stable(1) [debian man page]
stable(1) stable(1) NAME
stable - MO Hessian stability analysis program DESCRIPTION
The program stable performs a stability analysis on the molecular orbitals by diagonalizing the molecular orbital Hessian. The analysis includes orbital rotations which may break spin or spatial symmetry. If an instability is detected (i.e., there are negative eigenvalues of the MO Hessian), the previous Hartree-Fock self consistent field (SCF) computation has landed on a local minimum, not the global mini- mum, in orbital rotation space. For spatial- or symmetry-breaking rotations, this merely means that there is another orbital occupation or a UHF wavefunction with a lower energy. For instabilties which preserve the reference type (RHF or UHF) and are totally symmetric, this suggests that the SCF computation has simply found the wrong solution and should be re-run using a new initial guess. Instabilities corresponding to spatial symmetry breaking rotatios can be resolved by re-running the calculation in a lower computational point group. (It may also be necessary to employ some trick to break the symmetry of the initial guess wavefunction). Instabilities cor- responding to spin symmetry breaking rotations (RHF->UHF) can be resolved by re-running the SCF using a UHF reference. For UHF wavefunctions with totally-symmetric instabilities, it is possible to follow the instability automatically toward the global mini- mum by setting FOLLOW=TRUE. INPUT FORMAT
Input for this program is read from the file The following keywords are valid: CACHELEV = integer This is the cache level used for the DPD files. It functions the same way as in the coupled-cluster codes. Currently, this is hardwired to 0. FOLLOW = boolean If TRUE, then the eigenvector corresponding to the most negative eigenvalue of the MO Hessian will be followed to try to find a lower energy Hartree-Fock solution. The orbitals will be rotated, and the cscf module should be re-run using these new guess orbitals. NUM_EVECS_PRINT = integer Gives the number of MO Hessian eigenvectors to print. PRINT = integer The print level determines how much information is printed by the program. Values typically range from 1 (minimal printing) to 5 (very verbose printing for debugging only). The default is 1. REFERENCE = string This is the reference type, RHF, ROHF, or UHF. The default is RHF. SCALE = real This is the scale factor used for taking steps in eigenvector following. Normal values would be between 0 and 1. The default is 0.5. 23 Aug, 2003 stable(1)
Check Out this Related Man Page
cscf(1) cscf(1) NAME
cscf - solves the Hartree-Fock equations DESCRIPTION
The program cscf carries out the iterative procedure to solve the Hartree-Fock equations. This program is restricted to D2h symmetry and its subgroups and the orbital occupations are required to be integers. Thus, certain pure angular momentum states derived from partial occupation of degenerate orbitals cannot be obtained with the present codes. For example, the 2PIu (doublet PI u) state of linear O-N-O derived from the lowest energy linear (pi u)1 configuration may only be computed as the 2B2u (doublet B2u) or 2B3u (doublet B 3u) component of the 2PIu (doublet PI u) state, and the resulting spatial wavefunction will not have PI symmetry. In a certain sense, however, this is desirable, as the energy will be a continuous function of the bending angle. Calculating the energy of bent configurations as 2B2u (doublet B 2u) or 2B3u (doublet B 3u) and doing a pure 2PIu (doublet PI u) state at linear geome- tries results in a pronounced discontinuity. For the most part, triplet states resulting from double occupation of a doubly degenerate orbital, such as the 3A2 (triplet A 2) state resulting from the (e')2 or (e")2 configurations in D3h symmetry, or the 3SIGMAg (triplet SIGMA g) state of a (pi g)2 or (pi u)2 configura- tion in Dinfh (D infinity h) symmetry, will have the proper spatial symetry. The singlet states resulting from these same electronic con- figurations are inherently multiconfiguration and, as such, are not well represented by single configuration wavefunctions. REFERENCES
