rlpq(1) [debian man page]

rlpq(1) 						       UNIX Reference Manual							   rlpq(1)

NAME

       rlpq - remote line printer queue examination program

SYNOPSIS

       rlpq [-lmqNV] [-Hprinthost] [-Pprinter] [-Xproxyhost] [--debug] [--timeout=seconds] [--port=port] [ job # ... ] [ username ... ]

DESCRIPTION

       rlpq  uses  TCP/IP to examine print queues for printers anywhere on a network.  Unlike lpq, it does not require that the remote printers be
       explicitly known to the local system (traditionally through /etc/printcap), and thus is considerably more flexible and requires less admin-
       istration.

       rlpq  can  be  used  anywhere a traditional lpq might be used, and is backwards compatible with traditional BSD lpq.  If rlpq is invoked as
       lpq, it preserves all known lpq semantics.

       rlpq can be set up, installed, and used in the same two ways as rlpr(1) (that is, either  with  or  without  the  rlprd(8)  proxy  daemon).
       Please see rlpr(1) for details, and to see whether you will need to use the rlprd(8) proxy daemon or not.

OPTIONS

   Environment/Setup
       --debug
	      Print gobs of debugging information.

       -N, --no-bind
	      Don't  try  to bind to privileged port before connecting to lpd.	Please see the CONFIGURING A PROXY section in rlpr(1) for informa-
	      tion on use of this option.

       --port=number
	      Select an alternate port (instead of 7290) to connect to, if using rlprd.  Usually not needed.

       -H, --printhost=host
	      Select the host to print to (used with -P).

	      Instead of using -H, one can specify the hostname directly including it with the printer name with the printer@hostname syntax.

       -P, --printer=printername, --queue=printername
	      Select the printer to print to (used with -H).

       -X, --proxy=proxyhost, --proxyhost=proxyhost
	      Select the proxy host to use, if necessary.

       --timeout=seconds
	      Set the inactivity timer.  If the connection hangs for more than seconds seconds, then rlpq will give up.   Use  the  special  value
	      `-1' to wait forever.  Default timeout is 3 seconds.

       -V, --version
	      Print version and exit.

   Behavior
       -l, --long
	      Produce a more detailed report.

       -m, --mine
	      List only the jobs belonging to you.

       -q, --quiet, --silent
	      Quiet mode - stay quiet (except for fatal errors).  When this flag is set, rlpq's return value indicates whether there are any items
	      in the specified queue that meet the specified criteria (a return value of zero indicates success).

ENVIRONMENT VARIABLES

       The following environment variables are used by rlpq:

       RLPR_PRINTHOST
	      Specifies the default host's queue to examine.

       PRINTER or LPDEST
	      Specifies the default printer to check on the host.
	      First PRINTER is consulted, then LPDEST.

	      Note that one can also specify the host to examine by setting printer to be printer@hostname.  This may be more convenient than set-
	      ting RLPR_PRINTHOST, but will confuse the traditional BSD print commands.

       RLPR_PROXYHOST
	      Specifies a proxy host to use, if necessary.

FILES

       ~/.rlprrc	 Personal printer/host database
       /etc/hosts.lpd	 Host-based security on printhost
       /etc/hosts.equiv  Host-based security on printhost
       /etc/passwd	 Personal identification
       /etc/rlprrc	 System-wide printer/host database

SEE ALSO

       rlpr(1), rlprm(1), rlprd(8), rlprrc(5)

AUTHOR

       meem <meem@gnu.org>

BUGS 
/ LIMITATIONS
       Due to the dynamic nature of print queues, it is possible that the actual state of the queue may have changed between the time the snapshot
       was generated and the output was produced.

rlpr 2.04							    1999/10/28								   rlpq(1)

Check Out this Related Man Page

rlprrc(5)						       UNIX Reference Manual							 rlprrc(5)

NAME

       rlprrc - remote printing resource file

DESCRIPTION

       The  rlprrc  configuration  file is consulted by the remote printing commands (rlpr(1), rlpq(1), and rlprm(1)) to resolve a printqueue or a
       hostname. It can be used to either lookup a printqueue (printer) for a given host, or a host for a given printqueue.  If both  the  printer
       and the printhost are known, this file is never consulted.

       Initially,  the	remote printing commands look for the file .rlprrc in the user's home directory.  If that file cannot be found or does not
       provide the information necessary to resolve the query, then the system-wide /etc/rlprrc is consulted (if present).  If resolution is still
       unsuccessful, the command fails.

       There is one entry per line - each line has the format:

       hostname: printer1 printer2 ... printerN

       Which  indicates  that  host hostname has printers printer1 printer2 ... printerN available.  In the case where the remote printing command
       knows the host to print to but does not know which printer to use on that host, the first one (printer1 here) will be used.

       In the case where the remote printing command knows the printqueue (printer) to print to but does not know what host has  that  queue,  the
       last  host  which has the specified printqueue is used.	If this behavior is not acceptable, you can force a certain host to always be used
       for a certain printqueue by putting a ! after the printqueue name.

       For example, an .rlprrc file containing:

	      foo.baz.org: litho laserjet4!
	      foo.bar.org: laserjet4 lineprinter

       will always resolve the printqueue laserjet4 to foo.baz.org no matter what other hosts have a printqueue named laserjet4.

       The rlprrc file is only consulted in situations where a printqueue or hostname needs to be resolved.  It is provided only  for  convenience
       and is not required.

SEE ALSO

       rlpr(1), rlpq(1), rlprm(1), rlprd(8)

AUTHOR

       meem <meem@gnu.org>

rlpr 2.04							    1999/10/28								 rlprrc(5)

Linux and UNIX Man Pages

rlpq(1) [debian man page]

Check Out this Related Man Page