PCIE_GET_READRQ(9) Hardware Interfaces PCIE_GET_READRQ(9)NAME
pcie_get_readrq - get PCI Express read request size
SYNOPSIS
int pcie_get_readrq(struct pci_dev * dev);
ARGUMENTS
dev
PCI device to query
DESCRIPTION
Returns maximum memory read request in bytes or appropriate error value.
COPYRIGHT Kernel Hackers Manual 2.6. July 2010 PCIE_GET_READRQ(9)
Check Out this Related Man Page
ARCMSR(4) BSD Kernel Interfaces Manual ARCMSR(4)NAME
arcmsr -- Areca Technology Corporation SATA/SAS RAID controller
SYNOPSIS
arcmsr* at pci? dev ? function ?
DESCRIPTION
The arcmsr driver provides support for the PCI-X and PCI Express RAID controllers from Areca Technology Corporation:
- ARC-1110 PCI-X 4 Port SATA RAID Controller
- ARC-1110ML PCI-X 4 Port SATA RAID Controller
- ARC-1120 PCI-X 8 Port SATA RAID Controller
- ARC-1120ML PCI-X 8 Port SATA RAID Controller
- ARC-1130 PCI-X 12 Port SATA RAID Controller
- ARC-1130ML PCI-X 12 Port SATA RAID Controller
- ARC-1160 PCI-X 16 Port SATA RAID Controller
- ARC-1160ML PCI-X 16 Port SATA RAID Controller
- ARC-1170 PCI-X 24 Port SATA RAID Controller
- ARC-1200 Rev A PCI Express 2 Port SATA RAID Controller
- ARC-1202 PCI Express 2 Port SATA RAID Controller
- ARC-1210 PCI Express 4 Port SATA RAID Controller
- ARC-1220 PCI Express 8 Port SATA RAID Controller
- ARC-1230 PCI Express 12 Port SATA RAID Controller
- ARC-1230ML PCI Express 12 Port SATA RAID Controller
- ARC-1231ML PCI Express 12 Port SATA RAID Controller
- ARC-1260 PCI Express 16 Port SATA RAID Controller
- ARC-1260ML PCI Express 16 Port SATA RAID Controller
- ARC-1261ML PCI Express 16 Port SATA RAID Controller
- ARC-1280 PCI Express 24 Port SATA RAID Controller
- ARC-1280ML PCI Express 24 Port SATA RAID Controller
- ARC-1680 PCI Express 8 Port SAS RAID Controller
- ARC-1680LP PCI Express 8 Port SAS RAID Controller
- ARC-1680i PCI Express 8 Port SAS RAID Controller
- ARC-1680x PCI Express 8 Port SAS RAID Controller
- ARC-1681 PCI-X 8 Port SAS RAID Controller
These controllers support RAID levels 0, 1, 1E, 3, 5, 6, and JBOD using either SAS or SATA II drives.
arcmsr supports management and monitoring of the controller through the bioctl(8) and envstat(8) commands.
Please note, however, that to use some features that require special privileges, such as creating/removing hot-spares, pass-through disks or
RAID volumes will require to have the password disabled in the firmware; otherwise a Permission denied error will be reported by bioctl(8).
When a RAID 1 or 1+0 volume is created, either through the bioctl(8) command or controller's firmware, the volume won't be accessible until
the initialization is done. A way to get access to the sd(4) device that corresponds to that volume without rebooting, is to issue the fol-
lowing command (once the initialization is finished):
$ scsictl scsibus0 scan any any
The arcmsr driver will also report to the kernel log buffer any error that might appear when handling firmware commands, such as used by the
bioctl(8) command.
EVENTS
The arcmsr driver is able to send events to powerd(8) if a volume or any drive connected to the volume is not online. The state-changed
event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8), scsictl(8)HISTORY
The arcmsr driver first appeared in NetBSD 5.0.
AUTHORS
The arcmsr driver was originally written for OpenBSD by David Gwynne. It was ported to NetBSD and extended by Juan Romero Pardines.
BSD March 3, 2008 BSD
Hi all,
I want to create a new user and grant him ONLY transfer files access to a specific directory where he can only upload and read the files. He should be restricted to this activity only.
Regards (6 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hi,
Last 2 weeks I have searched many forums and i haven't found the answer for the question:
How to get all command output to Putty title?
Needed it for other programs to know when some jobs on a server is done and is it done right or wrong. Plink stdout and stdin wasn't working, i used many... (1 Reply)
anyone have any idea how do to this with auth_attr?
I suspect if I grant him
solaris.device.:RO::Device Allocation::help=DevAllocHeader.html
that will work but I'm unsure. Just looking for a second opinion. (10 Replies)
I am looking for a stable, reliable system to replace my current Windows systems in the home. These are simple systems that I purchased from the local Big Box store.
I have heard many good things about Unix and it's various children and it sounds like a good option to me. I have worked... (2 Replies)
We have a lot of scripts using cut as :
cut -c 0-8 --works for cut (GNU coreutils) 5.97, but does not work for cut (GNU coreutils) 8.4.
Gives error -
cut: fields and positions are numbered from 1
Try `cut --help' for more information.
The position needs to start with 1 for later... (6 Replies)
I've got a problem with a proxy configuration. We have an LDAP group that lists all users who are authorised to use the proxy to FTP (usually Filezilla) out to the world, and by implication those not in the group should be denied. My users are delighted that this has been enabled and those that... (9 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello for all,
I am testing the behavior of a 32 bit application running on Solaris 5.10 (SPARC), and realize it reaches 4GB of memory and then crashes.
It doesn't matter the amount of used memory as application is intended to perform many transactions; rather, what I want to achieve is to... (2 Replies)