sane-xerox_mfp(5) [centos man page]

sane-xerox_mfp(5)					   SANE Scanner Access Now Easy 					 sane-xerox_mfp(5)

NAME

       sane-xerox_mfp - SANE backend for Xerox Phaser 3200MFP device

DESCRIPTION

       The sane-xerox_mfp library implements a SANE (Scanner Access Now Easy) backend that provides access to the following USB and network multi-
       function-peripheral:

	      Phaser 3200MFP
	      Dell MFP Laser Printer 1815dn
	      Xerox Phaser 6110MFP
	      Samsung CLX-3170fn & CLX-3175FW
	      Samsung SCX-4200
	      Samsung SCX-4300
	      Samsung SCX-4500
	      Samsung SCX-4500W
	      Samsung SCX4725-FN
	      Xerox WorkCentre 3119 Series

       If you own a scanner other than the ones listed above that works with this backend, please let us know this by sending the scanner's  exact
       model  name  and  the USB vendor and device ids (e.g. from /proc/bus/usb/devices, sane-find-scanner or syslog) to us. Even if the scanner's
       name is only slightly different from the models mentioned above, please let us know.

CONFIGURATION

       /etc/sane.d/xerox_mfp.conf USB scanners do not need any configuration.

       For SCX-4500W in network mode you need to specify

	      tcp host_address [port]

       The host_address is passed through resolver, thus can be a dotted quad or a name from /etc/hosts or resolvable through DNS.

FILES

       /etc/sane.d/xerox_mfp.conf
	      The backend configuration file. By default all scanner types/models are enabled, you may want to comment out unwanted.

       /usr/lib64/sane/libsane-xerox_mfp.a
	      The static library implementing this backend.

       /usr/lib64/sane/libsane-xerox_mfp.so
	      The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT

       SANE_DEBUG_XEROX_MFP If the library was compiled with debug support enabled, this environment variable controls the debug  level  for  this
       backend.  Higher debug levels increase the verbosity of the output.

       Example: export SANE_DEBUG_XEROX_MFP=4

AUTHOR

       Alex Belkin <abc@telekom.ru>

       Samsung SCX-4500W scan over network support Alexander Kuznetsov <acca(at)cpan.org>

BUGS
:
       Multicast autoconfiguration for LAN scanners is not implemented yet. IPv6 addressing never been tested.

SEE ALSO

       sane(7), sane-usb(5)

								    15 Dec 2008 						 sane-xerox_mfp(5)

sane-sm3600(5)						   SANE Scanner Access Now Easy 					    sane-sm3600(5)

NAME

       sane-sm3600 - SANE backend for Microtek scanners with M011 USB chip

DESCRIPTION

       The sane-sm3600 library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the Toshiba
       M011 custom USB chip.  This backend should be considered alpha.

       There are also backends for Microtek scanners with SCSI command set.  Refer to sane-microtek(5) and sane-microtek2(5) for details.

       At present, the following scanners are known positively to work with this backend:

	      Vendor	 Product id:	 Remark:
	      --------	 --------------  -----------
	      Microtek	 ScanMaker 3600  all modes ok
	      Microtek	 ScanMaker 3700  reported to work
	      Microtek	 ScanMaker 3750  reported to work

       If you own a Microtek scanner with the M011 chip other than the ones listed above, it may or may not work with SANE!

FRONTEND OPTIONS

       This backend dynamically enables the options for the frontend, that are supported by the scanner in dependence  of  the	scanning-mode  and
       other options. Not supported options are disabled.

       The following options are supported by the Microtek2-driver:

       Color, grayscale, halftone and lineart scans.

       contrast, brightness, control, gamma correction.

DEVICE NAMES

       This backend does not support device names in a standardized form.

CONFIGURATION

       This backend does not support a configuration file right now.

FILES

       /usr/lib64/sane/libsane-sm3600.a
	      The static library implementing this backend.

       /usr/lib64/sane/libsane-sm3600.so
	      The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT

       SANE_DEBUG_SM3600
	      If  the library was compiled with debug support enabled, this environment variable controls the debug level for this backend.  E.g.,
	      a value of 128 requests all debug output to be printed.  Smaller levels reduce verbosity.  To  see  error  messages  on  stderr  set
	      SANE_DEBUG_SM3600 to 1.

	      E.g. just say:
	      export SANE_DEBUG_SM3600=5

SEE ALSO

       sane-microtek2(5), http://sm3600.sourceforge.net

AUTHOR

       Marian Eichholz (eichholz@computer.org)
       Glenn Ramsey (glenn@componic.com)

								    14 Jul 2008 						    sane-sm3600(5)