axctl(8) [debian man page]

AXCTL(8)						   Linux System Managers Manual 						  AXCTL(8)

NAME

       axctl - Configure/Kill running AX.25 connections.

SYNOPSIS

       axctl [-v] port dest src window|t1|t2|t3|n2|idle|paclen|kill [parm]

DESCRIPTION

       The  axctl  command  is designed to be a multi-function command that allows miscellaneous commands to be issued to the Linux AX.25 protocol
       layer for existing AX.25 connections. The connection is uniquely identified via the combination of port, destination  callsign  and  source
       callsign, with that information the kernel is able to change the parameters, or abort the connection.

       Many  of the options are similar to those found in axparms and perform the same function. Only one parameter may be changed on each invoka-
       tion of axctl.

OPTIONS

       -v		   Displays the version number.

       window window	   Sets the window size for the AX.25 connection.

       t1 t1-timeout	   Sets the initial T1 timeout value for the AX.25 connection, the value is given in seconds.

       t2 t2-timeout	   Sets the T2 timeout value for the AX.25 connection, the value is given in seconds.

       t3 t3-timeout	   Sets the T3 timeout value for the AX.25 connected, the value is given in seconds.

       n2 n2-count	   Sets the maximum number of tries for the AX.25 connection.

       idle idle-timeout   Sets the value for the idle timer for the AX.25 connection, the value is in minutes.

       paclen paclength    Sets the maximum packet length that may be transmitted on the AX.25 connection.

       kill		   Will abort an existing AX.25 connection.

FILES

       /etc/ax25/axports

SEE ALSO

       call(1), getsockopt(2), setsockopt(2), ax25(4), axparms(8), axports(5).

AUTHORS

       Joerg Reuter DL1BKE <jreuter@poboxes.com>

Linux								   2 August 1996							  AXCTL(8)

AXPARMS(8)						   Linux System Managers Manual 						AXPARMS(8)

NAME

       axparms - Configure AX.25 interfaces.

SYNOPSIS

       axparms --assoc|--forward|--route|--setcall|--version ...

DESCRIPTION

       The  axparms command is designed to be a multi-function command that allows miscellaneous commands to be issued to the Linux AX.25 protocol
       layer. It includes the functionality of axassociate and axsetcall which this command superceedes. The different modes of  the  command  are
       chosen by the first argument. Sunsequent arguments depend upon this argument and so no generalised command format can be given.

--assoc Argument
       The format of this option is:

       axparms --assoc <callsign> <username>
       axparms --assoc <callsign> delete
       axparms --assoc policy [default|deny]
       axparms --assoc show

       This option mainpulates the kernel uid/callsign mapping table, allowing callsigns to be associated and dis-associated with a user. The pol-
       icy option permits the superuser to have all other uid's either default to the actual port name, or to block traffic.

       At power up the table is blank and the policy is 'default', which is thus backward compatible.

--forward Argument
       Allows the use of many receivers with one transmitter, known as packet forwarding in many systems. The format of this command is:

       axparms --forward <portfrom> <portto>
       axparms --forward <portfrom> delete

       Any packets to be transmitted on port portfrom will be transmitted on port portto. This will stay in force until the  second  form  of  the
       command is issued which will remove the association.

--route Argument
       This  option  allows  the  internal AX.25 routing table to be manipulated. This table is available for reading in /proc/net/ax25_route, and
       will be built up dynamically by stations heard. However it is possible to add, delete and list entries via this option.

       The formats of this option are:

       axparms --route add <port> <callsign> [<digis>] [--ipmode V|D]
       axparms --route del <port> <callsign>
       axparms --route list

       Routes added via this command will not be removed from the internal routing table when they are "old" as normal entries are.  The  --ipmode
       option sets mode vc or mode datagram for this destination.

       If  the	<callsign> argument is set to "default" then this will set the default route for all outgoing AX.25 connections which will be used
       when there is no specific route to the required destination.

--setcall Argument
       The format of this option is:

       axparms --setcall <interface> <callsign>

       This changes the callsign associated at the given physical ax25 interface.

       Cave: The interface name is not the symbolic port name from axports, but the real interface name (from ifconfig(8)): ax0, ax1, .., sp0, ..,
       bpq0, ... etc..

       The change is permanent as long as the interface exists, or another "axparms --setcall" is issued.

       The interface has to exist already in order to use this option; it may be in state UP or DOWN.

--version Argument
       This option displays the version of the AX.25 utilities that axparms belongs to.

FILES

       /proc/net/ax25_bpqether
       /proc/net/ax25_calls
       /etc/ax25/axports

SEE ALSO

       call(1), getsockopt(2), setsockopt(2), ax25(4), axctl(8), axports(5).

AUTHORS

       Alan Cox GW4PTS <alan@cymru.net>
       Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk>
       Joerg Reuter DL1BKE <jreuter@poboxes.com>

Linux								   25 July 1997 							AXPARMS(8)