YPBIND(8) ypbind-mt YPBIND(8)
NAME
ypbind - NIS binding process
SYNOPSIS
ypbind [-broadcast | -ypset | -ypsetme] [-c] [-f configfile] [-no-ping] [-broken-server] [-local-only] [-i | -ping-interval ping-interval]
[-r | -rebind-interval rebind-interval] [-d | -debug] [-v | -verbose] [-n | -foreground] [-p port] [-log log-options] [-no-dbus]
ypbind --version
ypbind --help
DESCRIPTION
ypbind finds the server for NIS domains and maintains the NIS binding information. The client (normally the NIS routines in the standard C
library) could get the information over RPC from ypbind or read the binding files. The binding files resides in the directory
/var/yp/binding and are conventionally named [domainname].[version]. The supported versions are 1 and 2. There could be several such files
since it is possible for an NIS client to be bound to more than one domain.
After a binding has been established, ypbind will send YPPROC_DOMAIN requests to the current NIS server at 20 seconds intervals. If it
doesn't get an response or the NIS server reports that he doesn't have this domain any longer, ypbind will search for a new NIS server. All
15 minutes ypbind will check to see if the current NIS server is the fastest. If it find a server which answers faster, it will switch to
this server. You could tell ypbind to use network broadcasts to find a new server, what is insecure, or you could give it a list of known
secure servers. In this case ypbind will send a ping to all servers and binds to first one which answers.
Unless the option -debug is used, ypbind detaches itself from the controlling terminal and puts itself into background. ypbind uses
syslog(3) for logging errors and warnings. At startup or when receiving signal SIGHUP, ypbind parses the file /etc/yp.conf and tries to use
the entries for its initial binding.
A broadcast entry in the configuration file will overwrite a ypserver/server entry and a ypserver/server entry broadcast. If all given
server are down, ypbind will not switch to use broadcast. ypbind will try at first /etc/hosts and then DNS for resolving the hosts names
from /etc/yp.conf. If ypbind couldn't reconfigure the search order, it will use only DNS. If DNS isn't available, you could only use
IP-addresses in /etc/hosts. ypbind could only reconfigure the search order with glibc 2.x. If the -broadcast option is specified, ypbind
will ignore the configuration file. If the file does not exist or if there are no valid entries, ypbind exit.
This ypbind version listens for DBUS messages from NetworkManager. If no NetworkManager is running at startup, ypbind will behave as usual
and assumes there is a working network connection. If NetworkManager is running on the system, ypbind will only search and provide NIS
informations, if NetworkManager tells that a network connection is available. If NetworkManager establishes a connection, ypbind will
reread all configuration files, registers at the local portmapper and try to search NIS servers. If NetworkManager drops a connection,
ypbind will unregister from portmapper.
In Fedora we use systemd for starting services. We need to finish starting process of ypbind service not before service is fully started,
which means ypbind daemon is prepared to answer. There is a test script /usr/libexec/ypbind-post-waitbind used in ypbind.service, that
waits for ypbind daemon to be fully connected to NIS server and waits by default up to 45s. Sometimes this is not enough, because network
set up can take longer than 45s during boot, so starting ypbind.service fails. User can increase the timeout by setting an environment
variable NISTIMEOUT in /etc/sysconfig/ypbind. For example NISTIMEOUT=180 means ypbind will wait up to 180 seconds for binding to a NIS
server. Another option is to enable NetworkManager-wait-online.service and add an ordering rule into ypbind.service, ideally by creating
/etc/systemd/system/ypbind.service with the following content:
.include /lib/systemd/system/ypbind.service
[Service]
After=NetworkManager-wait-online.service
OPTIONS
-broadcast
Send a broadcast to request the information needed to bind to a specific NIS server. With this option, /etc/yp.conf will be ignored.
-ypset
Allow root from any remote machine to change the binding for a domain via the ypset(8) command. By default, no one can change the
binding. This option is really insecure. If you change a binding for a domain, all the current known servers for this domain will be
forgotten. If the new server goes down, ypbind will use the old searchlist.
-ypsetme
The same as -ypset, but only root on the local machine is allowed to change the binding. Such requests are only allowed from loopback.
-c
ypbind only checks if the config file has syntax errors and exits.
-d, -debug
starts ypbind in debug mode. ypbind will not put itself into background, and error messages and debug output are written to standard
error.
-n, -foreground
ypbind will not put itself into backgroun.
-v, -verbose
Causes ypbind to syslog(2) any and all changes in the server its bound to.
-broken-server
Lets ypbind accept answers from servers running on an illegal port number. This should usually be avoided, but is required by some
ypserv(8) versions.
-no-ping
ypbind will not check if the binding is alive. This option is for use with dialup connections to prevent ypbind from keeping the
connection unnecessarily open or causing auto-dials.
-f configfile
ypbind will use configfile and not /etc/yp.conf
-local-only
ypbind will only bind to the loopback device and is not reachable from a remote network.
-p port
Lets ypbind listen on a specified port number, rather than asking portmapper to assing a port for it.
-i, -ping-interval ping-interval
The default value for ypbind to check, if a NIS server is still reachable, is 20 seconds. With this options another frequency in
seconds can be specified.
-r, -rebind-interval rebind-interval
The default value for ypbind to search for the fastest NIS server is 900 seconds (15 minutes). With this options another frequency in
seconds can be specified.
-log log-options
Allows to log special events. log-options is a logical sum of values for particular events - 1 for logging rpc calls, 2 for logging
broken server calls, 4 for logging server changes.
-no-dbus
Disables DBUS support if compiled in.
--version
Prints the version number
FILES
/etc/yp.conf
configuration file.
/var/yp/binding/[domainname].[version]
binding file containing information about each NIS domain.
/var/run/ypbind.pid
contains the process id of the currently running ypbind master process.
SEE ALSO
syslog(3), domainname(1), yp.conf(5), ypdomainname(8), ypwhich(1), ypserv(8), ypset(8)
AUTHOR
ypbind-mt was written by Thorsten Kukuk <kukuk@thkukuk.de>.
ypbind-mt 04/09/2013 YPBIND(8)