PK-file method: 1. R. C. Raffenetti, Chem. Phys. Lett. 20 (1973) 335. Molecular symmetry and closed shell HF calculations: 1. M.Dupuis, and H.F.King, Int. J. Quant. Chem. 11 (1977) 613. DIIS for closed shell: 1. P. Pulay, Chem. Phys. Lett. 73 (1980) 393. 2. P. Pulay, J. Comp. Chem. 3 (1982) 556. Coupling coefficients (alpha and beta) for open shell: 1. C. C. J. Roothaan, Rev. Mod. Phys. 32 (1960) 179. Damping: 1. D. R. Hartree, "The Calculation of Atomic Structures" (Wiley: New York) 1957. 2. M. C. Zerner and M. Hehenberger, Chem. Phys. Lett. 62 (1979) 550. Level shifting: 1. V. R. Saunders and I. H. Hillier, Int. J. Quant. Chem. 7 (1973) 699. CONVERGING CSCF
For difficult open shell cases, it is recommended that an appropriate closed shell calculation be run first (add or remove an extra elec- tron) and that this SCF vector then be used as a guess for the desired open shell wavefunction. For TCSCF cases, it is always wise to run a closed shell (or perhaps the appropriate triplet) SCF first and then use this as a guess for the TCSCF. For open shell systems, a level shift value of 0.5 to 3.0 is recommended. Start with a high value (2.0 - 3.0) for the first SCF calcula- tion and then reduce it (to 0.5 - 1.0) for subsequent runs which use a converged SCF vector as the starting point. It is extremely important to note that this version of the code no longer supports OPENTYPE. One must use the new keywords REFERENCE and MULTP to specify the type of SCF needed. INPUT FORMAT
The cscf program searches through the default keyword path (first SCF and then DEFAULT) for the following keywords: LABEL = string This is a character string to be included in the output. This string is not used by the program. There is no default. WFN = string This is the type of wavefunction which is ultimately desired. The default is SCF. OPENTYPE is no longer supported REFERENCE = string This specifies the type of SCF calculation one wants to do. It can be one of RHF (for a closed shell singlet), ROHF (for a restricted open shell calculation), UHF (for an unrestricted open shell calculation), TWOCON (for a two configuration singlet), or SPECIAL. If SPECIAL is given, then alpha and beta coupling coefficients must be given with the ALPHA and BETA keywords. The default is RHF. MULTP= integer Specifies the multiplicity of the molecule. Default is singlet. CHARGE= integer Specifies the charge of the molecule. Defauly is 0. DOCC = integer_vector This gives the number of doubly occupied orbitals in each irreducible representation. There is no default. If this is not given, CSCF will attempt to guess at the occupations using the core hamiltonian. SOCC = integer_vector This gives the number of singly occupied orbitals in each irreducible representation. There is no default. DERTYPE = string This specifies the order of derivative that is to eventually be done. It is used by the scf program to determine if certain files are to be written and it is also used to determine the default convergence of the wavefunction. The default is FIRST. MAXITER = integer This gives the maximum number of iterations. The default is 40. CONVERGENCE = integer This specifies how tightly the wavefunction will be converged. Convergence is determined by comparing the RMS change in the density matrix ("delta P") to the given value. The convergence criterion is 10**(-integer). The default is 7 if both DERTYPE = NONE and WFN = SCF are given and 10 otherwise. LEVELSHIFT = real This specifies the level shift. The default is 1. DIRECT = boolean Specifies whether to do the SCF calculation with an integral direct technique. The default is false. PRINT_MOS = boolean Specifies whether to print the molecular orbitals or not. The default is false. There are also a large number of less commonly used input parameters. If you do not understand what the following options mean, then make sure that they do not appear in your input. The defaults will work in the overwhelming majority of cases. These are specified with the following keywords: DELETE_INTS = boolean Integrals files will be erased if WFN = SCF and DERTYPE = FIRST or DERTYPE = NONE. If you wish to keep integrals files then set DELETE_INTS = false. The default is true. REORDER = string The parameter controls reordering of molecular orbitals. If set to BEFORE then the guess orbitals