I'm on OmniOS.
I have set a linux zone(lx zone) wich use 10.2.0.0/24 network.
The other network,connected to internet is 192.168.0.0/24
The network interface of 10.2.0.0/24 is bge1
The network interface of 192.168.0.0/24 is bge0
I know is more easy to use the same network but i prefer to separate two networks,one for virtual machines,one for home network.
I have setup the nat with this lines,firewall is ipfilter
The zone can ping external(even internet) and is ok
The problem is..I cannot reach the 10.2.0.0/24 from 192.168.0.0/24
network!
Firewall is simple
But when i ping from 192.168.0.0/24 to 10.2.0.0/24..don't ping.
ipnat said
If i deactive ipnat
I can ping,but not ssh into the lx zone.
And of course zone cannot ping or reach internet
edit1: ip forward is enabled.
Moderator's Comments:
Please use CODE tags (not ICODE tags) for full line and multi-line sample input, output, and code segments.
---------- Post updated 08-04-18 at 04:25 AM ---------- Previous update was 07-04-18 at 10:59 PM ----------
Solution found: iptables on linux client misconfigured
---------- Post updated at 11:30 AM ---------- Previous update was at 04:25 AM ----------
Solution found using this ipnat.conf,which enable nat external and permit ssh from external.
Last edited by Don Cragun; 04-08-2018 at 01:04 AM..
Reason: Change ICODE tags to CODE tags.
These 2 Users Gave Thanks to Linusolaradm1 For This Post:
I recently have become curious with Illumos distributions, at the present time, OmniOS. One thing I've come to expect is being able to simply type "man ls" for example to figure out how to use system tools. However, running man on OmniOS has provided nothing, nor does it seem to be available
... (4 Replies)
Howdy
My goal is to block locally the applications on a Solaris 10 server to access specific port on a remote machine. All attempts to access the <remote ip>:<remote port> should be rejected with ICMP port unreachable or with TCP RST.
I tried with the following:
block... (2 Replies)
For some reason ipfilter is blocking inbound fragmented ip packets (the packets are larger than the interface's MTU) that are encapsulating UDP segments. The connection works, so I know ipfilter is letting some traffic through, it is just a lot slower than it should be.
Rules that allow the... (3 Replies)
Hi everybody,
I'm running on Solaris 10 X86 (update 1009).
I would like to make NAT's rule. I explain you.
On Solaris, I configure the principal interface e1000g0 with IP : 192.168.0.33
I created the first logical interface like that :
ifconfig e1000g0 addif 192.168.0.40 netmask... (0 Replies)
Hello everyone. I have a problem with ipfilter, you must create a rule to redirect traffic from the external network to internal server on port 443. New Rule:
rdr e1000g0 from xx.xx.xx.69/32 port 443 -> 192.168.10.5 port 443 tcp,
use ipnat -CF -f /etc/ipnat.conf, and ipf send me from error:... (0 Replies)
Dears,
i am a new user for using ipfilter in solaris 10
and i have some question about this:
by using ipfilter
for example
1- i want specific MAC address able to access hotmail only
2- also i want to make 10MB for this MAC address is a max download per day
3- i am asking about using MAC... (0 Replies)
Hello,
| am trying to setup ipfilter on solaris express snv_91 but I don't seem to have the following file available.
/etc/ipf/pfil.ap
Is this an older way of configuring the interface?, I have all the packages installed.
Thanks, (1 Reply)
how can I create a rule that will allow my machine to FTP to itself, but not allow other machines to FTP to it.. I know this sounds weird but this how they want it so they can test some application functionality that uses ftp. (2 Replies)