aefind(1) aefind(1)
NAME
aefind - search for files in directory hierarchy
SYNOPSIS
aefind [ option... ] path... expression
aefind -Help
aefind -VERSion
DESCRIPTION
The aefind command is used to search the combined directory tree of a change and its project. It is intentionally similar to find (1),
however it unifies the directory stack of a change and its branch baseline, and the branch's ancestors' baselines if any.
For each file found in the directory tree, the given expression is evaluated from left to right, according to the rules of precedence (see
the section on OPERATORS, below), only until the outcome is known, at which point aefind moves on to the next file name.
If no directory is named on the command line, the current directory is assumed.
Files which have been removed from the project, even if they somehow remain in the directory tree, will not be reported.
OPTIONS
The following options are understood:
-BaseLine
This option may be used to specify that the project baseline is the subject of the command.
-BAse_RElative
This option may be used to cause relative filenames to be considered relative to the base of the source tree. See aeuconf(5) for
the corresponding user preference.
-CUrrent_RElative
This option may be used to cause relative filenames to be considered relative to the current directory. This is usually the
default. See aeuconf(5) for the corresponding user preference.
-Change number
This option may be used to specify a particular change within a project. See aegis(1) for a complete description of this option.
-Help
This option may be used to obtain more information about how to use the aefind program.
-Project name
This option may be used to select the project of interest. When no -Project option is specified, the AEGIS_PROJECT environment
variable is consulted. If that does not exist, the user's $HOME/.aegisrc file is examined for a default project field (see aeu-
conf(5) for more information). If that does not exist, when the user is only working on changes within a single project, the
project name defaults to that project. Otherwise, it is an error.
-Resolve
This option may be used to request that filenames be absolute paths, referring to the fully resolved file name. This is the
default.
-No_Resolve
This option may be used to request that filenames be base relative names, relative to the root of the "stacked" directory tree.
-Verbose
This option may be used to request that the expression be printed again on the standard output. This is the expression as under-
stood by aefind, to assist you in ensuring that you and the command agree. The expression is fully parenthesized, and all
implicit operators made explicit. Where possible, constant expressions will have been folded.
See also aegis(1) for options common to all aegis commands.
All options may be abbreviated; the abbreviation is documented as the upper case letters, all lower case letters and underscores (_) are
optional. You must use consecutive sequences of optional letters.
All options are case insensitive, you may type them in upper case or lower case or a combination of both, case is not important.
For example: the arguments "-project, "-PROJ" and "-p" are all interpreted to mean the -Project option. The argument "-prj" will not be
understood, because consecutive optional characters were not supplied.
Options and other command line arguments may be mixed arbitrarily on the command line, after the function selectors.
The GNU long option names are understood. Since all option names for aefind are long, this means ignoring the extra leading '-'. The
"--option=value" convention is also understood.
EXPRESSIONS
The expression is made up of basic elements, tests (which return a true or false value), and actions (which have side effects and return a
true or false value), all separated by operators.
BASIC ELEMENTS
{} The value of this expression is the file name of the file currently being considered. The value is affected the the -Resolve
option.
{-} The value of this expression is the file name of the file currently being considered, relative to the base of the directory stack.
{+} The value of this expression is the absolute path of the file currently being considered.
number Numbers may be specified directly, for use with other tests and operators. In the style of C, they may be hexadecimal with a "0x"
prefix, octal with a "0" prefix, or decimal otherwise.
string Strings may be specified directly, for use with other tests and operators. If the string contains shell meta-characters, you may
need to quote it.
-FAlse The value of this expression is always false.
-NOW The value of this expression is the current time, at the start of execution.
-TRue The value of this expression is always true.
OPERATORS
The -and operator is assumed where the operator is omitted. You will need to quote many of the operators, to protect them from interpre-
tation by the shell. Each operator must be a separate command line argument.
( expr )
Force precedence.
+ expr Unary plus. Is is an error if the argument cannot be coerced to a number.
- expr Unary minus. Result is the numeric negative of the argument. Is is an error if the argument cannot be coerced to a number.
! expr Logical negation of the sense of the expression. Is is an error if the argument cannot be coerced to a boolean.
Synonym: -Not
~ expr Bitwise not of the argument. Is is an error if the argument cannot be coerced to an integer.
expr1 * expr2
This operation multiplies the two values. Is is an error if the arguments cannot be coerced to numbers.
expr1 / expr2
This operation divides the argument value by the second. Is is an error if the arguments cannot be coerced to numbers. Is is an
error if the second argument is zero.
expr1 % expr2
This operation produces the remainder of the division of the first argument by the argument. Is is an error if the arguments can-
not be coerced to numbers. Is is an error if the second argument is zero.
expr1 ~ expr2
Is is an error if the arguments cannot be coerced to strings. Is is an error if the first argument is not a valid pattern. The
first argument is the pattern, and the second is the string The result is true if the pattern matches, and false if it does not.
