-IncludeRelative => 1
);
/etc/crypt.d/server.cfg:
<<include acl.cfg>>
In this example Config::General will try to include acl.cfg from /etc/crypt.d:
/etc/crypt.d/acl.cfg
The default behavior (if -IncludeRelative is not set!) will be to open just acl.cfg, wherever it is, i.e. if you did a
chdir("/usr/local/etc"), then Config::General will include:
/usr/local/etc/acl.cfg
Include statements can be case insensitive (added in version 1.25).
Include statements will be ignored within C-Comments and here-documents.
By default, a config file will only be included the first time it is referenced. If you wish to include a file in multiple places, set
/-IncludeAgain to true. But be warned: this may lead to infinite loops, so make sure, you're not including the same file from within
itself!
Example:
# main.cfg
<object billy>
class=Some::Class
<printers>
include printers.cfg
</printers>
# ...
</object>
<object bob>
class=Another::Class
<printers>
include printers.cfg
</printers>
# ...
</object>
Now "printers.cfg" will be include in both the "billy" and "bob" objects.
You will have to be careful to not recursively include a file. Behaviour in this case is undefined.
COMMENTS
A comment starts with the number sign #, there can be any number of spaces and/or tab stops in front of the #.
A comment can also occur after a config statement. Example:
username = max # this is the comment
If you want to comment out a large block you can use C-style comments. A /* signals the begin of a comment block and the */ signals the end
of the comment block. Example:
user = max # valid option
db = tothemax
/*
user = andors
db = toand
*/
In this example the second options of user and db will be ignored. Please beware of the fact, if the Module finds a /* string which is the
start of a comment block, but no matching end block, it will ignore the whole rest of the config file!
NOTE: If you require the # character (number sign) to remain in the option value, then you can use a backslash in front of it, to escape
it. Example:
bgcolor = #ffffcc
In this example the value of $config{bgcolor} will be "#ffffcc", Config::General will not treat the number sign as the begin of a comment
because of the leading backslash.
Inside here-documents escaping of number signs is NOT required!
OBJECT ORIENTED INTERFACE
There is a way to access a parsed config the OO-way. Use the module Config::General::Extended, which is supplied with the Config::General
distribution.
VARIABLE INTERPOLATION
You can use variables inside your config files if you like. To do that you have to use the module Config::General::Interpolated, which is
supplied with the Config::General distribution.
EXPORTED FUNCTIONS
Config::General exports some functions too, which makes it somewhat easier to use it, if you like this.
How to import the functions:
use Config::General qw(ParseConfig SaveConfig SaveConfigString);
ParseConfig()
This function takes exactly all those parameters, which are allowed to the new() method of the standard interface.
Example:
use Config::General qw(ParseConfig);
my %config = ParseConfig(-ConfigFile => "rcfile", -AutoTrue => 1);
SaveConfig()
This function requires two arguments, a filename and a reference to a hash structure.
Example:
use Config::General qw(SaveConfig);
..
SaveConfig("rcfile", \%some_hash);
SaveConfigString()
This function requires a reference to a config hash as parameter. It generates a configuration based on this hash as the object-
interface method save_string() does.
Example:
use Config::General qw(ParseConfig SaveConfigString);
my %config = ParseConfig(-ConfigFile => "rcfile");
.. # change %config something
my $content = SaveConfigString(\%config);
CONFIGURATION AND ENVIRONMENT
No environment variables will be used.
SEE ALSO
I recommend you to read the following documents, which are supplied with Perl:
perlreftut Perl references short introduction
perlref Perl references, the rest of the story
perldsc Perl data structures intro
perllol Perl data structures: arrays of arrays
Config::General::Extended Object oriented interface to parsed configs
Config::General::Interpolated Allows to use variables inside config files
LICENSE AND COPYRIGHT
Copyright (c) 2000-2010 Thomas Linden
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
BUGS AND LIMITATIONS
See rt.cpan.org for current bugs, if any.
INCOMPATIBILITIES
None known.
DIAGNOSTICS
To debug Config::General use the Perl debugger, see perldebug.
DEPENDENCIES
Config::General depends on the modules FileHandle, File::Spec::Functions, File::Glob, which all are shipped with Perl.
AUTHOR
Thomas Linden <tlinden |AT| cpan.org>
VERSION
2.48
perl v5.12.1 2010-04-09 General(3)