lm-syslog-setup(8) [suse man page]

LM-SYSLOG-SETUP(8)					      System Manager's Manual						LM-SYSLOG-SETUP(8)

NAME

       /usr/sbin/lm-syslog-setup - configure laptop mode tools to switch syslog.conf based on power state

SYNOPSIS

       /usr/sbin/lm-syslog-setup

DESCRIPTION

       This  manual  page documents briefly the /usr/sbin/lm-syslog-setup command. lm-syslog-setup was a command to set up the necessary things to
       enable laptop mode to switch between different configuration files based on the power state. This feature and this command has been  depre-
       cated in favor of the configuration-file-control module, which is configured in the /etc/laptop-mode/conf.d/configuration-file-control.conf
       configuration file. This new module does not require any manual setup.  Existing configurations using the old feature are still	supported,
       however, new usages of the old feature are not allowed, and lm-syslog-setup has been disabled accordingly.

SEE ALSO

       laptop-mode.conf(8).

AUTHOR

       This  manual  page  was written by Bart Samwel (bart@samwel.tk) Permission is granted to copy, distribute and/or modify this document under
       the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.

																LM-SYSLOG-SETUP(8)

LAPTOP_MODE(8)						      System Manager's Manual						    LAPTOP_MODE(8)

NAME

       /usr/sbin/laptop_mode - apply laptop mode settings

SYNOPSIS

       /usr/sbin/laptop_mode [ cmd ] [ force ]

DESCRIPTION

       This  manual  page  documents  briefly  the  /usr/sbin/laptop_mode command. laptop_mode is a program that applies the settings given in the
       /etc/laptop-mode/laptop-mode.conf configuration file. The primary use is to control the laptop mode feature included in Linux kernels  with
       versions  2.6.6	and  higher,  and  2.4.23  and	higher.  This feature increases battery life by letting your hard drive spin down. This is
       achieved by grouping disk write activity into "chunks" that are spaced at larger intervals than they normally would be. In addition to sup-
       porting	the  Linux  kernel's  laptop  mode  feature, /usr/sbin/laptop_mode also supports various power saving modules which are configured
       through configuration files in the /etc/laptop-mode/conf.d directory.

       It is not recommended to call /usr/sbin/laptop_mode directly to start or stop laptop mode, except in hardware event handlers. To apply  new
       configuration settings from laptop-mode.conf, call the laptop-mode service init script with the reload parameter.

COMMANDS

       Specify force as the second parameter to force laptop_mode to re-apply a state even if the computer is already in that state. These are the
       values that are allowed for cmd :

       auto	 Enable or disable laptop mode based on the current power state. Note that this will not do anything if  the  laptop-mode  service
		 has not been started!

       status	 Display a status report about everything that laptop_mode affects.

SEE ALSO

       laptop-mode.conf(8).

AUTHOR

       This  manual  page was written by Bart Samwel (bart@samwel.tk) for the Debian system (but may be used by others).  Permission is granted to
       copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later  version  published	by
       the Free Software Foundation.

       On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.

																    LAPTOP_MODE(8)