This operation performs a shell file pattern comparison. to be compared.
expr1 + expr2
This operation adds the two values. Is is an error if the values cannot be coerced to numbers.
expr1 - expr2
This operation subtracts the second values from the first. Is is an error if the values cannot be coerced to numbers.
expr1 ## expr2
This operation concatenates the arguments. Is is an error if the arguments cannot be coerced to strings. (Note: this is not the
same as the : operator of the expr(1) command.)
expr1 << expr2
Shift the first argument left by the number of bits specified by the second argument. The left argument is treated as an unsigned
number. Is is an error if the values cannot be coerced to numbers.
expr1 >> expr2
Shift the first argument right by the number of bits specified by the second argument. The left argument is treated as an
unsigned number. Is is an error if the values cannot be coerced to numbers.
expr1 < expr2
Compare the values and produce true if the first value is less than the second value, false otherwise. If both values can be
coerced to numbers, the comparison is numeric; if both values can be coerced to strings, the comparison is lexicographic; other-
wise is it an error.
expr1 <= expr2
Compare the values and produce true if the first value is less than or equal to the second value, false otherwise. If both values
can be coerced to numbers, the comparison is numeric; if both values can be coerced to strings, the comparison is lexicographic;
otherwise is it an error.
expr1 > expr2
Compare the values and produce true if the first value is greater than the second value, false otherwise. If both values can be
coerced to numbers, the comparison is numeric; if both values can be coerced to strings, the comparison is lexicographic; other-
wise is it an error.
expr1 >= expr2
Compare the values and produce true if the first value is greater than or equal to the second value, false otherwise. If both
values can be coerced to numbers, the comparison is numeric; if both values can be coerced to strings, the comparison is lexico-
graphic; otherwise is it an error.
expr1 == expr2
Compare the values and produce true if the first value is equal to the second value, false otherwise. If both values can be
coerced to numbers, the comparison is numeric; if both values can be coerced to strings, the comparison is lexicographic; other-
wise is it an error.
expr1 != expr2
Compare the values and produce true if the first value is not equal to the second value, false otherwise. If both values can be
coerced to numbers, the comparison is numeric; if both values can be coerced to strings, the comparison is lexicographic; other-
wise is it an error.
expr1 & expr2
This operation produces the bitwise-and of the two values. Is is an error if the values cannot be coerced to numbers.
expr1 | expr2
This operation produces the bitwise-or of the two values. Is is an error if the values cannot be coerced to numbers.
expr1 && expr2
Result is true if both expressions are true. Short circuit evaluation is used, and so expr2 is not evaluated if expr1 is false.
Is is an error if the arguments cannot be coerced to booleans.
Synonym: -And
expr1 expr2
Logical and (implied). Result is true if both expressions are true. Short circuit evaluation is used, and so expr2 is not evalu-
ated if expr1 is false. Please note that implicit operator plays merry hell with operator precedence, because there is no opera-
tor. If you are getting odd results, use explicit operators.
expr1 || expr2
Result is true if either expression is true. Short circuit evaluation is used, and so expr2 is not evaluated if expr1 is true.
Is is an error if the arguments cannot be coerced to booleans.
Synonym: -Or
expr1 ? expr2 : expr3
The value of this expression is expr2 if expr1 is true, and expr3 otherwise. The expr1 is always evaluated, but only one of expr2
or expr3 will be evaluated. It is an error if the value of expr1 cannot be coerced to boolean.
expr1 , expr2
Both expr1 and expr2 are always evaluated. The value of expr1 is discarded; the value of the expression is the value of expr2.
Operators have precedence as described by the following table, highest to lowest:
+----------------------------+
| Operator Direction |
+----------------------------+
|(unary) + - ~ ! <- |
|* / % ~ -> |
|+ - : -> |
|<< >> -> |
|< <= > >= -> |
|== != -> |
|& -> |
|^ -> |
|| -> |
|&& -> |
||| -> |
|? : -> |
|, -> |
+----------------------------+
FUNCTIONS
There are a number of built-in functions which may be used in the expression. Functions may be invoked using a syntax similar to C func-
tions.
name ( arguments )
You need to leave spaces around the parentheses so that they are separate command line arguments.
atime This function may be used to determine the last-accessed-time of a file. It takes one argument.
basename
This function returns the basename of the string argument passed to it. It takes one argument.
ctime This function may be used to determine the last-change-time of an inode. It takes one argument.
execute This function may be used to execute a command. The arguments are assembled into the command to be executed. Use the special
"{}" argument to insert the name of the current file. The function returns true of the command's exist status is zero. All fol-
lowing arguments to find are taken to be arguments to the command until an argument consisting of `;' is encountered. The
command is executed in the starting directory.
