Need printer driver for HP CP4525 on Solaris 10 SPARC
Hi Solaris 10 & possibly other Windows Gurus,
I am using hppi to setup IP based printers on Solaris 10 SPARC server but have always been having difficulty getting the exact driver for them. In this case it is for HP CP4525 series PCL6 so the only choice available was to choose the closest available driver which does the basic printing. In other word, it is not able to carry out specific commands to the printer such as addressing multiple trays (lp -d printer_queue -o tray1/upper...) properly. A workaround that also have mixed results is to setup a Windows XP/6.0 with Print Service for Unix but this setup with the following potential issues:
( i ) Windows printer queue would print to the wrong tray (possibly default on printer) despite having set to certain tray, yet a test print on the Windows side would print to the correct tray.
( ii ) Can no longer setup a Windows printer queue to be used to serve Unix printing even though I have had success on the same PC running Windows XP a while back
( iii ) Resourt to third-party software such as WRQ Reflection which came with Line Printer Daemon in their Reflection Server Manager from a very old version (7.5) does not always work either. Do I need to turn off Print Service for Unix before using WRQ Reflection Line Printer Daemon or not? I have tried with either or both installed yet only the existing printer queue CASHIERRCT/fin_carct would work.
Below aer the following error I am coming across after having created a remote printer queue on Solaris 10 SPARC server:
Note that it returns "Invalid printer". On the other hand, the following printer queue setup a few years back would not have the issue:
What puzzles me is that the remote_windows_host was able to return the correct CASHIERRCT as the remote printer queue yet not recognise appr06tray2 as a valid printer.
It has been quite a few years since setting up remote printer queues using Windows services and may have missed some steps during setup.
Your advice to help ocate the correct printer driver on Solaris 10 SPARC server, or a workaround outside or a combination would be much appreciated.
Many thanks,
George
should return more information (from /etc/printers.conf that Solaris uses).
Remote host connection usually is done with the old lpd protocol that does not support full control like tray selection. (Can be implemented as different queues on print server, or on application level.)
Your entries in /etc/inetd.conf have no effect (and on Solaris 10 inetd.conf is replaced by inetadm command).
How to Install New Model Script for HP printer driver on Solaris 10
Thanks MadeInGermany for your advice,
Unfortunately, lpstat -v does not work on my Solaris 10 SPARC version. It does not understand switch -v.
You are right that lpd doesn't support tray selection. As a result, I am looking for ways to update HP JetDirect Printer Installer for UNIX (vE.10.34) - Spooler Administration - Install New Model script, in the hope to find the correct matching printer driver HP LaserJet CP4525/2420dn.
Any advice on achieving this would be appreciated.
So I have a canon printer I'm trying to set it up I've gotten the driver from here;
wget -c http://gdlp01.c-wss.com/gds/1/0100005511/01/cnijfilter-mg7100series-4.00-1-rpm.tar.gz
I try and run the script thats below; But I know where i have to copy the driver too. I was wonder what file i have... (10 Replies)
I need a virtual open source printer that can print to a text file. I need this printer to be open source because i will have to include it with my distribution of a program i am building.
Just for a little background information, i am going to be building a program to run inside of a... (5 Replies)
I have a RHEL 4 (probably not important, but whatever) machine with a few dozen network printers set up in CUPS. I would like to replicate this on a second machine.
With lpinfo I'm able to get the queue name and device information (socket://ipaddress or whatnot), but I haven't get figured out... (0 Replies)
Just got an HP OfficeJet L7680 printer but there are no drivers for it in RHEL5. I just want to add the single driver without installing hplip 3.9.8. It's going to be connected with USB. Is this possible and if so how? (1 Reply)
Hi,
I have a Solaris 9 box that is connected to an Intermec EasyCoder 3400e tag printer. We set up the printer in solaris 9 using Jet Direct Admin console to use dump blotter address and the whole thing works fine. We are now moving from the Solaris 9 box to Solaris 10 box and Jet Direct Admin... (2 Replies)
Hi, I just installed the Fedora Core 3, and now my printer cannot work because the Fedora Core 3 cannot find a suitable printer driver for it. It did recognize the model of my printer but just can't get the right printer driver. I am new to Linux, really hope someone can help me fix this problem,... (4 Replies)
I am running a specialised program using a HP paintjet XL printer.
This printer is very old and ink cartriges are no longer available.
I want to use a HP 1102 C printer and need a driver.
Alternatively any A3 printer driver will do as long as the printer is still available.
Thanks
Louis (2 Replies)