shorewall-maclist(5) [debian man page]

SHOREWALL-MACLIST(5)						  [FIXME: manual]					      SHOREWALL-MACLIST(5)

NAME

       maclist - Shorewall MAC Verification file

SYNOPSIS

       /etc/shorewall/maclist

DESCRIPTION

       This file is used to define the MAC addresses and optionally their associated IP addresses to be allowed to use the specified interface.
       The feature is enabled by using the maclist option in the shorewall-interfaces[1](5) or shorewall-hosts[2](5) configuration file.

       The columns in the file are as follows (where the column name is followed by a different name in parentheses, the different name is used in
       the alternate specification syntax).

       DISPOSITION - {ACCEPT|DROP|REJECT}[:log-level]
	   ACCEPT or DROP (if MACLIST_TABLE=filter in shorewall.conf[3](5), then REJECT is also allowed). If specified, the log-level causes
	   packets matching the rule to be logged at that level.

       INTERFACE - interface
	   Network interface to a host.

       MAC - address
	   MAC address of the host -- you do not need to use the Shorewall format for MAC addresses here. If IP ADDRESSESES is supplied then MAC
	   can be supplied as a dash (-)

       IP ADDRESSES (addresses) - [address[,address]...]
	   Optional - if specified, both the MAC and IP address must match. This column can contain a comma-separated list of host and/or subnet
	   addresses. If your kernel and iptables have iprange match support then IP address ranges are also allowed. Similarly, if your kernel
	   and iptables include ipset support than set names (prefixed by "+") are also allowed.

FILES

       /etc/shorewall/maclist

SEE ALSO

       http://shorewall.net/MAC_Validation.html

       http://shorewall.net/configuration_file_basics.htm#Pairs

       shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
       shorewall-ipsets(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
       shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
       shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5),
       shorewall-zones(5)

NOTES

	1. shorewall-interfaces
	   http://www.shorewall.net/manpages/shorewall-interfaces.html

	2. shorewall-hosts
	   http://www.shorewall.net/manpages/shorewall-hosts.html

	3. shorewall.conf
	   http://www.shorewall.net/manpages/shorewall.conf.html

[FIXME: source] 						    06/28/2012						      SHOREWALL-MACLIST(5)

SHOREWALL-NAT(5)						  [FIXME: manual]						  SHOREWALL-NAT(5)

NAME

       nat - Shorewall one-to-one NAT file

SYNOPSIS

       /etc/shorewall/nat

DESCRIPTION

       This file is used to define one-to-one Network Address Translation (NAT).

	   Warning
	   If all you want to do is simple port forwarding, do NOT use this file. See http://www.shorewall.net/FAQ.htm#faq1[1]. Also, in many
	   cases, Proxy ARP (shorewall-proxyarp[2](5)) is a better solution that one-to-one NAT.

       The columns in the file are as follows (where the column name is followed by a different name in parentheses, the different name is used in
       the alternate specification syntax).

       EXTERNAL - {address|COMMENT}
	   External IP Address - this should NOT be the primary IP address of the interface named in the next column and must not be a DNS Name.

	   If you put COMMENT in this column, the rest of the line will be attached as a comment to the Netfilter rule(s) generated by the
	   following entries in the file. The comment will appear delimited by "/* ... */" in the output of "shorewall show nat"

	   To stop the comment from being attached to further rules, simply include COMMENT on a line by itself.

       INTERFACE - interfacelist[:[digit]]
	   Interfaces that have the EXTERNAL address. If ADD_IP_ALIASES=Yes in shorewall.conf[3](5), Shorewall will automatically add the EXTERNAL
	   address to this interface. Also if ADD_IP_ALIASES=Yes, you may follow the interface name with ":" and a digit to indicate that you want
	   Shorewall to add the alias with this name (e.g., "eth0:0"). That allows you to see the alias with ifconfig.	That is the only thing
	   that this name is good for -- you cannot use it anwhere else in your Shorewall configuration.

	   Each interface must match an entry in shorewall-interfaces[4](5). Shorewall allows loose matches to wildcard entries in
	   shorewall-interfaces[4](5). For example, ppp0 in this file will match a shorewall-interfaces[4](5) entry that defines ppp+.

	   If you want to override ADD_IP_ALIASES=Yes for a particular entry, follow the interface name with ":" and no digit (e.g., "eth0:").

       INTERNAL - address
	   Internal Address (must not be a DNS Name).

       ALL INTERFACES (allints) - [Yes|No]
	   If Yes or yes, NAT will be effective from all hosts. If No or no (or left empty) then NAT will be effective only through the interface
	   named in the INTERFACE column.

       LOCAL - [Yes|No]
	   If Yes or yes, NAT will be effective from the firewall system

FILES

       /etc/shorewall/nat

SEE ALSO

       http://shorewall.net/NAT.htm

       http://shorewall.net/configuration_file_basics.htm#Pairs

       shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
       shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5), shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
       shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
       shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5),
       shorewall-zones(5)

NOTES

	1. http://www.shorewall.net/FAQ.htm#faq1
	   http://www.shorewall.net/manpages/../FAQ.htm#faq1

	2. shorewall-proxyarp
	   http://www.shorewall.net/manpages/shorewall-proxyarp.html

	3. shorewall.conf
	   http://www.shorewall.net/manpages/shorewall.conf.html

	4. shorewall-interfaces
	   http://www.shorewall.net/manpages/shorewall-interfaces.html

[FIXME: source] 						    06/28/2012							  SHOREWALL-NAT(5)