gid This function may be used to determine the gid of a file. It takes one argument.
inode This function may be used to determine the inode number of a file. It takes one argument.
mode This function may be used to determine the access mode (permissions) of a file. It takes one argument.
mtime This function may be used to determine the last-modified-time of a file. It takes one argument.
print This function may be used to print a value. It takes one argument. Always returns true.
size This function may be used to determine the size in bytes of a file. It takes one argument.
type This function may be used to determine the type of a file. It takes one argument. It returns a string: "block_special", "charac-
ter_special", "directory", "file", "named_pipe", "socket" or "symbolic_link".
uid This function may be used to determine the uid of a file. It takes one argument.
TESTS
Most tests exist to provide compatibility with find(1).
-Access_Minutes [ relative-operator ] number
True if the current file was accessed exactly number minutes ago, false otherwise. If a relative operator is given (<, <=, ==,
!=, > or >=) a relative comparison will be made, rather than the implicit equality test. This is not identical to the similar
find(1) test. This is shorthand for the "( now - atime ( {+} )) / 60 relative-operator number" expression.
-Access_Time [ relative-operator ] number
True if the current file was accessed exactly number days ago, false otherwise. If a relative operator is given (<, <=, ==, !=, >
or >=) a relative comparison will be made, rather than the implicit equality test. This is not identical to the similar find(1)
test. This is shorthand for the "( now - atime ( {+} )) / 86400 relative-operator number" expression.
-Change_Minutes number
True if the current file's inode was changed exactly number minutes ago, false otherwise. If a relative operator is given (<, <=,
==, !=, > or >=) a relative comparison will be made, rather than the implicit equality test. This is not identical to the similar
find(1) test. This is shorthand for the "( now - ctime ( {+} )) / 60 relative-operator number" expression.
-Change_Time number
True if the current file's inode was changed exactly number days ago, false otherwise. If a relative operator is given (<, <=,
==, !=, > or >=) a relative comparison will be made, rather than the implicit equality test. This is not identical to the similar
find(1) test. This is shorthand for the "( now - ctime ( {+} )) / 86400 relative-operator number" expression.
-Modify_Minutes number
True if the current file was modified exactly number minutes ago, false otherwise. If a relative operator is given (<, <=, ==,
!=, > or >=) a relative comparison will be made, rather than the implicit equality test. This is not identical to the similar
find(1) test. This is shorthand for the "( now - mtime ( {+} )) / 60 relative-operator number" expression.
-Modify_Time number
True if the current file was modified exactly number days ago, false otherwise. If a relative operator is given (<, <=, ==, !=, >
or >=) a relative comparison will be made, rather than the implicit equality test. This is not identical to the similar find(1)
test. This is shorthand for the "( now - mtime ( {+} )) / 86400 relative-operator number" expression.
-Newer filename
True if the current file was modified after the given file. This is shorthand for the "mtime ( {+} ) > mtime ( filename )"
expression.
-Name pattern
Base of file name (the path with the leading directories removed) matches shell pattern pattern. This is short-hand for the "pat-
tern ~ basename ( {} )" expression.
-PAth pattern
File name matches shell pattern pattern. Note that the file name if affected by the -resolve option. This is short-hand for the
"pattern ~ {}" expression.
-Type string
The file type matches the type given. This is shorthand for the "type ( {} ) == string" expression. Type names are matched simi-
lar to options:
Block The file is a block special file.
Character The file is a character special file.
Directory The file is a directory.
File The file is a normal file.
Link The file is a symbolic link.
Pipe The file is FIFO (a named pipe).
Socket The file is a UNIX domain socket.
ACTIONS
-print This will print the full file name on the standard output, followed by a newline. The -Resolve option will affect what is
printed. This is short-hand for the "print ( {} )" expression.
-execute string... ;
The may be used to execute a command. This is short-hand for the "execute ( string : ... )" expression.
EXIT STATUS
The aefind command will exit with a status of 1 on any error. The aefind command will only exit with a status of 0 if there are no
errors.
ENVIRONMENT VARIABLES
See aegis(1) for a list of environment variables which may affect this command. See aepconf(5) for the project configuration file's
project_specific field for how to set environment variables for all commands executed by Aegis.
COPYRIGHT
aefind version 4.24.3.D001
Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter
Miller
The aefind program comes with ABSOLUTELY NO WARRANTY; for details use the 'aefind -VERSion License' command. This is free software and
you are welcome to redistribute it under certain conditions; for details use the 'aefind -VERSion License' command.
AUTHOR
Peter Miller E-Mail: millerp@canb.auug.org.au
//* WWW: http://www.canb.auug.org.au/~millerp/
Reference Manual Aegis aefind(1)