02-09-2009
15,
0
Join Date: Dec 2007
Last Activity: 18 November 2012, 6:43 AM EST
Posts: 15
Thanks Given: 0
Thanked 0 Times in 0 Posts
hi,
You have given the output of ifconfig output
#ifconfig -a
lo0: flags=2001000849<up, LOOPBACK, RUNNING, MULTICAST, IPv4,
VIRTUAL> mtu 8232 index 1
zone zone
inet 127.0.0.1 netmask ff000000
hme0: flags=1000803<up, BROADCAST, MULTICAST, IPv4> mtu 1500 index 2
inet 192.168.35.20 netmask ffffff00 broadcast 192.168.35.255 ether 8:0:20:c5:61:68
hme0:1: flags=1000803<up, BROADCAST, MULTICAST, IPv4> mtu 1500 index 2 zone zone
inet 192.168.35.210 netmask ffffff00 broadcast 192.168.35.255
But in this output your ip is showing in Up status, But not in running status, for this you have to add default route through command
route add default 192.168.35.1
default gatway ask your network ok it may be 192.168.35.1
add this entry in cat /etc/defaultrouter like this
default 192.168.35.1
then only you will get the status is Running then only you can ping from one zone to another zone
after adding route entry in globle zone you can see default entry automatically in non-globle zone also ok
check the link is comming in server or not in NIC card