8.vi /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes -
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/md/dsk/d1 - - swap - no -
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
/dev/md/dsk/d3 /dev/md/rdsk/d3 /var ufs 1 no -
/dev/md/dsk/d4 /dev/md/rdsk/d4 /export/home ufs 2 yes -
swap - /tmp tmpfs - yes -
root@mitv-t-cons01 >
9.reboot
10. metastat --> this is where the problem comes,
seems the metastat output keep on 'looping' even after the resync period complete.
problems is it keep on looping on d3 and not even show the d4.
d30: Submirror of d3
State: Needs maintenance
Invoke: after replacing "Maintenance" components:
metareplace d3 d3 <new device>
Size: 16536000 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
d3 0 No Last Erred
****
after several reboots still having the same problem.
other information that might helps to solved this problem. pls tell me if i missed anything.
metadb
flags first blk block count
a m p luo 16 1034 /dev/dsk/c1t0d0s7
a p luo 1050 1034 /dev/dsk/c1t0d0s7
a p luo 2084 1034 /dev/dsk/c1t0d0s7
a p luo 16 1034 /dev/dsk/c1t1d0s7
a p luo 1050 1034 /dev/dsk/c1t1d0s7
a p luo 2084 1034 /dev/dsk/c1t1d0s7
looks like an error in the creaton of device d30. from your last output d30 is the physical device d3. this won't work. you should try a fresh start.
copy back the old /etc/vfstab and /etc/system file and reboot your machine. after that "metaclear" all devices and start again.
Hello Gurus,
I am setting up a V240 with solaris 10 for learning purpose. I have 4 x 36Gb disk installed and I now want to install SVM just tp learn this disk management utility. What I want to know is where do I look for the SVM pkg ?
is this the right command pkgchk -L SUNWsvm . Can anyone... (3 Replies)
Hi
I am new to live upgrade.
I would like to tell you about my new setup, where my boot disk(c0d0) is mirrored with secondary disk(c0d1). I have remove the secondary whole disk(C0d1) from the mirror, so that I can do live upgrade on this secondary disk.
I have done live upgrade on s0 partition... (3 Replies)
hi all
please help me with the following
i am new to solaris
i want to umount /test mount point and make it 8gb each i.e. /test1 and /test2 and using SVM wants to make RAID5
bash-3.00# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c0t0d0s0 6.9G ... (2 Replies)
Hi,
Is it possible to have a Solaris cluster of 2 nodes at SITE-A using SVM and creating metaset using say 2 LUNs (on SAN). Then replicating these 2 LUNs to remote site SITE-B via storage based replication and then using these LUNs by importing them as a metaset on a server at SITE-B which is... (0 Replies)
Greetings
How can i restore metastat db after a solaris upgrade (9 to 10)?
will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file?
root@netad# metastat
d35: Mirror
Submirror 0: d38
State: Okay
Submirror 1: d39
State: Okay
Pass:... (2 Replies)
Hi Guys!
I am facing Problem with SVM I mention the problem below:
I have Sunfire V210 machine and the partitions are as follows:
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 6134 29.77GB (6135/0/0) 62429760
1 swap wu ... (1 Reply)
HI,
I added by error to a submirror some disks :
metattach d53 c2t90d0s0 c2t90d1s0 ... instead of doing a stripe by disk (like that) :
metattach d53 c2t90d0s0
metattach d53 c2t90d1s0
..
then, I did a growfs -M to expand FS and the size isn't correct.
I tried to launch a... (1 Reply)
My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help.
I checked the log in /var/adm/message:
I also checked with the command iostat -nE. It returns:
Metastat returns the followings:
What should i do now?... (10 Replies)
Running Solaris 9 with SVM. I'm not that familiar with it, but metastat output gives "needs maintenance" message on 2 of the mirrors. There are no errors in /var/adm/messages. What do I need to do to fix this error? Thanks. (14 Replies)