from checkpoint file will be reordered. If set to AFTER, converged orbitals will be reordered before being written to the checkpoint file. In either case MOORDER parameter must be given to specify the reordering map. The default is not to reorder orbitals. MOORDER = integer_vector This specifies a molecular orbital reordering vector. It will only be used if REORDER is set. This vector maps every orbital to its new index, e.g. MOORDER = (0 2 1) specifies that after reordering orbitals 1 and 2 will be swapped. The rank of this vector is the same as the number of MOs. The indices are in Pitzer order (ordered by symmetry, then by energy within each symmetry block), base-0. CSCF will likely fail if the given MOORDER mixes orbitals from different irreps. There is no default. ALPHA = real_vector If OPENTYPE = SPECIAL, then this parameter gives the alpha coupling coefficients. The number of elements in this vector is MM(MM+1)/2, where MM is the number of irreducible representations containing singly occupied molecular orbitals. There is no default. BETA = real_vector If OPENTYPE = SPECIAL, then this parameter gives the beta coupling coefficients. The number of elements in this vector is MM(MM+1)/2, where MM is the number of irreducible representations containing singly occupied molecular orbitals. There is no default. GUESS = string This option determines the type of initial guess at the eigenvector CSCF will use. The only valid option at the moment are : (1) GUESS = CORE, which causes it to use core Hamiltonian eigenvector to start the calculation; (2) GUESS = AUTO which results in an attempt to use the MO vector in the checkpoint file, or resorts to core guess if there is no eigenvector in that file. The default if AUTO. IPRINT = integer This is a print option. The default is 0. MO_OUT = boolean Prints out the orbitals with symmetry and occupations at the end of the calculation. Default is true. ROTATE = boolean The molecular orbitals will not be rotated if this is false. The rotation only affects the virtual orbitals for open shell systems. This parameter must be true for correlated gradients and it must be false for second and higher derivatives. The default is false if WFN = SCF and true otherwise. CHECK_ROT = boolean Check the molecular orbital rotation described above to ensure that no columns of the SCF eigenvector matrix are swapped by the rotation. Has no effect if ROTATE = false. The default is true. CHECK_MO_ORTHOGONALITY = boolean Check if the molecular orbitals are orthonormal. Useful for debugging only. The default is false. DIIS = boolean This determines whether diis will be used. The default is true. DIISSTART = integer This gives the first iteration for which DIIS will be used. The default is 0. NDIIS = integer This gives the number of error matrices to use in the diis procedure. The default is 6 for closed shell, 4 for open shell, and 3 for tcscf. DIISDAMP = real This gives the damping factor for the diis procedure. The default is 0.0 for closed shell, 0.02 for open shell, and 0.01 for tcscf. INCR = real This is used in tcscf to determine how often the ci coefficients are recalculated. A small number (~0.25) will cause them to be recalculated nearly every scf iteration. The default is 0.25. DYN_ACC = boolean When performing direct scf this specifies whether dynamic integral accuracy cutoffs will be used. Default is true (use dynamic cut- offs). Initial iterations are performed with integrals accurate to six digits. After density is converged to 10^-5 or 30 itera- tions are completed, full integral accuracy is used. If scf convergence problems are experienced disabling dynamic cutoffs by set- ting this variable to false might help. ORTHOG_ONLY = boolean Sometimes in CASSCF or other non-HF/KS schemes for orbital optimization, it is useful to reorthogonalize MO's from other geometries for the current geometry so they can be used as an initial guess for the new MO's. This can be performed by running CSCF with ORTHOG_ONLY = true. After the orbitals are orthogonalized, the program will quit without performing an SCF computation. This key- word will be ignored if there are no previous orbitals in the checkpoint file. Defaults to true if WFN = DETCAS. 30 May, 1991 cscf(1)