Please can you help me on replacing or removing a faulty disk drive on a SUN NETRA X4250server with 4 internal drives only.
the format comand show me the following:
so I beleive drive 0. c0t0d0 <drive type unknown>is faulty.
Also in tail /var/adm/messagesshows:
this confims that the disk is faulty. metastatshows:
from the following command:
I beleive now I have to use the following:
From now on I am not quite what the following steps.
Please can you help
The "last Erred" means the d10 mirror is already degraded, and can have all types of data corruption.
I have no experience how to go from there. Hope you have a good data backup.
Yes, I still have a bad disk, but at the moment I dont have a new disk. I am stuck on the line that says that I have to remove any metadb on the failed disk!
How to identify the metadb on the failed disk. the failed disk is c0t0d0but the metadb command shows the following:
this does not show c0t0d0
Please help
Your c0t0d0 is not part of the SVM setup so therefore you don't need to remove it from SVM. But it may be part of dump device or swap, do dumpadm or swap -l
Hi All
BAsed on the below I would like to verifu two things
(1) The udnerlying mirroris for '/mnt' na dit onlcy contaisne 1 sub-mirror, with one sliceon is one disk and hence, data loss on the mount point (the mount point, '/mnt' is backed up)
(2) the Procedure for renewal
# df -kh /mnt... (2 Replies)
I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system
and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
The following is the summarry:-
1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced.
c1t0d0 and c1t2d0 are mirrors.
c1t1d0 and c1t3d0 are mirrors.
Metadb to be deleted is in c1t2d0s7
a) Mirror d35 has 2 submirrors d38 and d39
d38 is a stripe... (0 Replies)
Hi Gurus, I've got an issue here:
(1) Hardware: Sun NetraT1, (2) OS: Solaris 10, (3) SVM
metastat shows /var having 12 GB. df shows /var having 4 GB. Real space for /var is about 4 GB since I can't move a big file to it. How is 8 GB space missing? Does /var/run swap need to account? Can I... (5 Replies)
Hi all,
we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this?
In the past we have always kept slice 7 free -... (8 Replies)
Hi All,
I have to remove the disk from SVM.
Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion.
Thanks in anticipation! (10 Replies)
Hello,
Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do...
1. Remove the db replicas from the bad disk.
2. Detach it from the mirror
3. Clear it with... (4 Replies)
I dont even know what raid level this is, but its raid 5 mirrored from the looks of it.
I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the... (3 Replies)